who can bore out a tb?

370Z JT · 01-16-2014, 04:37 PM

Have you bored tbs before?

DEpointfive0 · 01-16-2014, 04:43 PM

Quote:

Originally Posted by AzSpeng

im down to do all these throttle bodies. just waiting on someone COUGH ANDREW COUGH to send me one

Set is on it's way

edub370 · 01-16-2014, 05:49 PM

now we're talking! u have a dyno with your current setup so we could see the results?

AzSpeng · 01-16-2014, 05:59 PM

Quote:

Originally Posted by 370Z JT

Have you bored tbs before?

I am a skilled machinist. boring a tb is a walk in the park.

synolimit · 01-16-2014, 06:20 PM

Quote:

Originally Posted by AzSpeng

I am a skilled machinist. boring a tb is a walk in the park.

What are you think size size wise? What about new butterfly's so the port isn't a waste?

1slow370 · 01-16-2014, 10:17 PM

butterflys are easy the hard part is going to be the new axle required for the larger butterfly. the butterfly slot is a bitch to cut i'm sure he has the equipment tho. One hint tho the butterfly blade is harder than you first think but easy once you figure it out.

Edit: Never underestimate a good machinist especially if they have past production and job shop experience we can do anything given enough time and the right price.

AzSpeng · 01-16-2014, 10:24 PM

Have you by chance seen my facebook?

www.facebook.com/arizonaspeng

1slow370 · 01-16-2014, 10:35 PM

yep. Clean shop. the slots a bitch cus it's square ended goes through a 3/8ish axle has to be dead nuts true, parallel and centered on that axle oh and they are usually just a hair over .062 wide. They stock shafts are usually pretty worn so it is best not to modify/reuse them. I've seen your equipment so i know you have the stuff to do it and i'm sure you'll be fine. There are a couple other surprises in the vhr throttles but I can't give the whole game away. Also the factory manifold can't be opened up much so there are only minimal gains anyway.

synolimit · 01-16-2014, 10:38 PM

Quote:

Originally Posted by 1slow370

butterflys are easy the hard part is going to be the new axle required for the larger butterfly. the butterfly slot is a bitch to cut i'm sure he has the equipment tho. One hint tho the butterfly blade is harder than you first think but easy once you figure it out.

Edit: Never underestimate a good machinist especially if they have past production and job shop experience we can do anything given enough time and the right price.

You wouldn't need a new axle. You just need a large diameter plate. Take the plate off, pull out the axle, do your business, reinstall axle with larger plate, done.

AzSpeng · 01-16-2014, 10:41 PM

I have a waterjet on the way and edm work is just a rock toss down the road. ill know more once i have one in my hands.

1slow370 · 01-16-2014, 10:42 PM

larger diameter plate = wider slot in the axle

SlowZ · 01-17-2014, 03:49 PM

How would the gains look with Stillen g3's, an m370 or Z1's intake manifold, along with the ported tb's

Dirtkawracer · 01-22-2014, 12:28 AM

Interested to see where this goes

synolimit · 01-22-2014, 01:15 AM

Who wants to start a round Robbin buy program kind of thing?

It'd work by me for example buying off eBay or somewhere the cheapest throttle bodies and manifold I can find. I'll send it to get ported. Then I'll take my OEM stuff off and install the new ported parts. Then you buy off me what I paid for the TB's and mani. You then send mine in to be ported and it just keeps going. Many of us use these cars for DD so no one will have a down car and you'll get your money right back from the next guy.

Anyone?

Or if someone knows someone that bought a motordyne that'd like to donate a mani that'd be great.

DEpointfive0 · 01-22-2014, 01:31 AM

^I sent TBs.
I can send a 370Z manifold too

01-16-2014, 04:37 PM	#46 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Have you bored tbs before? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

01-16-2014, 05:49 PM	#48 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	now we're talking! u have a dyno with your current setup so we could see the results? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

01-16-2014, 10:17 PM	#51 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	butterflys are easy the hard part is going to be the new axle required for the larger butterfly. the butterfly slot is a bitch to cut i'm sure he has the equipment tho. One hint tho the butterfly blade is harder than you first think but easy once you figure it out. Edit: Never underestimate a good machinist especially if they have past production and job shop experience we can do anything given enough time and the right price. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 01-16-2014 at 10:25 PM.

01-16-2014, 10:35 PM	#53 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	yep. Clean shop. the slots a bitch cus it's square ended goes through a 3/8ish axle has to be dead nuts true, parallel and centered on that axle oh and they are usually just a hair over .062 wide. They stock shafts are usually pretty worn so it is best not to modify/reuse them. I've seen your equipment so i know you have the stuff to do it and i'm sure you'll be fine. There are a couple other surprises in the vhr throttles but I can't give the whole game away. Also the factory manifold can't be opened up much so there are only minimal gains anyway. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-16-2014, 10:42 PM	#56 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	larger diameter plate = wider slot in the axle __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-16-2014, 10:24 PM	#52 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	Have you by chance seen my facebook? www.facebook.com/arizonaspeng

01-16-2014, 10:41 PM	#55 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	I have a waterjet on the way and edm work is just a rock toss down the road. ill know more once i have one in my hands.

01-17-2014, 03:49 PM	#57 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	How would the gains look with Stillen g3's, an m370 or Z1's intake manifold, along with the ported tb's

01-22-2014, 12:28 AM	#58 (permalink)
Dirtkawracer Base Member Join Date: Aug 2013 Location: NJ Posts: 38 Drives: 370z mt Rep Power: 12	Interested to see where this goes

01-22-2014, 01:15 AM	#59 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Who wants to start a round Robbin buy program kind of thing? It'd work by me for example buying off eBay or somewhere the cheapest throttle bodies and manifold I can find. I'll send it to get ported. Then I'll take my OEM stuff off and install the new ported parts. Then you buy off me what I paid for the TB's and mani. You then send mine in to be ported and it just keeps going. Many of us use these cars for DD so no one will have a down car and you'll get your money right back from the next guy. Anyone? Or if someone knows someone that bought a motordyne that'd like to donate a mani that'd be great. __________________ 13 370z- Last edited by synolimit; 01-22-2014 at 01:24 AM.

01-22-2014, 01:31 AM	#60 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	^I sent TBs. I can send a 370Z manifold too __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 15mm H&R DRM TRAK+ Spacer pair, 66.1 hub bore.	VQA33	Parts for sale (Private Classifieds)	6	09-12-2013 08:22 AM