Urgent help please.

Limeybastard · 05-08-2014, 09:22 PM

Not sure what ocured but when I removed the trolly jack handle the jack socket went into upright position. Now I cannot get the jack handle back in. Any advise ?

Sent from my SM-N900T using Tapatalk

blackcherry20 · 05-08-2014, 09:28 PM

Use a shorter socket wrench, a piece of pipe...are you serious?

Limeybastard · 05-08-2014, 09:29 PM

Quote:

Originally Posted by blackcherry20

Use a shorter socket wrench, a piece of pipe...are you serious?

Yes. Cannot get leverage with a socket wrench tried it already.

Sent from my SM-N900T using Tapatalk

Solomatrix · 05-08-2014, 09:33 PM

i dunno if you can get a really big strong person to lift up your car and then you can put the handle back in?

blackcherry20 · 05-08-2014, 09:38 PM

Has to be some kind of release other than the handle location. Find it.

NissanGuy23 · 05-08-2014, 09:38 PM

Get a second jack (like the factory one) and jack it up higher, pull that one out and lower..?

Limeybastard · 05-08-2014, 09:39 PM

Quote:

Originally Posted by blackcherry20

Has to be some kind of release other than the handle location. Find it.

I read the manual twice. There is a square key inside the handle location.

Sent from my SM-N900T using Tapatalk

onzedge · 05-08-2014, 09:45 PM

Quote:

Originally Posted by happydog

i dunno if you can get a really big strong person to lift up your car and then you can put the handle back in?

kenchan · 05-08-2014, 09:49 PM

Z-Girl 12 · 05-08-2014, 10:08 PM

I needed this laugh...

DEpointfive0 · 05-08-2014, 10:08 PM

Does the pedal raise or lower the car? I forgot

Limeybastard · 05-08-2014, 10:18 PM

Quote:

Originally Posted by DEpointfive0

Does the pedal raise or lower the car? I forgot

Dunno. Its stiff and under car.

Sent from my SM-N900T using Tapatalk

gomer_110 · 05-08-2014, 10:19 PM

Quote:

Originally Posted by DEpointfive0

Does the pedal raise or lower the car? I forgot

Pedal raises the jack (same as the normal handle).

@OP, with this jack there is no reason to take the handle out.

DEpointfive0 · 05-08-2014, 10:23 PM

Quote:

Originally Posted by gomer_110

Pedal raises the jack (same as the normal handle).

@OP, with this jack there is no reason to take the handle out.

I believe there is a screw to hold the handle in.

And couldn't he press the foot pedal down then move the place for the handle down easier?

gomer_110 · 05-08-2014, 10:29 PM

guessing if he can't get enough leverage on the handle receiver he won't be able to get enough on the pedal.

Best bet at this point is probably to get something on the square piece to lower the car onto the jack stands and then pull the jack out and put the handle in properly. USE THE SET SCREW SO THE HANDLE CAN'T COME OUT.

05-08-2014, 09:22 PM	#1 (permalink)
Limeybastard A True Z Fanatic Join Date: Apr 2014 Location: FL and London UK. Posts: 1,514 Drives: 2014 370Z Sport. Rep Power: 17	Urgent help please. Not sure what ocured but when I removed the trolly jack handle the jack socket went into upright position. Now I cannot get the jack handle back in. Any advise ? Sent from my SM-N900T using Tapatalk

05-08-2014, 09:28 PM	#2 (permalink)
blackcherry20 A True Z Fanatic Join Date: May 2012 Location: Southern Ohio Posts: 22,749 Drives: ‘17 badazz Z51 Rep Power: 240459	Use a shorter socket wrench, a piece of pipe...are you serious? onzedge, JARblue, FPenvy and 3 others like this. __________________ Grand Sport Corvette Arctic White

05-08-2014, 09:38 PM	#5 (permalink)
blackcherry20 A True Z Fanatic Join Date: May 2012 Location: Southern Ohio Posts: 22,749 Drives: ‘17 badazz Z51 Rep Power: 240459	Has to be some kind of release other than the handle location. Find it. __________________ Grand Sport Corvette Arctic White

05-08-2014, 09:38 PM	#6 (permalink)
NissanGuy23 Track Member Join Date: Oct 2011 Location: West Chester, PA Age: 36 Posts: 752 Drives: 09 370Z NISMO PG 6MT Rep Power: 15	Get a second jack (like the factory one) and jack it up higher, pull that one out and lower..? Jordo!, mayday813, DEpointfive0 and 1 others like this.

05-08-2014, 10:08 PM	#10 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11716	I needed this laugh... __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

05-08-2014, 09:33 PM	#4 (permalink)
Solomatrix A True Z Fanatic Join Date: Mar 2014 Location: crispy bacon Posts: 3,236 Drives: sizzling bacon Rep Power: 858	i dunno if you can get a really big strong person to lift up your car and then you can put the handle back in?

05-08-2014, 09:49 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521

05-08-2014, 10:08 PM	#11 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Does the pedal raise or lower the car? I forgot __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

05-08-2014, 10:29 PM	#15 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	guessing if he can't get enough leverage on the handle receiver he won't be able to get enough on the pedal. Best bet at this point is probably to get something on the square piece to lower the car onto the jack stands and then pull the jack out and put the handle in properly. USE THE SET SCREW SO THE HANDLE CAN'T COME OUT. blackcherry20 likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Urgent help!!!New setup...	Andy124	Wheels & Tires	11	02-25-2015 06:52 PM
Need your help! Urgent!	wdkwang	Nissan 370Z General Discussions	3	01-12-2011 10:07 PM
Need some help urgent!!!!	makbc	South East Region	3	10-12-2010 12:29 PM
Urgent help plz.	Juruki	Nissan 370Z General Discussions	10	09-29-2010 08:12 AM
Urgent help needed...	6MT	Canada	2	09-27-2010 04:51 PM