NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

NonStopTuning · 04-17-2011, 03:12 PM

Quote:

Originally Posted by wstar

I put Stillen's underdrive pulley on my car ages ago (been on for 14K miles now btw, no issues at all with it, just FYI for those scared of pulleys). I'd rather stick with the Stillen one since it's already on the car, but I might try out your 10% overdriven alternator pulley just to bring my alternator back up to speed a bit (since I'm running that tiny PC680 battery as well).

Anyone have a clue about how belt fitment would work out on that combo? I'm guessing the tensioner can make up the difference using the belt length Stillen specified, doesn't look like a huge change on that little alternator pulley.

Using our alternator pulley would be a good idea with your setup. And yes, you can keep the same belt that you are using now. A shorter belt would not be necessary with your setup.

G37sHKS · 04-17-2011, 03:23 PM

Quote:

Originally Posted by NonStopTuning

Any new user reviews, thoughts, or comments from recent customers would be more than welcome here.

Good luck everyone!

Sure,

I bought the both pulleys and belt as well,

Installing them was rough but everything went smooth later, I definitely noticed that i gained power and torque once i took the car for a spin, great mod believe me..dont waste your money on light weight pulley that have stock size.. it wont do anything.. you "NEED" smaller size to let the magic of light weight pulley works..

I'm very happy with the purchase and i would buy it again with no doubt.

NonStopTuning · 04-28-2011, 05:38 AM

Quote:

Originally Posted by G37sHKS

Sure,

I bought the both pulleys and belt as well,

Installing them was rough but everything went smooth later, I definitely noticed that i gained power and torque once i took the car for a spin, great mod believe me..dont waste your money on light weight pulley that have stock size.. it wont do anything.. you "NEED" smaller size to let the magic of light weight pulley works..

I'm very happy with the purchase and i would buy it again with no doubt.

Glad to hear it! Welcome to the NST pulley club

NonStopTuning · 05-02-2011, 06:15 PM

The XDC Girls Say: "NST Pulleys Rock Our Socks!"

wstar · 05-02-2011, 11:02 PM

Quote:

Originally Posted by NonStopTuning

Using our alternator pulley would be a good idea with your setup. And yes, you can keep the same belt that you are using now. A shorter belt would not be necessary with your setup.

Just an update on this in case anyone else was considering this idea (adding NST's alternator pulley to an existing Stillen crank pulley): it works out fine with the belt Stillen recommends for their crank pulley (Gates K070776). The tension indicator on the tensioner shows up on the middle mark, which is just barely in range for a new belt according to the service manual (and then you still have some allowance for the belt to wear out over time).

NonStopTuning · 05-11-2011, 04:03 AM

Quote:

Originally Posted by wstar

Just an update on this in case anyone else was considering this idea (adding NST's alternator pulley to an existing Stillen crank pulley): it works out fine with the belt Stillen recommends for their crank pulley (Gates K070776). The tension indicator on the tensioner shows up on the middle mark, which is just barely in range for a new belt according to the service manual (and then you still have some allowance for the belt to wear out over time).

Good to go!

NonStopTuning · 05-17-2011, 10:08 AM

Anyone else have any feedback to share?

wstar · 05-17-2011, 01:02 PM

Quote:

Originally Posted by NonStopTuning

Anyone else have any feedback to share?

Yes, your advertising girls are

NonStopTuning · 05-25-2011, 11:03 PM

Thank you!

Zedx · 05-26-2011, 05:36 AM

on site. ready to order. but question. does the belt come with the Kit NST13710KIT

NonStopTuning · 05-26-2011, 03:17 PM

Quote:

Originally Posted by Zedx

on site. ready to order. but question. does the belt come with the Kit NST13710KIT

Belts are listed and sold separately. The kit does not include a belt.

Thanks again!

NonStopTuning · 06-07-2011, 08:23 PM

Thank you for the recent inquiries and the feedback ladies and gents. Much appreciated!

NonStopTuning · 06-21-2011, 06:20 PM

Getting a bit low on quantities now. Thanks for the help and support of our brand and products everyone. Much appreciated!

Please continue with the feedback in this thread.

XwChriswX · 06-21-2011, 06:23 PM

NST - How long is the average/estimated install time required so I know if a shop is BSing me?

NonStopTuning · 06-21-2011, 06:32 PM

Quote:

Originally Posted by XwChriswX

NST - How long is the average/estimated install time required so I know if a shop is BSing me?

Chris, most pro shops should be able to tackle this project in 1.5 to 2hrs.

05-02-2011, 06:15 PM	#364 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	The XDC Girls Say: "NST Pulleys Rock Our Socks!" __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

05-17-2011, 10:08 AM	#367 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Anyone else have any feedback to share? __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

05-25-2011, 11:03 PM	#369 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Thank you! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

06-07-2011, 08:23 PM	#372 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Thank you for the recent inquiries and the feedback ladies and gents. Much appreciated! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

06-21-2011, 06:20 PM	#373 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Getting a bit low on quantities now. Thanks for the help and support of our brand and products everyone. Much appreciated! Please continue with the feedback in this thread. __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

05-26-2011, 05:36 AM	#370 (permalink)
Zedx Base Member Join Date: Mar 2011 Location: Florida Posts: 113 Drives: 370Z GT. Platinum Gr Rep Power: 14	on site. ready to order. but question. does the belt come with the Kit NST13710KIT

06-21-2011, 06:23 PM	#374 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	NST - How long is the average/estimated install time required so I know if a shop is BSing me? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 03:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 02:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 01:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 01:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 10:50 AM