400 whp on N/A VQ possible?

Elmo370z · 03-25-2016, 05:12 PM

EPS tuning. They ran a group buy, its over now. But you can still purchase them

lhinojos · 05-26-2016, 11:44 AM

This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a

Might be some help?
https://youtu.be/9u4hrFG4N70

Elmo370z · 05-26-2016, 12:50 PM

Quote:

Originally Posted by lhinojos

This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a

Might be some help?
https://youtu.be/9u4hrFG4N70

Thats a gnarly set up. I cant afford dry sump and hr head swap to do ITB's. I have plan next year to come close to 400whp on the vvel heads and still staying NA.

njobe89 · 05-26-2016, 01:04 PM

that's pretty amazing

Elmo370z · 05-26-2016, 01:20 PM

Quote:

Originally Posted by lhinojos

This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a

Might be some help?
https://youtu.be/9u4hrFG4N70

Thats sasha from onpoint dyno. That was testing for a BGTV for his build in Australia. He is also running a motec, that itself is like 10 grand. That car is a vq35 with a 370z oem crank i believe.

BGTV8 · 05-26-2016, 04:32 PM

Quote:

Originally Posted by Elmo370z

Thats sasha from onpoint dyno. That was testing for a BGTV for his build in Australia. He is also running a motec, that itself is like 10 grand. That car is a vq35 with a 370z oem crank i believe.

Correct, Sasha's engine is a VQ35HR block, race ported heads, JWT GrandAm spec pistons (12.5:1) and OEM 3.7 litre crank. My build is essentially the same but with a 92mm stroke crank for 4.0 litres.

Sasha runs race gas, I plan E85 so I can go higher in compression (13.5:1 at least).

Dieselg37s · 06-02-2016, 01:42 PM

I saw that video he has a nice setup is he running a dry sump as well?

Elmo370z · 06-02-2016, 03:02 PM

Yes. i believe so, to run and sustain running that much rpm. There isn't another solution to spin the motor that hard for a prolong period and want reliability.

Elmo370z · 10-27-2016, 07:11 PM

The build is in motion, just got a parts lists of everything i want. Now i just have to stack dead presidents. Target time August 2017.

Rusty · 10-27-2016, 07:49 PM

I'll just take this stack here.

Z eliminator · 10-27-2016, 09:50 PM

4.5 stroker n/a
with all the toys on it.
2017

Elmo370z · 10-28-2016, 01:55 AM

Quote:

Originally Posted by Rusty

I'll just take this stack here.

Elmo370z · 10-28-2016, 01:57 AM

Quote:

Originally Posted by Z eliminator

4.5 stroker n/a
with all the toys on it.
2017

I been following your build and say the least very excited about it. You still sticking with the vvel heads? Wonder how much power that v-8 ooo excuse v-6 will make.

Elmo370z · 12-27-2016, 07:02 PM

So are 1050 cc injectors too much for NA build?

Elmo370z · 12-27-2016, 07:04 PM

I plan on using e 85 for the most part

05-26-2016, 11:44 AM	#302 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a Might be some help? https://youtu.be/9u4hrFG4N70 Rusty and carlitos_370z like this.

05-26-2016, 01:04 PM	#304 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174284	that's pretty amazing __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

10-27-2016, 07:11 PM	#309 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,716 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	The build is in motion, just got a parts lists of everything i want. Now i just have to stack dead presidents. Target time August 2017. Rusty likes this.

10-27-2016, 09:50 PM	#311 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	4.5 stroker n/a with all the toys on it. 2017 __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

03-25-2016, 05:12 PM	#301 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,716 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	EPS tuning. They ran a group buy, its over now. But you can still purchase them

06-02-2016, 01:42 PM	#307 (permalink)
Dieselg37s Base Member Join Date: May 2014 Location: Nj Posts: 14 Drives: G37s Rep Power: 11	I saw that video he has a nice setup is he running a dry sump as well?

06-02-2016, 03:02 PM	#308 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,716 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Yes. i believe so, to run and sustain running that much rpm. There isn't another solution to spin the motor that hard for a prolong period and want reliability.

12-27-2016, 07:02 PM	#314 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,716 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	So are 1050 cc injectors too much for NA build?

12-27-2016, 07:04 PM	#315 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,716 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I plan on using e 85 for the most part