Urgent help please.

BGTV8 · 05-09-2014, 12:23 AM

Next time, get some 110v electrical flex and wrap it around the filter - you can use it like a "grinder" on a yacht to spin the fitter off - either that or a bigger hammer !!

axmea? · 05-09-2014, 01:56 AM

This is messed up. Thanks for sharing so people know what not to do or keep from happening.

onzedge · 05-09-2014, 05:48 AM

Quote:

Originally Posted by Limeybastard

Yeah. Thanks. Always hand tighten.

Son of ... Die. !

Sent from my SM-N900T using Tapatalk

I have seen this a few times myself.

Limeybastard · 05-09-2014, 09:39 AM

Quote:

Originally Posted by axmea?

This is messed up. Thanks for sharing so people know what not to do or keep from happening.

Indeed. Failure on this project did not end, when I went to lower the car I had the jack arm out at approx 45 degrees and the car bumper came crashing down on it, resulting in a ding in the lower center part of the bumper FML! I am sure heat gun will fix that tho, only size of a penny. - cue my next thread, "urgent help, I burnt paint off"

You'd think that I am a total noob at oil changes. All the cars I have had I used to change the oil and also brakes and tranny oil etc not many issues. Hell and I have a lot of cars I am like 43 years old!

onzedge · 05-09-2014, 09:41 AM

I try to be as sober as possible before I attempt any sort of work that involves tools.

SouthArk370Z · 05-09-2014, 09:41 AM

And so ends another episode of "Limeybastard." Tune in next week for more of his zany antics.

Limeybastard · 05-09-2014, 09:46 AM

Quote:

Originally Posted by onzedge

I try to be as sober as possible before I attempt any sort of work that involves tools.

You know what the irony is? I actually have been tee total for the last 2 weeks!

onzedge · 05-09-2014, 09:48 AM

Quote:

Originally Posted by Limeybastard

You know what the irony is? I actually have been tee total for the last 2 weeks!

I have been on the wagon for 13 years, 9 months and 13 days.

...not that I am counting.

JARblue · 05-09-2014, 09:54 AM

Quote:

Originally Posted by Limeybastard

You'd think that I am a total noob at oil changes. All the cars I have had I used to change the oil and also brakes and tranny oil etc not many issues. Hell and I have a lot of cars I am like 43 years old!

You're right. I did think that

At least you're entertaining

Quote:

Originally Posted by SouthArk370Z

And so ends another episode of "Limeybastard." Tune in next week for more of his zany antics.

Will do

SouthArk370Z · 05-09-2014, 09:55 AM

Quote:

Originally Posted by onzedge

I have been on the wagon for 13 years, 9 months and 13 days.

...not that I am counting.

onzedge · 05-09-2014, 09:55 AM

Quote:

Originally Posted by SouthArk370Z

JARblue · 05-09-2014, 09:58 AM

Quote:

Originally Posted by onzedge

I try to be as sober as possible before I attempt any sort of work that involves tools.

This is always how I begin. Depending on the work, this isn't always the case when I finish. I practically needed a six pack just to limber up so I could contort myself under the dash to install my RJM clutch pedal assembly. And then there's the time I didn't have all the tools, so I had to call my buddy to drive across town - I might have had a few too many while waiting as he had to finish up the work for me

Quote:

Originally Posted by onzedge

I have been on the wagon for 13 years, 9 months and 13 days.

...not that I am counting.

Well done

onzedge · 05-09-2014, 10:01 AM

Quote:

Originally Posted by JARblue

This is always how I begin. Depending on the work, this isn't always the case when I finish. I practically needed a six pack just to limber up so I could contort myself under the dash to install my RJM clutch pedal assembly. And then there's the time I didn't have all the tools, so I had to call my buddy to drive across town - I might have had a few too many while waiting as he had to finish up the work for me

Well done

Limeybastard · 05-09-2014, 10:22 AM

Quote:

Originally Posted by JARblue

You're right. I did think that

At least you're entertaining

Will do

Hey what can I say? I'd rather show my issues and failures so that other fellow Zed heads don't go through the same. Its all fun. :-)

Sent from my SM-N900T using Tapatalk

onzedge · 05-09-2014, 10:56 AM

Quote:

Originally Posted by Limeybastard

Hey what can I say? I'd rather show my issues and failures so that other fellow Zed heads don't go through the same. Its all fun. :-)

Sent from my SM-N900T using Tapatalk

You are a good man and you impress me with your willingness to be a human being here -- warts and all.

Good job, my friend.

05-09-2014, 01:56 AM	#32 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,234 Drives: WELL ZED PW 6MT Rep Power: 53241	This is messed up. Thanks for sharing so people know what not to do or keep from happening. blackcherry20 likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

05-09-2014, 09:41 AM	#35 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 63 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	I try to be as sober as possible before I attempt any sort of work that involves tools. Mitco39 likes this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

05-09-2014, 09:41 AM	#36 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	And so ends another episode of "Limeybastard." Tune in next week for more of his zany antics. onzedge, JARblue, Amj2020 and 2 others like this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Urgent help!!!New setup...	Andy124	Wheels & Tires	11	02-25-2015 05:52 PM
Need your help! Urgent!	wdkwang	Nissan 370Z General Discussions	3	01-12-2011 09:07 PM
Need some help urgent!!!!	makbc	South East Region	3	10-12-2010 11:29 AM
Urgent help plz.	Juruki	Nissan 370Z General Discussions	10	09-29-2010 07:12 AM
Urgent help needed...	6MT	Canada	2	09-27-2010 03:51 PM

05-09-2014, 12:23 AM	#31 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,513 Drives: 09 Nissan 370Z M6 Rep Power: 39973	Next time, get some 110v electrical flex and wrap it around the filter - you can use it like a "grinder" on a yacht to spin the fitter off - either that or a bigger hammer !!