Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   ***Fast Intentions Oil Cooler Kit: Official Release*** (http://www.the370z.com/engine-drivetrain/84197-fast-intentions-oil-cooler-kit-official-release.html)

Elmo370z 11-03-2015 02:14 PM

Do you need a different oil filter? I'll be installing mine shortly. I have a 2009 non nismo touring worth sport package.

Spooler 11-03-2015 04:01 PM

Quote:

Originally Posted by Elmo370z (Post 3340363)
Do you need a different oil filter? I'll be installing mine shortly. I have a 2009 non nismo touring worth sport package.

Stock filters are not a problem. I have an FI 34 row oil cooler kit also.

AV8rZ 12-18-2015 11:20 AM

Received my oil cooler in the mail about a week ago! Haven't even had time to open the box. If only my #1320 exhaust came as fast.

PongSanity 12-18-2015 12:32 PM

Made to order or in stock and ready to ship?


Sent from my iPhone using Tapatalk

AV8rZ 12-18-2015 01:04 PM

Quote:

Originally Posted by PongSanity (Post 3371101)
Made to order or in stock and ready to ship?


Sent from my iPhone using Tapatalk

Made to order. I believe they were out if the cores when I ordered mine in the beginning of November but were on order. They probably have them ready to ship at this point since have mine.

F.I. Inc. 12-23-2015 01:28 PM

Quote:

Originally Posted by PongSanity (Post 3371101)
Made to order or in stock and ready to ship?


Sent from my iPhone using Tapatalk

We have them back in stock, ready to ship. 3 kits to be exact. If you have any questions or would like to place an order, please feel free to call us.

Happy Holidays!
-Tony

Jlua1992 02-18-2016 01:34 PM

Ive been searching for oil coolers for my 15 Z Nismo and from wat im seeing i think i made my choice to go with fast intentions but will it fit?? Cus every other company keeps saying except for the 15+ Nismo???

AV8rZ 03-02-2016 03:33 PM

Installed mine a couple weeks ago. Very easy to over tighten the fittings that screw into the oil cooler! Can't stress that enough. I did. Learn from my mistake. I crushed the O-ring. Works great. F.I. were very helpful throughout everything.

B&W_Evader 09-10-2017 08:47 PM

Installed
 
3 Attachment(s)
Bought received and installed in under a week. Wanted to do a quick write-up to share my experience. Fit was amazingly good. Perfect length, end bends were clocked so tubes are tucked and aligned perfect. Originally though they were going to be an issue but once attached it all fell into place. Everything is super tight, tighter than I would like but I don't think that would be any different no matter what brand you buy. Make sure you check placement against the sway bar. Lift the front end because the gap changes a lot as the swaybar rotates. I ended up having to shift mine a bit after I saw how the gap changed. Love the crimped ends. Super high quality kit and would recommend it to others.

Elmo370z 12-24-2018 02:54 PM

Anyone know the size of the bolt and torque spec on the thermostatic plate. Mine keeps coming loose after I take off the oil filter

Spooler 12-24-2018 03:41 PM

Quote:

Originally Posted by Elmo370z (Post 3808504)
Anyone know the size of the bolt and torque spec on the thermostatic plate. Mine keeps coming loose after I take off the oil filter

Did you lube the rubber o-ring on the thermostatic plate. I did on my first one and it keep loosening up when I removed the filter. Instructions say not to. On the 2nd car I did not and I don't have any issues.

jchammond 12-24-2018 05:50 PM

Quote:

Originally Posted by Elmo370z (Post 3808504)
Anyone know the size of the bolt and torque spec on the thermostatic plate. Mine keeps coming loose after I take off the oil filter

25ft.lbs. :ugh2:

Elmo370z 12-24-2018 10:42 PM

Quote:

Originally Posted by Spooler (Post 3808510)
Did you lube the rubber o-ring on the thermostatic plate. I did on my first one and it keep loosening up when I removed the filter. Instructions say not to. On the 2nd car I did not and I don't have any issues.

I can’t remember, it was 3 years ago when I was rookie

jchammond 12-25-2018 03:26 AM

Quote:

Originally Posted by Elmo370z (Post 3808591)
I can’t remember, it was 3 years ago when I was rookie

I remember well; as recently done one on Madwi’s Z....as after it was positioned exactly as one in instruction’s....seemed to take a good bit of torque to hit the 25#...but it made it.
Can’t hardly see it coming loose :tup:

Elmo370z 12-25-2018 10:41 AM

Thank you all


All times are GMT -5. The time now is 09:20 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2