NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

I Run L.A. · 05-21-2010, 09:53 PM

that bites.. i was also considering this pulley but since they are on back order and now this.. Im going to have to wait.

Trips · 05-21-2010, 09:56 PM

Quote:

Originally Posted by Jordo!

Is the crank pulley undampened...?

yes

Jordo! · 05-21-2010, 10:15 PM

Quote:

Originally Posted by Triple's

yes

Ehhh. The other pulleys may be worthwhile, but I'd be wary of an undampened crank pulley...

Trips · 05-24-2010, 02:51 PM

Update, I talked to Mike, and he suggested because of the graphite coating may be a little thick to lightly and evenly sand the inside of the pulley, like I did with the alt pulley so it will fit! Nothing major so I'll be doing the Install this weekend.

I want to Thank Mike at NST for his easy and simple explanation and has put me at ease....

efuseakay · 05-24-2010, 05:33 PM

Hopefully they rectify this issue with their coaters, or if it's done in-house.

DIGItonium · 05-25-2010, 10:43 AM

Quote:

Originally Posted by Triple's

Update, I talked to Mike, and he suggested because of the graphite coating may be a little thick to lightly and evenly sand the inside of the pulley, like I did with the alt pulley so it will fit! Nothing major so I'll be doing the Install this weekend.

I want to Thank Mike at NST for his easy and simple explanation and has put me at ease....

My installer had similar issues with just the crank pulley and had to do some minor sanding. It's still well worth the upgrade

Try opening her up in 3rd from 60MPH or so.

Z eliminator · 05-25-2010, 12:12 PM

I have your underdrive pulley on now and im going to a GTM SC. Do you make a stock light weight pulley to replace the OEM. What would the costsbe for that pulley.

Thanks.

NonStopTuning · 05-25-2010, 08:19 PM

Thank you for the continued interest and the positive feedback guys, much appreciated.

As I have stated before... only about 5% of our customers need to sand the bore/keyway on our crank pulley. This is a very small number and nothing to be concerned with. 95% of the time, the pulley slides right into place. Just remember, tighter is better!

We only offer the underdrive kit at the moment. We tried to offer the community a great offer on a lightweight, stock diameter, crank pulley about six months ago... the community did not seem interested. We would be happy to offer such a pulley in the future if the community shows real interest and support.

Many thanks again everyone, good luck and have fun with all your projects!

Trips · 05-30-2010, 12:16 AM

Update!
I'm Happy to announce that after a second attempt, and some light sanding, the Crank Pulley was finally installed by Lou's guys at Amplified. They were able to get it installed along with replacing the belt for the one that was the next size smaller. I did notice a little quicker rev off idle, and on a quick stab at it in gear. I want to Thank Mike for his assurances that all it needed was a little tlc. Thanks Mike!!!

efuseakay · 06-02-2010, 03:52 PM

Quote:

Originally Posted by NonStopTuning

Thank you for the continued interest and the positive feedback guys, much appreciated.

As I have stated before... only about 5% of our customers need to sand the bore/keyway on our crank pulley. This is a very small number and nothing to be concerned with. 95% of the time, the pulley slides right into place. Just remember, tighter is better!

We only offer the underdrive kit at the moment. We tried to offer the community a great offer on a lightweight, stock diameter, crank pulley about six months ago... the community did not seem interested. We would be happy to offer such a pulley in the future if the community shows real interest and support.

Many thanks again everyone, good luck and have fun with all your projects!

Perhaps you guys can make up a jig or something to test each set of pulleys before you ship them out?

I think that'd really help out a lot of customers as far as installation costs...

NonStopTuning · 06-02-2010, 06:42 PM

Quote:

Originally Posted by efuseakay

Perhaps you guys can make up a jig or something to test each set of pulleys before you ship them out?

I think that'd really help out a lot of customers as far as installation costs...

This is a good idea, unfortunately it does not translate to the real world. All of our pulleys are built to the same specs and all go through strict QC before shipping. The problem is not on our end. Believe it or not, not all OEM components are built to the same high tolerances that you might imagine.

So as strange as this may sound... you may have a very tight fit on one 370, and not so tight a fit on another 370. So like I said, in very rare cases a bit of sanding may be necessary. Really nothing to worry about.

Thanks again everyone!

NonStopTuning · 06-02-2010, 06:43 PM

NST 370Z KITS ARE AGAIN IN STOCK AND READY FOR IMMEDIATE DELIVERY!!!

efuseakay · 06-03-2010, 12:46 AM

Quote:

Originally Posted by NonStopTuning

This is a good idea, unfortunately it does not translate to the real world. All of our pulleys are built to the same specs and all go through strict QC before shipping. The problem is not on our end. Believe it or not, not all OEM components are built to the same high tolerances that you might imagine.

So as strange as this may sound... you may have a very tight fit on one 370, and not so tight a fit on another 370. So like I said, in very rare cases a bit of sanding may be necessary. Really nothing to worry about.

Thanks again everyone!

Understood! Just thought I'd throw that idea out there anyway! Thanks for the input! It's much appreciated!

kgreen · 06-03-2010, 01:01 PM

Pm me a price please. 79938

flashburn · 06-03-2010, 01:08 PM

Quote:

Originally Posted by kgreen

Pm me a price please. 79938

Just go to the link in the first post and you can get a shipped quote for yourself.

05-21-2010, 09:53 PM	#226 (permalink)
I Run L.A. Enthusiast Member Join Date: Mar 2009 Location: So Cal / SF Valley Posts: 329 Drives: 09 370Z Mag Blk Rep Power: 16	that bites.. i was also considering this pulley but since they are on back order and now this.. Im going to have to wait. __________________ 09 370Z Mag Blk, 6MT,Tour, Sprt Pkg, Nav

05-24-2010, 02:51 PM	#229 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Update, I talked to Mike, and he suggested because of the graphite coating may be a little thick to lightly and evenly sand the inside of the pulley, like I did with the alt pulley so it will fit! Nothing major so I'll be doing the Install this weekend. I want to Thank Mike at NST for his easy and simple explanation and has put me at ease.... __________________

05-25-2010, 12:12 PM	#232 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	I have your underdrive pulley on now and im going to a GTM SC. Do you make a stock light weight pulley to replace the OEM. What would the costsbe for that pulley. Thanks. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

05-25-2010, 08:19 PM	#233 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Thank you for the continued interest and the positive feedback guys, much appreciated. As I have stated before... only about 5% of our customers need to sand the bore/keyway on our crank pulley. This is a very small number and nothing to be concerned with. 95% of the time, the pulley slides right into place. Just remember, tighter is better! We only offer the underdrive kit at the moment. We tried to offer the community a great offer on a lightweight, stock diameter, crank pulley about six months ago... the community did not seem interested. We would be happy to offer such a pulley in the future if the community shows real interest and support. Many thanks again everyone, good luck and have fun with all your projects! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

05-30-2010, 12:16 AM	#234 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Update! I'm Happy to announce that after a second attempt, and some light sanding, the Crank Pulley was finally installed by Lou's guys at Amplified. They were able to get it installed along with replacing the belt for the one that was the next size smaller. I did notice a little quicker rev off idle, and on a quick stab at it in gear. I want to Thank Mike for his assurances that all it needed was a little tlc. Thanks Mike!!! __________________

05-24-2010, 05:33 PM	#230 (permalink)
efuseakay Enthusiast Member Join Date: Mar 2010 Location: The DAYNGA ZONE! Posts: 404 Drives: 2010 G37xS Sedan Rep Power: 15	Hopefully they rectify this issue with their coaters, or if it's done in-house.

06-02-2010, 06:43 PM	#237 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	NST 370Z KITS ARE AGAIN IN STOCK AND READY FOR IMMEDIATE DELIVERY!!! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

06-03-2010, 01:01 PM	#239 (permalink)
kgreen Enthusiast Member Join Date: Feb 2009 Location: EL Paso, Tx Posts: 387 Drives: SR 370z Rep Power: 243	Pm me a price please. 79938

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 03:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 02:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 01:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 01:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 10:50 AM