In some serious trouble, it broke...

OldBoy · 04-02-2014, 06:44 PM

Quote:

Originally Posted by Joepro

Well I wasted all day yesterday, but found it, the pressure plate broke.

Glad its just the plate. I think the other guy who had a broken clutch had a Southbend also but it was the disc that fragmented.

Are they sending you a whole new clutch assembly w/ a new flywheel or are they just replacing the pressure plate?

Joepro · 04-02-2014, 06:53 PM

Flywheel is fine as is the disk, but I am replacing the disk anyway since it is apart. S%t breaks, Shane at work has broke 4 clutches in 2 years with his neon, one ACT,another single disk I forget the brand, and broke a pressure plate and a disk twice on a clutch masters twin disk...

Fountainhead · 04-02-2014, 07:42 PM

Hey Joepro, I like how you painted your engine/intake cover to match your car. I would paint mine but my car is platinum grey/silver already...

PS Don't forget to change the CSC, I think it gets extended onto the dirty part of the sleeve when the bell housing is pulled and the O-Ring picks up serious contamination.

Joepro · 04-02-2014, 08:08 PM

I have a zspeed csc in there an It doesn't have a ton of miles on it, im gonna roll with it.

Mike · 04-02-2014, 09:03 PM

glad its nothing serious!

Joepro · 04-02-2014, 09:06 PM

Joe shipped it immediately, will be at the house tomorrow, should be back on the road before I know it, I left the tranny strapped to the jack so I can plop it right back in.

jwick · 04-02-2014, 09:48 PM

That's gotta make you feel better. So free rep for those of us that said clutch?

Joepro · 04-02-2014, 09:52 PM

That was matts first guess just wanted to avoid pulling the trans because all the turbo pipes have to come off after that I I have it down second, ours trans are fairly easy,to pull

elperuano · 04-02-2014, 09:59 PM

Quote:

Originally Posted by jwick

That's gotta make you feel better. So free rep for those of us that said clutch?

Lol.

fuct · 04-03-2014, 12:00 PM

haha i didnt know people still cared about the rep stuff.

wheee! · 04-03-2014, 12:25 PM

Quote:

Originally Posted by OldBoy

Glad its just the plate. I think the other guy who had a broken clutch had a Southbend also but it was the disc that fragmented.

Are they sending you a whole new clutch assembly w/ a new flywheel or are they just replacing the pressure plate?

That was Mitco... and he was doing 7500rpm 2nd gear launches lol

Gregor12 · 04-03-2014, 12:28 PM

Quote:

Originally Posted by Joepro

Well I wasted all day yesterday, but found it, the pressure plate broke.

I just read every post of this thread and it made me super anxious to find out what it was and the whole time I was thinking maybe he should drop the trans and check out all the rotating components... glad it wasn't knocking or something worse!!! thought you were seriously pulling an april fools joke on us

Mitco39 · 04-03-2014, 12:53 PM

Quote:

Originally Posted by wheee!

That was Mitco... and he was doing 7500rpm 2nd gear launches lol

Hello, Hi!

Joepro · 04-03-2014, 01:55 PM

Fedex just dropped the clutch at the house, stupid work.

jwick · 04-03-2014, 03:49 PM

Quote:

Originally Posted by Joepro

Fedex just dropped the clutch at the house, stupid work.

I have everything shipped to the office.

04-02-2014, 06:53 PM	#77 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Flywheel is fine as is the disk, but I am replacing the disk anyway since it is apart. S%t breaks, Shane at work has broke 4 clutches in 2 years with his neon, one ACT,another single disk I forget the brand, and broke a pressure plate and a disk twice on a clutch masters twin disk... __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 04-02-2014 at 06:55 PM.

04-02-2014, 08:08 PM	#79 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	I have a zspeed csc in there an It doesn't have a ton of miles on it, im gonna roll with it. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-02-2014, 09:03 PM	#80 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	glad its nothing serious! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

04-02-2014, 09:06 PM	#81 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Joe shipped it immediately, will be at the house tomorrow, should be back on the road before I know it, I left the tranny strapped to the jack so I can plop it right back in. jwick and TedB370z like this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-02-2014, 09:48 PM	#82 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	That's gotta make you feel better. So free rep for those of us that said clutch? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-02-2014, 07:42 PM	#78 (permalink)
Fountainhead Track Member Join Date: Feb 2013 Location: FL Posts: 834 Drives: 2019 Civic Type R Rep Power: 14	Hey Joepro, I like how you painted your engine/intake cover to match your car. I would paint mine but my car is platinum grey/silver already... PS Don't forget to change the CSC, I think it gets extended onto the dirty part of the sleeve when the bell housing is pulled and the O-Ring picks up serious contamination.

04-02-2014, 09:52 PM	#83 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	That was matts first guess just wanted to avoid pulling the trans because all the turbo pipes have to come off after that I I have it down second, ours trans are fairly easy,to pull __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-03-2014, 12:00 PM	#85 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	haha i didnt know people still cared about the rep stuff.

04-03-2014, 01:55 PM	#89 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Fedex just dropped the clutch at the house, stupid work. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP Broke DOWN!!	ANMVQ	Forced Induction	108	03-24-2013 06:13 AM
Yep. Broke My Rib.	CBRich	The Lounge (Off Topic)	18	09-05-2010 08:33 AM
Z Broke Down :(	FuszNissan	Nissan 370Z General Discussions	318	09-15-2009 07:58 AM
Having trouble picking a Z.. and having trouble with the manual	AceSpade77	Nissan 370Z General Discussions	12	08-04-2009 05:02 PM
my Z broke down	sideburnZ	Nissan 370Z General Discussions	32	05-26-2009 10:33 AM