Jun camshaft .. Help !!

Navyboy916 · 05-30-2014, 05:33 PM

You can run up to 12:5:1 on pumped gas that's the compression of the fr-s and brz boxer motor. You don't have to run e85 or even 100 octane. Did you retune the car and reset the vvel? What code was your check engine light throwing? Ask the tuner to tell you on the uprev program. When I started my car for the first time after the can install it didn't sound good and come to fine out the actuators need to be reset back to factory. The dealership has the program to reset the actuators. Go to the dealership that's your safest bet. Again I have no problems with my setup and went through the dealership

05-30-2014, 05:33 PM	#11 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	You can run up to 12:5:1 on pumped gas that's the compression of the fr-s and brz boxer motor. You don't have to run e85 or even 100 octane. Did you retune the car and reset the vvel? What code was your check engine light throwing? Ask the tuner to tell you on the uprev program. When I started my car for the first time after the can install it didn't sound good and come to fine out the actuators need to be reset back to factory. The dealership has the program to reset the actuators. Go to the dealership that's your safest bet. Again I have no problems with my setup and went through the dealership Last edited by Navyboy916; 05-30-2014 at 05:38 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
any word on NISMO R-TUNE camshaft upgradres?	need4speed	Engine & Drivetrain	6	09-10-2009 03:39 PM