NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

NonStopTuning · 04-09-2014, 01:52 AM

Another update in the next few business days.

MIKE @ NST

2011_6Spd · 04-09-2014, 08:30 PM

IF I was part of this group buy I would have given the vendor maybe an extra 2-3 weeks to deliver the merchandise already paid for. It sounds like they have other priorities, have already been paid, and will get around to your orders when its convenient.

I'd recommend visiting this site to see what options are available to you:
Billed for Merchandise You Never Received? Here's What To Do | Consumer Information

Niche79 · 04-09-2014, 11:32 PM

Quote:

Originally Posted by 2011_6Spd

IF I was part of this group buy I would have given the vendor maybe an extra 2-3 weeks to deliver the merchandise already paid for. It sounds like they have other priorities, have already been paid, and will get around to your orders when its convenient.

I'd recommend visiting this site to see what options are available to you:
Billed for Merchandise You Never Received? Here's What To Do | Consumer Information

Id ask for a refund before I went to an outside site. Im giving them the "extra" time they need till May, then I will pursue other avenues.

NonStopTuning · 04-10-2014, 02:03 AM

There's no reason for anyone to go into panic mode. We want your business and value the370Z.com community's support very much.

Building these kits and doing it the right way takes some time. Rest assured, these are the best kits your hard earned money can buy. The hundreds of customers who have posted their reviews in 80+ pages in this very thread can attest to the fact that NST pulleys are worth every penny, and worth the wait. You don't have to take my word for it, just flip through the 80+ pages here.

As I posted yesterday, I expect to have an update of our timeline for you guys within the next few business days.

As I have said so many times, we certainly appreciate and value your patience and support.

MIKE @ NST

SuperDave · 04-11-2014, 12:57 PM

Quote:

Originally Posted by NonStopTuning

We hope to have product ready for quality control (QC) testing sometime towards the end of next week. If all goes well with QC, product will be ready for shipping seven to ten days after.

This actual update was on 4/1.

Quote:

Originally Posted by NonStopTuning

Another update in the next few business days.

Quote:

Originally Posted by NonStopTuning

As I posted yesterday, I expect to have an update of our timeline for you guys within the next few business days.

Today is 4/11. We have asked for weekly updates. Where is this week's update? I'm ready to ask for a refund, unless this week's update is that they're shipping next week.

NickD · 04-14-2014, 08:04 AM

^^^ This.

To add...it's great that you post about the positive feedback on previous group buys because people like the product but you can't ignore or explain away the negative feedback regarding timelines and lack of updates.

We were told we were getting a production update by the end of last week and still nothing.

Can you please provide an update???

Chuck33079 · 04-14-2014, 08:08 AM

Too busy for an update here but no problems getting another group buy started for their shifter?

NonStopTuning · 04-14-2014, 10:30 PM

First round of QC looked good today. Should be finalized within the next few days. If all is well, we proceed with anodizing and final QC.

Many thanks for the patience and support, ladies and gents.

MIKE @ NST

SuperDave · 04-14-2014, 10:53 PM

So a few more days to finish the first round of qc, and then anodizing, and then another qc??? Or a few more days for the anodizing and final qc to be completed?

Sent from my HTC VLE_U using Tapatalk

Roddy1 · 04-15-2014, 01:18 PM

Quote:

Originally Posted by NonStopTuning

First round of QC looked good today. Should be finalized within the next few days. If all is well, we proceed with anodizing and final QC.

Many thanks for the patience and support, ladies and gents.

MIKE @ NST

What aspects of QC? Is this 3rd party QC? if so who is the auditor and what is the accreditation behind their QC process.

NickD · 04-15-2014, 01:38 PM

Quote:

Originally Posted by Roddy1

What aspects of QC? Is this 3rd party QC? if so who is the auditor and what is the accreditation behind their QC process.

1slow370 · 04-15-2014, 02:08 PM

Quote:

Originally Posted by NonStopTuning

First round of QC looked good today. Should be finalized within the next few days. If all is well, we proceed with anodizing and final QC.

Many thanks for the patience and support, ladies and gents.

MIKE @ NST

Patience and support? hahaha our vendors need to learn this is the 370 forum you tell us a week and take two and we'll kick your dog and call you a fucker lol /sarcasm

Huck · 04-15-2014, 02:16 PM

Quote:

Originally Posted by Roddy1

What aspects of QC? Is this 3rd party QC? if so who is the auditor and what is the accreditation behind their QC process.

Ummm... You could honestly live the rest of your life very happily and comfortably without knowing the answer to these questions. There's a point when you need to stop trying to get up in every aspect of their business, and this is it.

Zdayz 2014!!

gbrettin · 04-15-2014, 04:11 PM

Quote:

Originally Posted by NonStopTuning

First round of QC looked good today. Should be finalized within the next few days. If all is well, we proceed with anodizing and final QC.

Many thanks for the patience and support, ladies and gents.

MIKE @ NST

Sounds like we are almost there! Thanks for the update Mike.

Personally, I'm really anxious about getting the NST pulley combo because I'd like to have them on before Zdayz.

NickD · 04-15-2014, 06:12 PM

Quote:

Originally Posted by Roddy1

What aspects of QC? Is this 3rd party QC? if so who is the auditor and what is the accreditation behind their QC process.

I literally got dizzy and bled from the ears reading this. I hope you were drunk when you wrote it so there's a reasonable explanation.

04-09-2014, 01:52 AM	#1291 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Another update in the next few business days. MIKE @ NST gbrettin and johnson14785 like this. __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

04-09-2014, 08:30 PM	#1292 (permalink)
2011_6Spd Base Member Join Date: May 2011 Location: Orlando, FL Age: 44 Posts: 124 Drives: 2011 370z 6spd sport Rep Power: 14	IF I was part of this group buy I would have given the vendor maybe an extra 2-3 weeks to deliver the merchandise already paid for. It sounds like they have other priorities, have already been paid, and will get around to your orders when its convenient. I'd recommend visiting this site to see what options are available to you: Billed for Merchandise You Never Received? Here's What To Do \| Consumer Information __________________ 2011 Brilliant Silver 6spd w/sport pkg 2008 Silver CBR600RR

04-10-2014, 02:03 AM	#1294 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	There's no reason for anyone to go into panic mode. We want your business and value the370Z.com community's support very much. Building these kits and doing it the right way takes some time. Rest assured, these are the best kits your hard earned money can buy. The hundreds of customers who have posted their reviews in 80+ pages in this very thread can attest to the fact that NST pulleys are worth every penny, and worth the wait. You don't have to take my word for it, just flip through the 80+ pages here. As I posted yesterday, I expect to have an update of our timeline for you guys within the next few business days. As I have said so many times, we certainly appreciate and value your patience and support. MIKE @ NST __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog! Last edited by NonStopTuning; 04-10-2014 at 02:05 AM.

04-14-2014, 08:04 AM	#1296 (permalink)
NickD A True Z Fanatic Join Date: Mar 2012 Location: Babylon, NY Posts: 1,321 Drives: 10 Z34 Touring Vert Rep Power: 15	^^^ This. To add...it's great that you post about the positive feedback on previous group buys because people like the product but you can't ignore or explain away the negative feedback regarding timelines and lack of updates. We were told we were getting a production update by the end of last week and still nothing. Can you please provide an update??? __________________ 2010 370z Touring Roadster Monterey Blue My Z Photo Library

04-14-2014, 08:08 AM	#1297 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Too busy for an update here but no problems getting another group buy started for their shifter? Niche79 and NickD like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

04-14-2014, 10:30 PM	#1298 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	First round of QC looked good today. Should be finalized within the next few days. If all is well, we proceed with anodizing and final QC. Many thanks for the patience and support, ladies and gents. MIKE @ NST gbrettin likes this. __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

04-14-2014, 10:53 PM	#1299 (permalink)
SuperDave Track Member Join Date: May 2013 Location: Manteca, Nor-Cal Posts: 691 Drives: My Z Daily Rep Power: 13	So a few more days to finish the first round of qc, and then anodizing, and then another qc??? Or a few more days for the anodizing and final qc to be completed? Sent from my HTC VLE_U using Tapatalk __________________ R2 ZEE 2 Build Journal Upgrade your speakers from BOSE without new wiring, LOC's, or a new head unit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 03:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 02:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 01:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 01:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 10:50 AM