Jun camshaft .. Help !!

Eclipz · 06-04-2014, 11:04 AM

Elia ebyss, was anything done to the valvetrain during the instal, and are you on stock compression?

Sent from my SGH-T999L using Tapatalk

Elmo370z · 06-04-2014, 01:15 PM

Yes you can run stock compression, I'm pretty sure some stated the cams were intended to be used in a 100% stock motor, and you will see 15-20 horsepower from just that mod alone. But I think you have to reset the vvel.

1slow370 · 06-04-2014, 01:22 PM

Quote:

Originally Posted by Elmo370z

Yes you can run stock compression, I'm pretty sure some stated the cams were intended to be used in a 100% stock motor, and you will see 15-20 horsepower from just that mod alone. But I think you have to reset the vvel.

You will also have check the clearance between the cams and lifters to make sure they are in spec. If you don't best case is it didn't change, worse case there isn't enough clearance and you will melt something or run a valve into a piston, or if there is to much clearance it will slap around in there and either just break, or damage the cam from the pounding.

Edit: just so you know you need to do this any time you change cams, even if you put in another oe cam, it is best to do it whenever the head or block is decked as well in case the head gets distorted, basically any time you pull the head you should check it, it only takes 30 minutes.

brucelidat · 06-04-2014, 01:27 PM

Anyone know if the gains from the cams would be mostly high RPM peak or overall?

1slow370 · 06-04-2014, 01:39 PM

with more lift you will get an overall gain, with the duration increase it will shift the powerband up so i would expect it to move the power band up 500-1500rpm with small gains everywhere else. it is only exhaust and the timing comes in to play but I ould be surprised if it did something other than that. Also just to remind those who don't know it's all about restrictions so if through a bigger cam on a car with other restrictions you won't see the full benefit, as in if the cam flows 350hp but the exhaust only flows 300 you won't see it. same thing if the intake is choked.

ZKraken22 · 06-04-2014, 02:50 PM

Well if you guys want info you might want to look at cams on the 350z and what the gains the 350z had. Granted those have exhaust cams and intake but still. 3k price for 15-20 gain isn't bad. I would do this if I weren't saving for a GT-R so it would be pointless for me to do this cam install. If you have the cash stop waiting for other people to do something you obviously wanna do. What would be a regret? If you have a full bolt on Z then you'll obviously see gains. It's not rocket science. Like I said people spend this money on a simple exhaust with out complaining for what 5 to 10 hp? If I were keeping the z I'd take my car to Switzer performance in Ohio that are known for the GT-R work and get this done. Vendor Garageline have a set for sale for 700 shipped so you don't have to wait to get shipped in from japan. A lot of interested people about these cams now someone get some balls like OP. Don't bitch at OP for not having more info. He did what a lot of us want to do and said they work.

edub370 · 06-04-2014, 03:16 PM

Quote:

Originally Posted by ZKraken22

If you have the cash stop waiting for other people to do something you obviously wanna do. What would be a regret?

Lots of lost money, time, possibly performance, and a possible blown motor?

Eclipz · 06-04-2014, 04:15 PM

700 is a steal. Bruce, buy it

6MT-Z34 · 06-04-2014, 04:20 PM

Not trying to hijack the thread but what are your thoughts on the JUN auto throttle bodies? I believe they are enlarged 2mm for optimal performance and reliability...??

Sent from my XT1080 using Tapatalk

brucelidat · 06-04-2014, 05:34 PM

no one is bitching at the op for not having more info, we're glad he has the info that he does. There's just not enough info in general for many to go for it ta this point.

ZKraken22 · 06-04-2014, 05:52 PM

Quote:

Originally Posted by edub370

Lots of lost money, time, possibly performance, and a possible blown motor?

Oh Ethan that sounds like more of the worries of a turbo build to me. It's a cam install it's not hard but it's not easy either. It is what it is. If you only make 10 hp. Still see no reason to regret it. Lost money? I mean more money can be made it's replaceable if you have a career. If your worried about wasting money you shouldn't be modding a 370z period anyways. Don't get me wrong I understand where you are coming from buddy let's watch the nba finals tom

brucelidat · 06-04-2014, 06:13 PM

go Spurs

Navyboy916 · 06-04-2014, 06:42 PM

I did spend a lot of money for my install but I don't regret installing the cams at all even though I need more tuning time. I love the build. I know it's not a lot of power that most people expect but it's still a great addition to my car and it's very reliable. GTM built my heads and installed there durable parts.

brucelidat · 06-04-2014, 06:45 PM

Your build is great, it's just got so much in it that we can't figure out what is attributed to what in terms of improvements.

edub370 · 06-04-2014, 09:40 PM

Quote:

Originally Posted by ZKraken22

I understand where you are coming from buddy let's watch the nba finals tom

I'll be watching the cards and royals final game tomorrow. gotta watch kc take this series!

sooo op... dyno graph? video? anything?

06-04-2014, 01:27 PM	#94 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Anyone know if the gains from the cams would be mostly high RPM peak or overall? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

06-04-2014, 01:39 PM	#95 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	with more lift you will get an overall gain, with the duration increase it will shift the powerband up so i would expect it to move the power band up 500-1500rpm with small gains everywhere else. it is only exhaust and the timing comes in to play but I ould be surprised if it did something other than that. Also just to remind those who don't know it's all about restrictions so if through a bigger cam on a car with other restrictions you won't see the full benefit, as in if the cam flows 350hp but the exhaust only flows 300 you won't see it. same thing if the intake is choked. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

06-04-2014, 02:50 PM	#96 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 16	Well if you guys want info you might want to look at cams on the 350z and what the gains the 350z had. Granted those have exhaust cams and intake but still. 3k price for 15-20 gain isn't bad. I would do this if I weren't saving for a GT-R so it would be pointless for me to do this cam install. If you have the cash stop waiting for other people to do something you obviously wanna do. What would be a regret? If you have a full bolt on Z then you'll obviously see gains. It's not rocket science. Like I said people spend this money on a simple exhaust with out complaining for what 5 to 10 hp? If I were keeping the z I'd take my car to Switzer performance in Ohio that are known for the GT-R work and get this done. Vendor Garageline have a set for sale for 700 shipped so you don't have to wait to get shipped in from japan. A lot of interested people about these cams now someone get some balls like OP. Don't bitch at OP for not having more info. He did what a lot of us want to do and said they work. gtkiller, DEpointfive0, Elmo370z and 1 others like this. __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

06-04-2014, 04:15 PM	#98 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 11	700 is a steal. Bruce, buy it Last edited by Eclipz; 06-04-2014 at 05:36 PM.

06-04-2014, 05:34 PM	#100 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	no one is bitching at the op for not having more info, we're glad he has the info that he does. There's just not enough info in general for many to go for it ta this point. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

06-04-2014, 11:04 AM	#91 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 11	Elia ebyss, was anything done to the valvetrain during the instal, and are you on stock compression? Sent from my SGH-T999L using Tapatalk

06-04-2014, 01:15 PM	#92 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Yes you can run stock compression, I'm pretty sure some stated the cams were intended to be used in a 100% stock motor, and you will see 15-20 horsepower from just that mod alone. But I think you have to reset the vvel.

06-04-2014, 04:20 PM	#99 (permalink)
6MT-Z34 A True Z Fanatic Join Date: Jan 2013 Location: NJ Posts: 1,726 Drives: PW Z Rep Power: 15	Not trying to hijack the thread but what are your thoughts on the JUN auto throttle bodies? I believe they are enlarged 2mm for optimal performance and reliability...?? Sent from my XT1080 using Tapatalk

06-04-2014, 06:13 PM	#102 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	go Spurs ZKraken22 and megalapagas like this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

06-04-2014, 06:42 PM	#103 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	I did spend a lot of money for my install but I don't regret installing the cams at all even though I need more tuning time. I love the build. I know it's not a lot of power that most people expect but it's still a great addition to my car and it's very reliable. GTM built my heads and installed there durable parts.

06-04-2014, 06:45 PM	#104 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Your build is great, it's just got so much in it that we can't figure out what is attributed to what in terms of improvements. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
any word on NISMO R-TUNE camshaft upgradres?	need4speed	Engine & Drivetrain	6	09-10-2009 04:39 PM