TSM makes 357RWHP NA on a Stock Longblock VQ37

FPenvy

372,385-390? do you mean 272, 285-290 i'm guessing?

seems like anyone with GA or ATL in their location spot are the ones backing all this. either it is something with the location or just friends helping friends lol

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Chuck33079

One run down the strip puts all this to bed.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

daisuke149

yeah 2 lolol. 3 woulda been something.

Not backing them due to friends, backing them because i see all the dyno's constantly posted by people all over the country. Because my own car has hit multiple dyno's in the GA area also as have alot of the cars in this area.

and yes a run down the strip could prove something. But then again, a run on the strip at GA with 90degrees and 70% humidity will yield diff results than the same car same strip at 67 degrees and 10% humidity (and the way GA weather is, this could be the same day!)

Chuck33079

GA doesn't have the market cornered on heat and humidity. Trap speed would tell a lot more than one overcorrected dyno plot with a baseline from another car no matter what outside temps are.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

FPenvy

most people here will understand the ET/trap difference based on weather conditions if they list them. most strips post the current conditions on the time slip. not all but most do that i've been to or seen.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

FPenvy

yea come to PA lol worlds most diverse climate. this winter we had a month where we didnt break 0 and in summer it'll be 90's and 100% humidity FML just thinking about it lol thank you 34 row oil cooler.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Megan370z

In my opinion and the testing Ive done in the pass tells me there is much more the VVEL engine can give than what we been used to..

I mostly always did a (before / after) after each modification and its has been repeatable every time.

2 years ago I managed a gain of 68whp and with the current knowledge that we gathered for the pass year . I have no doubt about this 80+gain especially with E85 which proved gain in N/A form same with good race gas, also add the fact the VVEL is now fully tunable by Pro Tuner which can add quite a bit depending on your intake/exhaust setup

at 360whp their 3'' single is actually restricting the flow just saying.

__________________
Megan Journal *Click Me* ....................One Man Team Motorsport *Click Me*

jwick

I need to get on that dyno. I'd probably make 550whp

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

TheBoomSpoon

You trapped 110.74 right. That seems highest trap ive seen without 4.08 gears.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

TheBoomSpoon

E85 always the unmentioned mod. Larger injectors and whatever else is required for e85 simply isnt normally in the heads of ppl when we think NA 370z.

Waych yhe 360 whp car do the qtt at 12.6 - 12.7 only then to be told, oh yeah i have 4.08 gears.

Plus manual vs auto effecys dyno #s i was told m370 affects my peak hp (lower), my point a million variables, spend 20 bucks and jam it down the qtr. Im no drag expert and at least in the 7at its pretty damn easy

Sent from my SAMSUNG-SGH-I747 using Tapatalk

FPenvy

yes 110.74 and i'm on stock gears.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

TheBoomSpoon

Me too but its stupid difficult to go 4.08 on the 7at. Nobody wants anything to with that project so im stock gear also. Was told i would have to buy another quaife for manual after doing gears sincr the onr i have for auto id need to sell or eat it.



Sent from my SAMSUNG-SGH-I747 using Tapatalk

synolimit

I was 106.5 with just a CBE with some gutting. I'm at least 15hp more now with another 50-100lbs lost. You saying gears will provide faster traps without more power?

__________________
13 370z-

TheBoomSpoon

i would think so but i may be completely wrong, i just drive it.

If i had manual though getting 4.08 would be my first mod before adding power because thats significant butt dyno u will feel

Sent from my SAMSUNG-SGH-I747 using Tapatalk

synolimit

My "secret sauce" will be done soon but I'll share.

OEM TB- 2.6" to 2.35" to 2.39".
New TB- 2.6" to 2.55" all the way through.

OEM mani ported to 2.55" at the TB connection and smoothed out runners port matched to the lower mani. Lower mani port and polished as much as possible.

Lowest base I have is 280hp 226tq on a dynojet SAE with rpf1 18" wheels with light weight tires (like 12lbs off OEM), custom cai with OEM accordion post MAF tubes, and topspeed pro 1 true dual CBE with added 18" vibrant resonators.

Then 295hp 243tq same dyno SAE with added Z1 MAF post tubes, muffler delete, Helmholtz resonators added to the X pipe, and ebay LTH wrapped.

Soon will be port and polished TB's and mani's with a tune.

Then maybe later e85, ID 1000's and a walbro 255 with retune.

I'll always do SAE but maybe I'll do a STD to show a difference from our DJ to Z1 and TSM since their two read so much higher than everyone else. If I can't reach 230hp, Z1 and TSM are aiding the dyno numbers. Since both dyno's have had the same tuner involved working on them, I smell something fishy unless I can show similar results.

__________________
13 370z-