This page may return some day. Please find our website at shop.cj-motorsports.com to view our current 370z fuel system offerings. Thanks!
|
|
LinkBack | Thread Tools | Display Modes |
01-09-2014, 09:25 PM | #1 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,668
Drives: 370
Rep Power: 974723 |
CJM 370z Fuel System Products: A Brief Overview.
This page may return some day.
Please find our website at shop.cj-motorsports.com to view our current 370z fuel system offerings. Thanks!
__________________
Last edited by phunk; 02-12-2015 at 10:33 PM. |
01-09-2014, 09:26 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,668
Drives: 370
Rep Power: 974723 |
FAQ:
What is required for an E85 conversion? A tank of E85 and a full retune. If you are boosted, you will run out of pump and injector MUCH sooner. I would not bother with smaller than 1000cc injectors when boosted, or smaller than 340lph pump.
__________________
Last edited by phunk; 01-09-2014 at 09:42 PM. |
01-09-2014, 10:06 PM | #4 (permalink) |
A True Z Fanatic
Join Date: Oct 2010
Location: Houston, TX
Posts: 3,009
Drives: TT '11 PW Nismo #113
Rep Power: 22 |
^What she said
__________________
2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT || HKS EVC6 || Custom CarPC || F.I 3'' TDX CBE || SB 6puck clutch/ZSpeed CSC || BC BR Coilovers || SPC camber arms || Work VSS-X || Custom Headlights || PW:JDM CF Covers || Seibon CF Engine Cover ] |
01-10-2014, 12:28 PM | #8 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,180
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
01-14-2014, 10:10 PM | #12 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,668
Drives: 370
Rep Power: 974723 |
With 11:1 compression (stock) and properly aggressive tuning (lots of timing, scary for new e85 tuners like I was, had to ease into it), I would say max 600rwhp STD a Dynojet. You MIGHT need the Stage 1FS to get there though... That is how I did it (well 586, I'm sure a half psi more would have taken it to 600 but I felt I pounded on the car enough that day). I have not tried pushing the stock feed line so far but I have heard of several cars on gasoline dropping fuel pressure before making it to the power I have. So I would confidently rate a S1 at 600 max with 340 pump. Stage 0... I just don't have enough feedback to say yet.
The stage 0 system isn't going to offer a whole ton of extra fuel alone. It's basic benefit is that pressure is being regulated after pressure drops in the plumbing. This will result in a few more psi at the rails and getting a little more out of your injectors. I would say that it's going to get 20-30hp past a totally stock system with the same pump and injectors, but I personally haven't pushed the stock system to find its end. Some reports are snowing pressure falling off as low as early 500s on gasoline. The stage 0 can also increase pressure with boost which is nice... But if you're pump limited before injector, this might not get you much further. With a low compression built motor I would tone down the ratings/estimates 25-50 HP. Pump limited before injector in the 340/1000 combo. The 1000s should be good for about 625-650rw in a low comp motor, and close to 675-700 high comp if you have the pump for it. You know what, it's so hard to put ratings on the stuff... People in the Z world often consult with me when they run out of fuel and want to talk about where to improve it. When I take all the results and feedback I have seen from various cars, there is ridiculously low consistency in results, making it so hard to rate a setup, or even a pump or injectors. I should probably start compiling a fuel system performance database so people can see what has been done with different configurations.. Specifically for the VQ which offen seems to outperform other engines in terms of efficiently using the provided quantity of fuel.
__________________
Last edited by phunk; 01-14-2014 at 10:23 PM. |
01-14-2014, 10:16 PM | #13 (permalink) | |
A True Z Fanatic
|
interesting, I'm 10:1, somewhere around 600whp with my gtm stage 2 on pump at the moment (dynoed 575hp/550tq at ~14psi) so I was considering switching to e85 and pushing for 650whp+ at 20-23psi.
Quote:
|
|
01-14-2014, 10:25 PM | #14 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,668
Drives: 370
Rep Power: 974723 |
I don't think you will make it to 650 on e85 with the 340 pump. The injectors can barely do it... But that pump is out of its league at that point. Especially with that high of boost pressure... You will want a return system for that type of boost. I would generally recommend 10+ psi = RFS... But then the pump needs go up.
|
01-14-2014, 10:31 PM | #15 (permalink) | |
A True Z Fanatic
|
Quote:
|
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[FOR SALE] AAM Fuel Return System | Kim@Forged | Parts for sale (Private Classifieds) | 13 | 04-11-2013 02:47 PM |
Converting to return fuel system? (turbo) | overlord | Engine & Drivetrain | 9 | 04-28-2012 03:12 PM |
[FOR SALE] BNIB AAM Comp 370z Fuel Return System | Kim@Forged | Parts for sale (Private Classifieds) | 16 | 04-25-2012 11:19 AM |
370z Fuel System, and Upgrades | phunk | Engine & Drivetrain | 38 | 03-06-2012 07:09 PM |