For the record, I've checked codes and had the MAF sensors cleaned. Up next will be cleaning the TBs and then a spark plug change.
|
|
LinkBack | Thread Tools | Display Modes |
06-19-2014, 08:58 PM | #31 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Austin
Posts: 14,196
Drives: 2016 Mazda 6
Rep Power: 211844 |
For the record, I've checked codes and had the MAF sensors cleaned. Up next will be cleaning the TBs and then a spark plug change.
__________________
Tracie |
06-19-2014, 10:35 PM | #32 (permalink) |
Enthusiast Member
Join Date: May 2013
Location: McAllen,TX
Posts: 457
Drives: '10 370Z Tour A/T
Rep Power: 12 |
GLWT hope your Z gets up to par
__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* | |
06-20-2014, 08:22 PM | #33 (permalink) |
Base Member
Join Date: Jan 2013
Location: Houston
Posts: 169
Drives: 2011 370Z
Rep Power: 12 |
Pint,
I've been having the same issue over the last 2 months. The problem is very random like you said, but lately I've been trying to zero down on the culprit. Here's the info I've gathered so far and I hope it helps people here. 2011 Base Z - Auto - 50k miles K&N Typhoon, BERK HFC, BERK CBE - K&N Filters cleaned - MAF haven't touched - Spark plugs haven't touched - Oil Change Full Synthetic Mobil 1 @ 49k miles - New Battery - Fuel pump and TB cleaned The car ran smooth for about a week after getting the fuel pump and TB cleaned at Baker Nissan in Houston. After that the starting issue happened again. Took 4 tries before it would start. Just yesterday I was traveling across town at 5pm rush hour in 97 degrees weather. A lot of stop and go with my AC on. After about an hour I noticed that my RPM was dropping very low when braking in traffic. I turned off the AC to see if that was the issue. My RPM stopped dropping low after that but this needs more feedback and testing if anyone can help. I guess this also confirms that heat plays a role. Also on Tuesday 6/17 I got off work and my car wouldn't start. I just replaced the battery 2 weeks before. Coworker gave me a jump and since then the car has been fine. I don't know what drained a new battery once and then work fine afterwards. Could this be connected to the RPM start issue? UPDATE 6/20 11:50pm : Just was about to get a midnight snack but car battery is dead. I think its my factory car alarm that's draining the battery since this was the only time I didn't lock it since the first time my battery died.
__________________
2011 Magnetic Black 370Z | K&N | BERK | SWIFT | SPC | AVANT GARDE Last edited by andbui05; 06-21-2014 at 12:49 AM. |
06-21-2014, 09:29 PM | #34 (permalink) | |
Base Member
Join Date: Feb 2014
Location: Los Angeles, CA
Posts: 133
Drives: 2010 370Z Roadster
Rep Power: 12 |
Quote:
N55 DCT stalling/dying at idle - Page 7
__________________
'10 370Z Roadster Touring w/sports, navi |
|
06-27-2014, 04:34 AM | #35 (permalink) |
Track Member
Join Date: Jan 2011
Location: Pensacola florida
Posts: 679
Drives: 2010
Rep Power: 15 |
Any updates ?
__________________
2010 Monterey blue roadster Z Touring. Blk interior. g3,fast intentions exhaust,more to come. RIP 05 Silverstone 350z roadster mild N/A build. |
06-28-2014, 10:33 PM | #36 (permalink) |
Base Member
Join Date: Mar 2012
Location: Austin
Posts: 38
Drives: 2012 Nismo 370z
Rep Power: 13 |
Hey, Pintsize725. I think I may be having the same problem as you. My Nismo started ding that earlier this evening. I've had a full tank of gas for about a day now. I ran to subway to get something. It started up like normal. I was in the store for about 10 to 15 min. I came out and it took 3 tries; on the last try I pressed the gas pedal down a bit and it started. Luckily, there weren't any other cars around, but it was embarrassing to say the least. I've had the Gen 3 Stillen intakes for about a year with probably close to 20,000 miles on them. Does anyone know if the dealer cleans them with the scheduled maintenance? I had the 30,000 mile one done a couple of months back, and I'm wondering if they even touched the intakes. They were installed by Nissan back in New Orleans. I'm dreading the bumper removal bit :-/
__________________
2012 Nismo Current mods: Stillen G3 Intake, NonStopTuning Underdrive crank pulley |
06-28-2014, 10:45 PM | #37 (permalink) | |
A True Z Fanatic
Join Date: Jan 2012
Location: Austin
Posts: 14,196
Drives: 2016 Mazda 6
Rep Power: 211844 |
Quote:
__________________
Tracie |
|
06-28-2014, 10:53 PM | #38 (permalink) |
Base Member
Join Date: Mar 2012
Location: Austin
Posts: 38
Drives: 2012 Nismo 370z
Rep Power: 13 |
I guess they would clean the sensors, but I was asking about the Stillen conical filters. I feel your pain. I definitely want to get to the bottom of it sooner rather than later since it's my daily driver. I plan on going to the dealership on Monday to get it checked out. If I get any hassle from them, I'm going to bring it over to the Z clinic.
__________________
2012 Nismo Current mods: Stillen G3 Intake, NonStopTuning Underdrive crank pulley |
06-28-2014, 11:01 PM | #40 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Austin
Posts: 14,196
Drives: 2016 Mazda 6
Rep Power: 211844 |
I need to find someone to clean my TBs to see if it fixes it. I also feel like it might be part of a cooling/AC issue since I always have the AC on and run around in the Z during the hottest parts of the day. :/
__________________
Tracie |
06-28-2014, 11:03 PM | #41 (permalink) |
Base Member
Join Date: Mar 2012
Location: Austin
Posts: 38
Drives: 2012 Nismo 370z
Rep Power: 13 |
I hear ya. I was kind of afraid of that. If that's the case, I definitely know where to start looking.
__________________
2012 Nismo Current mods: Stillen G3 Intake, NonStopTuning Underdrive crank pulley |
06-30-2014, 01:29 PM | #42 (permalink) |
Base Member
Join Date: Jan 2013
Location: Houston
Posts: 169
Drives: 2011 370Z
Rep Power: 12 |
Im really thinking the AC and outside temp is playing a big role. I got my car back from the dealership and they said they couldn't find out what's wrong. Next day I was driving home from work and stopped by Walmart. So 15-20mins later I get to my car and it barely managed to start up. I'm starting to think that Baker Nissan in Houston did not clean my TB. Let me know if cleaning yours fixes the issue Pint.
It feels like it has a fuel starvation issue. My car feels slow and sluggish when driving. I'm going to try to get a tune-up and new spark plugs to see if that helps with the issue also.
__________________
2011 Magnetic Black 370Z | K&N | BERK | SWIFT | SPC | AVANT GARDE |
06-30-2014, 01:47 PM | #44 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Austin
Posts: 14,196
Drives: 2016 Mazda 6
Rep Power: 211844 |
That's about a 50/50 chance for me. I've had instances where as soon as it happened once, I would try to restart and give it some gas but it would just rev high and then kill itself. The times it did work, it would rev up, almost die (shuttering and all) and then stabilize.
__________________
Tracie |
06-30-2014, 02:00 PM | #45 (permalink) |
Base Member
Join Date: Jan 2013
Location: Houston
Posts: 169
Drives: 2011 370Z
Rep Power: 12 |
Update: Just spoke to a good friend of mine from Houston Z's. He says it could possibly be a heat soak issue with the intakes. I'm going to get my filters and MAF sensors cleaned and get back to yall by this weekend. I have K&N Typhoons which are short ram so I'm hoping this is the cause of the problem.
__________________
2011 Magnetic Black 370Z | K&N | BERK | SWIFT | SPC | AVANT GARDE |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine dies on Auto. | Xsad | Engine & Drivetrain | 19 | 06-04-2012 04:04 PM |
car dies after turn on | DJVendetta | Engine & Drivetrain | 7 | 10-07-2011 09:08 PM |
Cold starts : engine / exhaust sound | 245kW | Engine & Drivetrain | 17 | 12-14-2010 12:35 AM |
My GSX finally dies........... | whoady4shoady | Nissan 370Z General Discussions | 35 | 07-05-2009 10:48 PM |
When OJ dies... | Maynard | The Lounge (Off Topic) | 3 | 12-07-2008 12:24 AM |