NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

NonStopTuning · 02-24-2010, 04:40 PM

Hope you got your pulleys on and are enjoying them!

NonStopTuning · 03-09-2010, 01:44 AM

This thread definitely needs more pics

Z eliminator · 03-10-2010, 08:40 AM

Got the car back last night after the headers and pulleys were installed. What a difference It goes like a bat out of hell. It gets to 80 km much quicker from a standing start. Its scary fast when you put all the mods together. My mechanic who installed the parts could not believe how fast it excelerates. now. 4.08 gears plus Stillen G3 intake, CBE, cats, headers, with the underdrive pulley and overdrive pulley on the altenator with a cobb tune. Car will be dynoed next week. The voltage did not move on the gauge 14.3 to 14.4.
12.6's here we come !!!

DIGItonium · 03-10-2010, 09:27 AM

Can you guys recommend online sites to order the Gates belt? I haven't checked with my local AutoZone yet.

Mike, I'm going to order the pulleys in a few weeks and have my dealer install it. Do you guys still carry the gray color?

NonStopTuning · 03-10-2010, 01:25 PM

Quote:

Originally Posted by DIGItonium

Can you guys recommend online sites to order the Gates belt? I haven't checked with my local AutoZone yet.

Mike, I'm going to order the pulleys in a few weeks and have my dealer install it. Do you guys still carry the gray color?

You should be able to locate the belt at your locat AutoZone, Oreilly, PepBoys, etc.

And yes, we will always have the gray and red kits available

NonStopTuning · 03-10-2010, 01:26 PM

Quote:

Originally Posted by Z eliminator

Got the car back last night after the headers and pulleys were installed. What a difference It goes like a bat out of hell. It gets to 80 km much quicker from a standing start. Its scary fast when you put all the mods together. My mechanic who installed the parts could not believe how fast it excelerates. now. 4.08 gears plus Stillen G3 intake, CBE, cats, headers, with the underdrive pulley and overdrive pulley on the altenator with a cobb tune. Car will be dynoed next week. The voltage did not move on the gauge 14.3 to 14.4.
12.6's here we come !!!

Glad to hear your review. Good luck at the track!

NYBladeZ · 03-13-2010, 03:45 PM

In for dyno results on a 370z, seems like a cool mod and I can always sell them if and when I go F.I. $200 is a great price as well.

DIGItonium · 03-14-2010, 12:07 PM

Quote:

Originally Posted by NonStopTuning

You should be able to locate the belt at your locat AutoZone, Oreilly, PepBoys, etc.

And yes, we will always have the gray and red kits available

Sweet... AZ didn't have it, and OReilly ordered one and should come in Tuesday. I can't wait to get these pulleys!!!

Brazilbro · 03-15-2010, 12:46 AM

Quote:

Originally Posted by Z eliminator

Got the car back last night after the headers and pulleys were installed. What a difference It goes like a bat out of hell. It gets to 80 km much quicker from a standing start. Its scary fast when you put all the mods together. My mechanic who installed the parts could not believe how fast it excelerates. now. 4.08 gears plus Stillen G3 intake, CBE, cats, headers, with the underdrive pulley and overdrive pulley on the altenator with a cobb tune. Car will be dynoed next week. The voltage did not move on the gauge 14.3 to 14.4.
12.6's here we come !!!

what are you going to do when you put the S/C on.. do these pulleys work with the GTM S/C?

thegraylady · 03-16-2010, 09:11 AM

so belts and pulleys what else do i need and how much of a hp tq gain we talking here

NonStopTuning · 03-16-2010, 09:40 PM

Quote:

Originally Posted by Brazilbro

what are you going to do when you put the S/C on.. do these pulleys work with the GTM S/C?

IF/WHEN you ever go with a supercharger that is driven off the crank pulley, you can remove the underdrive crank pulley and contact NST for a lightweight OEM diameter crank pulley, or install the OEM Nissan pulley.

NonStopTuning · 03-16-2010, 09:42 PM

Quote:

Originally Posted by thegraylady

so belts and pulleys what else do i need and how much of a hp tq gain we talking here

You don't need anything else, no other modification of any sort is necessary. And as far as HP, TQ, and throttle response goes... please check page one of this thread. This is a VERY noticeable performance booster.

ZKindaGuy · 03-16-2010, 11:44 PM

Quote:

Originally Posted by NonStopTuning

The more HP and TQ an engine makes, the more lightweight underdrive pulleys can free up.

Just for reference, the dyno chart from our latest R&D project, the BMW 335i...

Roughly 20whp and 20wtq at 6,000 RPM: NST - NonStopTuning Blog

That is the worst looking dyno graph I have ever seen in the 13 years I have been involved in getting my cars dynoed. Is that erratic power and torque as well as curve typical behavior for of a BMW engine???

JB-370z · 03-17-2010, 06:13 PM

Do you think these will pair well with a turbo system???

NonStopTuning · 03-17-2010, 08:47 PM

Quote:

Originally Posted by ZKindaGuy

That is the worst looking dyno graph I have ever seen in the 13 years I have been involved in getting my cars dynoed. Is that erratic power and torque as well as curve typical behavior for of a BMW engine???

Not entirely sure. This was the first 335i we have put on a dyno, and it was not running the OEM BMW map. But one thing is clear, the NST pulley made a noticeable difference across the RPM band.

We'll be testing with a bone stock 335i in the next couple weeks and will compare the behavior.

02-24-2010, 04:40 PM	#181 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Hope you got your pulleys on and are enjoying them! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

03-09-2010, 01:44 AM	#182 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	This thread definitely needs more pics __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

03-10-2010, 08:40 AM	#183 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Got the car back last night after the headers and pulleys were installed. What a difference It goes like a bat out of hell. It gets to 80 km much quicker from a standing start. Its scary fast when you put all the mods together. My mechanic who installed the parts could not believe how fast it excelerates. now. 4.08 gears plus Stillen G3 intake, CBE, cats, headers, with the underdrive pulley and overdrive pulley on the altenator with a cobb tune. Car will be dynoed next week. The voltage did not move on the gauge 14.3 to 14.4. 12.6's here we come !!! __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

03-10-2010, 09:27 AM	#184 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Can you guys recommend online sites to order the Gates belt? I haven't checked with my local AutoZone yet. Mike, I'm going to order the pulleys in a few weeks and have my dealer install it. Do you guys still carry the gray color? __________________

03-13-2010, 03:45 PM	#187 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	In for dyno results on a 370z, seems like a cool mod and I can always sell them if and when I go F.I. $200 is a great price as well. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

03-16-2010, 09:11 AM	#190 (permalink)
thegraylady Base Member Join Date: Jan 2010 Location: new york Posts: 63 Drives: 09 370z gray7 speed Rep Power: 15	so belts and pulleys what else do i need and how much of a hp tq gain we talking here

03-17-2010, 06:13 PM	#194 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Do you think these will pair well with a turbo system??? __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 03:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 02:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 01:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 01:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 10:50 AM