NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

NonStopTuning · 10-27-2009, 11:59 PM

Quote:

Originally Posted by tcarretti

Sad update on my part...

Initially, I was enjoying the changes from adding the UD pulley. I had put on about 500 miles or so and started noticing a couple of drops of oil under the car when I moved it. Also started noticing a slight vibration so I called the mechanic that installed it and he came over to check it out. Turns out it wasn't seated properly and was wobbling. I should have known better and taken it to a shop to have done. I told him to just put the stocker back on. I asked if it was still leaking, thinking it was coming from the front crank seal.

Anyway, he puts the stock pulley back on and says it's all good for now. I get the splash panel washed out and spray down the front of the engine to remove any residual oil... That night I'm STILL smelling oil so I crossed my fingers and took it to the dealer. Sure enough, the front crank seal is bad now. They replaced it under warranty and I'm just hoping that no other damage was done by the bad install.

Just a reminder that when you have bits installed, make sure that you know everything is done correctly. I feel like an idiot now, and it's going to take a little while before I trust my car again to be free from defects. I hate this feeling...

This in no way should reflect on NST. Their service and product were great, I just got unlucky with a bad install. Now I have an expensive paperweight as the inner sleeve has a nice uneven groove in it from where it was spinning incorrectly.

I'm sorry to hear about your installation issue there

And I appreciate the kind words regarding our product and service.
Feel free to contact me by phone and I will see what I can do for you regarding your NST Pulley Kit.

Professional installation, from someone who has experience with installing pulleys, is highly recommended.

Thanks again, best of luck to you and your car with all your future projects.

NeverBoneStck · 11-01-2009, 07:27 PM

I installed on my g37 S and you can tell a difference .. Thanx !!

NonStopTuning · 11-10-2009, 04:22 PM

Quote:

Originally Posted by NeverBoneStck

I installed on my g37 S and you can tell a difference .. Thanx !!

Glad to hear it

theDreamer · 11-10-2009, 04:37 PM

I was on the UH campus today and had to do a double take when walking past someone, they had on a NST shirt from your shop.

NonStopTuning · 11-10-2009, 09:45 PM

Quote:

Originally Posted by theDreamer

I was on the UH campus today and had to do a double take when walking past someone, they had on a NST shirt from your shop.

That's very cool

We have a lot of local customers in the Houston area who come to our meets and events.
A lot of these people support us by picking up a Tshirt or two!

Thanks for posting that!!!

NonStopTuning · 12-08-2009, 06:54 PM

Any new user reviews, thoughts, or comments from recent NST Pulley owners would be much appreciated.

Many thanks for all the help and support everyone!!!

NonStopTuning · 12-12-2009, 05:24 PM

Quote:

Originally Posted by racerxj17

nothing with OEM sizes for us that plan to S/C?

We can build such pulleys for any customer on a special-order basis, in fact we do this quite often.

NonStopTuning · 01-06-2010, 01:18 AM

Any new user reviews, thoughts, or comments from recent NST Pulley owners would be much appreciated.

Many thanks for all the help and support everyone!!!

NonStopTuning · 01-21-2010, 07:08 PM

Thank you for the recent inquiries, phone calls, and IMs everyone. Your support of our brand and products is much appreciated.

phelan · 01-22-2010, 07:25 PM

I put a mini-blurb in my journal:

Quote:

Originally Posted by phelan

NonStopTuning Pulley Kit - (installed w/ new Gates belt)
Like others said, it's noticeably lighter than the stock pulley. The car feels remarkably different in acceleration. There's a nice flat road behind AE Ryne told me about that goes nowhere (and I made absolutely sure it was clear), and I opened up the taps...whoomph. I think my brain got smashed in the back of my head.

Also to note: my MPGs went up too, but I did install a few things at the same time. No complaints from me so far though, good work NST.

NonStopTuning · 01-29-2010, 12:51 AM

Quote:

Originally Posted by phelan

I put a mini-blurb in my journal:

Also to note: my MPGs went up too, but I did install a few things at the same time. No complaints from me so far though, good work NST.

I'm glad to hear that you're enjoying your new toys!

Zello370 · 02-02-2010, 09:45 AM

Mike just got my pullies, but everyone here, says i should have gotten stillen or wonn't put them on. can i bring my car to you and have you guys hook me up?

NonStopTuning · 02-03-2010, 12:28 AM

Quote:

Originally Posted by Zello370

Mike just got my pullies, but everyone here, says i should have gotten stillen or wonn't put them on. can i bring my car to you and have you guys hook me up?

Well if you read the reviews from the people here who actually own and use NST pulleys... these people have nothing but positive reviews for our products.

Please give us a call during normal business hours and we would be happy to set up an appointment for your installation at our shop.

Thanks again, good luck and have fun with all your projects!

NonStopTuning · 02-11-2010, 10:47 PM

Anyone else?!

Z eliminator · 02-13-2010, 05:13 PM

My pulleys are being installed next week with my headers. Will post dyno after install.

11-10-2009, 04:37 PM	#169 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	I was on the UH campus today and had to do a double take when walking past someone, they had on a NST shirt from your shop. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

12-08-2009, 06:54 PM	#171 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Any new user reviews, thoughts, or comments from recent NST Pulley owners would be much appreciated. Many thanks for all the help and support everyone!!! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog! Last edited by NonStopTuning; 01-06-2010 at 01:16 AM.

01-06-2010, 01:18 AM	#173 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Any new user reviews, thoughts, or comments from recent NST Pulley owners would be much appreciated. Many thanks for all the help and support everyone!!! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

01-21-2010, 07:08 PM	#174 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Thank you for the recent inquiries, phone calls, and IMs everyone. Your support of our brand and products is much appreciated. __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

02-02-2010, 09:45 AM	#177 (permalink)
Zello370 Base Member Join Date: Jan 2009 Location: Harker Hts, Texas Posts: 26 Drives: Yellow 370 Rep Power: 16	Problem Mike just got my pullies, but everyone here, says i should have gotten stillen or wonn't put them on. can i bring my car to you and have you guys hook me up? __________________

11-01-2009, 07:27 PM	#167 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	I installed on my g37 S and you can tell a difference .. Thanx !!

02-11-2010, 10:47 PM	#179 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Anyone else?! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

02-13-2010, 05:13 PM	#180 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	My pulleys are being installed next week with my headers. Will post dyno after install. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 03:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 02:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 01:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 01:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 10:50 AM