Built Engine Complete

jwick · 02-22-2014, 11:50 AM

Quote:

Originally Posted by O&G

I'll be here all day and night, stop by and we will shoot the sh*t! I'm very excited to have someone with a BP kit here in Texas. Sasha does great work! You'll have to bring her by once you guys finish the install!

Will do. probably be 3-4ish

jwick · 02-22-2014, 12:27 PM

O&G, you at the shop now?

O&G · 02-22-2014, 03:54 PM

Yes sir, ask for Justin

sent from my Samsung Galaxy Note

jwick · 02-22-2014, 11:40 PM

Awesome time shooting the sh!t with you today. The work you and Johnny have done on your ride is most impressive. I can't wait until it's actually on the street again. Anytime you need another set of hands to assist with your build give me a holla brotha and I'll be there.

O&G · 02-22-2014, 11:57 PM

Really appreciate that man. Was a pleasure having you at the shop 2day. Your welcome anytime! I think I might be just as excited as you 2 have a BP kit in Texas and another low mount homie! Send pics when you get started! Ill swing through the house and check out the IS race car 2!

sent from my Samsung Galaxy Note

jwick · 02-23-2014, 12:09 AM

Quote:

Originally Posted by O&G

Really appreciate that man. Was a pleasure having you at the shop 2day. Your welcome anytime! I think I might be just as excited as you 2 have a BP kit in Texas and another low mount homie! Send pics when you get started! Ill swing through the house and check out the IS race car 2!

sent from my Samsung Galaxy Note

Most definitely will be sending pictures. You are most welcome to come by when we are ****!ng with the track car. I always welcome another gearhead to make sure that what we're doing is not an alcohol related bonehead move.

I'm going to come by next Saturday to discuss some build stuff with Johnny so I'll probably see you there.

O&G · 02-23-2014, 12:18 AM

For sure....figure out that code too and maybe pull up the wirring diagram for that dimmer line for the greddy gauge!

sent from my Samsung Galaxy Note

jwick · 02-23-2014, 12:20 AM

Quote:

Originally Posted by O&G

For sure....figure out that code too and maybe pull up the wirring diagram for that dimmer line for the greddy gauge!

sent from my Samsung Galaxy Note

That would be great. I have so much more confidence that Johnny will figure it out before the dealer does.

O&G · 02-23-2014, 12:25 AM

Quote:

Originally Posted by jwick

That would be great. I have so much more confidence that Johnny will figure it out before the dealer does.

I don't doubt it at all lol.... Dealerships FTL

sent from my Samsung Galaxy Note

Wonka2581 · 02-23-2014, 12:26 AM

Subd

jwick · 02-23-2014, 12:31 AM

Quote:

Originally Posted by O&G

I don't doubt it at all lol.... Dealerships FTL

sent from my Samsung Galaxy Note

The stealership keeps thinking its a crusie control issue. I continue to tell them that the cruise control indicator coming on is just a symptom of something else being wrong but they don't listen. Maybe it's time to transfer my service from West Houston to Southwest.

Worse case I'll bring it over after hours and we can mess with it until we figure it out and while we're at it get your beast back on the road.

O&G · 03-04-2014, 11:38 PM

Anyone needing a built motor for the VQ platform please call JTran Motosports out of Houston and like their FB page to see progress and updates on their work. 2 more VQ35HR's completed this week with 3 vQ37VHR built motors under their belt. Ask for Amber and she will get you a quote.

sent from my Samsung Galaxy Note

DIGItonium · 03-11-2014, 01:25 PM

@O&G, it seems like you had your build done in a timely manner. Less than 6 months altogether? So you dropped off your car to have them drop the motor to rebuild and reassemble the entire kit? $3k worth of upgraded parts makes sense other than the labor. I'm thinking about coating and/or getting some parts shot peened. [shrugs]

If I ever decide to embark on this project, I'd probably keep the same GTM kit, but make some upgrades and refresh some components as well (turbo CHRAs, lines, etc.).

Overall, nice build and congrats!

O&G · 03-11-2014, 07:18 PM

Quote:

Originally Posted by DIGItonium

@O&G, it seems like you had your build done in a timely manner. Less than 6 months altogether? So you dropped off your car to have them drop the motor to rebuild and reassemble the entire kit? $3k worth of upgraded parts makes sense other than the labor. I'm thinking about coating and/or getting some parts shot peened. [shrugs]

If I ever decide to embark on this project, I'd probably keep the same GTM kit, but make some upgrades and refresh some components as well (turbo CHRAs, lines, etc.).

Overall, nice build and congrats!

Thank you sir. Only reason mine took so long as I did most the work myself and messed up a few things. I incorrectly installed the cam caps on the passenger side bank so the VVEL assembly didn't rotate correctly. I thought it was an electrical issue, so I replace the VVEL solinoide and problem solved for days. Gave up, came back to it. JTran figured out the problem, installed the cam caps in the right order and boom, started up like a champ. If you were to pay to have this done it would be done a lot faster as I wouldn't be doing the work LOL.

Live and learn, and I now know everything there is to know about VVEL and the VQ37VHR lol.

02-22-2014, 12:27 PM	#32 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	O&G, you at the shop now? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

02-22-2014, 03:54 PM	#33 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Yes sir, ask for Justin sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

02-22-2014, 11:40 PM	#34 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Awesome time shooting the sh!t with you today. The work you and Johnny have done on your ride is most impressive. I can't wait until it's actually on the street again. Anytime you need another set of hands to assist with your build give me a holla brotha and I'll be there. O&G likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

02-22-2014, 11:57 PM	#35 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Really appreciate that man. Was a pleasure having you at the shop 2day. Your welcome anytime! I think I might be just as excited as you 2 have a BP kit in Texas and another low mount homie! Send pics when you get started! Ill swing through the house and check out the IS race car 2! sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

02-23-2014, 12:18 AM	#37 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	For sure....figure out that code too and maybe pull up the wirring diagram for that dimmer line for the greddy gauge! sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

02-23-2014, 12:26 AM	#40 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	Subd O&G likes this. __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

03-04-2014, 11:38 PM	#42 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Anyone needing a built motor for the VQ platform please call JTran Motosports out of Houston and like their FB page to see progress and updates on their work. 2 more VQ35HR's completed this week with 3 vQ37VHR built motors under their belt. Ask for Amber and she will get you a quote. sent from my Samsung Galaxy Note NismOrly22 likes this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-11-2014, 01:25 PM	#43 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	@O&G, it seems like you had your build done in a timely manner. Less than 6 months altogether? So you dropped off your car to have them drop the motor to rebuild and reassemble the entire kit? $3k worth of upgraded parts makes sense other than the labor. I'm thinking about coating and/or getting some parts shot peened. [shrugs] If I ever decide to embark on this project, I'd probably keep the same GTM kit, but make some upgrades and refresh some components as well (turbo CHRAs, lines, etc.). Overall, nice build and congrats! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 07:09 PM
Built Engine Blackstone Labs oil analysis report	Mr.Squeeze	Forced Induction	7	08-27-2013 09:31 AM
[FOR SALE] VQ37VHR built Engine 4.0L & GTM Stage 2 Supercharger kit	boraturbo	Parts for sale (Private Classifieds)	27	09-28-2012 08:22 AM
[WTB] Looking for a short block or complete working engine vq37vhr	Nismo370	Parts for sale (Private Classifieds)	1	06-03-2012 10:28 PM
complete engine overhaul questions.	chii370	Engine & Drivetrain	129	12-31-2011 01:52 AM