JTran Motorsports basic shortblock details

O&G · 03-12-2014, 04:50 PM

For those interested in a complete longblock build I have attached an estimate.

You will need to send your entire motor to us. If you supply a legit block you will have a $500 credit. Shipping will vary on your location.

Sorry about the quality, $8,900 without your block, $8,400 with your block.

Motor will be ready to drop back in your car!

jwick · 03-12-2014, 05:58 PM

Quote:

Originally Posted by O&G

For those interested in a complete longblock build I have attached an estimate.

You will need to send your entire motor to us. If you supply a legit block you will have a $500 credit. Shipping will vary on your location.

Sorry about the quality, $8,900 without your block, $8,400 with your block.

Motor will be ready to drop back in your car!

O&G - Just to clarify the cost is $8,900 for the entire longblock (i.e. new heads, etc) or it's $8,900 to assemble long block with your existing heads and stuff with just the short block being new? Reason I ask is because $500 credit for us supplying a complete longblock seams a little odd since that's the same credit for supplying block for short block build.

jwick · 03-12-2014, 05:58 PM

Quote:

Originally Posted by Chuck33079

Yeah, that's still cheap. I was expecting them to cost more. For that cost I would rather have the fresh one.

Agreed

O&G · 03-12-2014, 06:01 PM

No, your heads will be sent to the machine shop and pressure tested and decked if required. The credit is only for the block. Your heads will be reused, unless you want to be super badass and upgrade exhaust cams, oversized valves, etc..., which in that case you could still use your original heads.

jwick · 03-12-2014, 06:35 PM

Ok. Cool, I'll get some more details when I stop by on Saturday

O&G · 03-12-2014, 06:40 PM

Quote:

Originally Posted by jwick

Ok. Cool, I'll get some more details when I stop by on Saturday

See you then buddy!

elperuano · 03-12-2014, 07:09 PM

Does anyone have a built head?

O&G · 03-12-2014, 09:44 PM

Quote:

Originally Posted by elperuano

Does anyone have a built head?

Not that I know of, but I'm sure there is somebody out there.

fuct · 03-13-2014, 09:04 AM

Quote:

Originally Posted by O&G

For those interested in a complete longblock build I have attached an estimate.

You will need to send your entire motor to us. If you supply a legit block you will have a $500 credit. Shipping will vary on your location.

Sorry about the quality, $8,900 without your block, $8,400 with your block.

Motor will be ready to drop back in your car!

Im hoping im not crazy but i think the tax is wrong on the form. i get $732.85 for tax.....

O&G · 03-13-2014, 11:19 AM

I'll ask about the tax, this was for a customer out of state.

jwick · 03-13-2014, 11:56 AM

Quote:

Originally Posted by O&G

I'll ask about the tax, this was for a customer out of state.

That would make since and remember that typically labor is not taxed

DIGItonium · 03-13-2014, 01:49 PM

Ooh interesting. Another stupid question. So does this include the labor involved cleaning the head and valve assembly as well? Literally under $9k for a drop in long block build is not too shabby especially with the attention to detail involved. How about I just drop my car off?

O&G · 03-13-2014, 02:11 PM

Quote:

Originally Posted by DIGItonium

Ooh interesting. Another stupid question. So does this include the labor involved cleaning the head and valve assembly as well? Literally under $9k for a drop in long block build is not too shabby especially with the attention to detail involved. How about I just drop my car off?

That is correct, longblock fully complete ready to be dropped back in your car. Give us a call when your ready sir!

jwick · 03-13-2014, 02:25 PM

Quote:

Originally Posted by DIGItonium

Ooh interesting. Another stupid question. So does this include the labor involved cleaning the head and valve assembly as well? Literally under $9k for a drop in long block build is not too shabby especially with the attention to detail involved. How about I just drop my car off?

Come on down and join the JTran car family. Waters warm!

O&G · 03-20-2014, 03:01 PM

Another VQ35HR carrillo rods arias pistons and some mad scientist love!

sent from my Samsung Galaxy Note

03-12-2014, 04:50 PM	#31 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	For those interested in a complete longblock build I have attached an estimate. You will need to send your entire motor to us. If you supply a legit block you will have a $500 credit. Shipping will vary on your location. Sorry about the quality, $8,900 without your block, $8,400 with your block. Motor will be ready to drop back in your car! DIGItonium, GaleForce and elperuano like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal Last edited by O&G; 03-12-2014 at 04:52 PM.

03-12-2014, 06:01 PM	#34 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	No, your heads will be sent to the machine shop and pressure tested and decked if required. The credit is only for the block. Your heads will be reused, unless you want to be super badass and upgrade exhaust cams, oversized valves, etc..., which in that case you could still use your original heads. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal Last edited by O&G; 03-12-2014 at 06:03 PM.

03-12-2014, 06:35 PM	#35 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Ok. Cool, I'll get some more details when I stop by on Saturday __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-13-2014, 11:19 AM	#40 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	I'll ask about the tax, this was for a customer out of state. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-13-2014, 01:49 PM	#42 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Ooh interesting. Another stupid question. So does this include the labor involved cleaning the head and valve assembly as well? Literally under $9k for a drop in long block build is not too shabby especially with the attention to detail involved. How about I just drop my car off? __________________

03-12-2014, 07:09 PM	#37 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Does anyone have a built head?

03-20-2014, 03:01 PM	#45 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Another VQ35HR carrillo rods arias pistons and some mad scientist love! sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forged shortblock	A-CRAZY	Engine & Drivetrain	1	12-09-2012 03:09 PM
Z1 Motorsports 24hr Black Friday Sale (More details inside)	Dustin@Z1	Sponsor Classifieds	4	11-26-2011 08:39 PM
Z1 Motorsports 24hr Black Friday Sale (More details inside)	Dustin@Z1	Z1 Motorsports	8	11-25-2011 12:20 PM
I want a built shortblock but....	NYBladeZ	Engine & Drivetrain	27	08-18-2010 03:21 AM
GT Motorsports: Fuel solutions for your VQ35DE, HR, and VHR - From basic to extreme!	George@GTM	Forced Induction	7	12-26-2008 11:05 PM