who can bore out a tb?

edub370 · 12-17-2013, 05:35 PM

can any compitent machine shop bore out a tbh, flat edge the pivot piece, and re-size the plates accordingly? i've seen jun and mine's offer it, but im not willing to pay either of those companies anything near what they charge for this. anyone in this country that does it at a decent price?

AzSpeng · 12-17-2013, 06:08 PM

I can do this for you.

edub370 · 12-18-2013, 08:46 AM

man you should start doing this for the forum. we are lacking real intake in depth intake mods!

AzSpeng · 12-18-2013, 09:43 AM

Consider it done. Show me what all needs to be done and lets formulate a plan of attack so I can get pricing up on the site and get a process in place.

Vnismo370z · 12-18-2013, 10:03 AM

Sub'd interested as well, also, why not use TB's from a bigger motor and mill your own adapter plate for coil your own bolt sizes?

edub370 · 12-18-2013, 11:51 AM

looking at mines, it looks as thought the increase internal diameter by 2.5mm and polished. the tb shaft is flattened out to reduce turbulence and friction

not sure, but i think it requires a new tb plate to be machined.

if u can offer this for a couple hundred bucks and gains are seen, u will sell these like hotcakes!

synolimit · 12-18-2013, 01:49 PM

Grimmspeed ports and polishes.

http://www.grimmspeed.com/throttle-b...drive-by-wire/

370Z JT · 12-18-2013, 01:55 PM

I've contacted maxbore.com they can do it as well. I believe it's 99$ to bore and $35 for low profile screws and shaft per TB.

Chuck33079 · 12-18-2013, 02:08 PM

Quote:

Originally Posted by synolimit

Grimmspeed ports and polishes.

Throttle Body Porting/Coating - Subaru Drive-By Wire - GrimmSpeed

I'm sure they'd do it for us. I'm surprised they haven't reached out to the Nissan community more. They always make pretty good stuff.

AzSpeng · 12-18-2013, 02:09 PM

I also will do it for you guys

Chuck33079 · 12-18-2013, 02:12 PM

Quote:

Originally Posted by AzSpeng

I also will do it for you guys

Become a vendor

AzSpeng · 12-18-2013, 02:22 PM

give me just a second. been talking with ak370z.

1 sec ill have it done.

Chuck33079 · 12-18-2013, 02:22 PM

Quote:

Originally Posted by AzSpeng

give me just a second. been talking with ak370z.

1 sec ill have it done.

Good deal.

We need more vendors, but advertizing your parts and services without being one usually results in a painful modslapping.

AzSpeng · 12-18-2013, 02:41 PM

done!

synolimit · 12-18-2013, 03:15 PM

Quote:

Originally Posted by Chuck33079

I'm sure they'd do it for us. I'm surprised they haven't reached out to the Nissan community more. They always make pretty good stuff.

Yeah I know. Subi FTW but not one nissan part, weird.

12-17-2013, 05:35 PM	#1 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	who can bore out a tb? can any compitent machine shop bore out a tbh, flat edge the pivot piece, and re-size the plates accordingly? i've seen jun and mine's offer it, but im not willing to pay either of those companies anything near what they charge for this. anyone in this country that does it at a decent price? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

12-18-2013, 08:46 AM	#3 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	man you should start doing this for the forum. we are lacking real intake in depth intake mods! __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

12-18-2013, 10:03 AM	#5 (permalink)
Vnismo370z Enthusiast Member Join Date: Nov 2011 Location: Tacoma, Wa Posts: 387 Drives: '15 370z PG Sport Rep Power: 14	Sub'd interested as well, also, why not use TB's from a bigger motor and mill your own adapter plate for coil your own bolt sizes? __________________ starting over

12-18-2013, 11:51 AM	#6 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	looking at mines, it looks as thought the increase internal diameter by 2.5mm and polished. the tb shaft is flattened out to reduce turbulence and friction not sure, but i think it requires a new tb plate to be machined. if u can offer this for a couple hundred bucks and gains are seen, u will sell these like hotcakes! __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

12-18-2013, 01:49 PM	#7 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Grimmspeed ports and polishes. http://www.grimmspeed.com/throttle-b...drive-by-wire/ __________________ 13 370z- Last edited by synolimit; 12-18-2013 at 01:51 PM.

12-17-2013, 06:08 PM	#2 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	I can do this for you.

12-18-2013, 09:43 AM	#4 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	Consider it done. Show me what all needs to be done and lets formulate a plan of attack so I can get pricing up on the site and get a process in place.

12-18-2013, 01:55 PM	#8 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	I've contacted maxbore.com they can do it as well. I believe it's 99$ to bore and $35 for low profile screws and shaft per TB. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

12-18-2013, 02:09 PM	#10 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	I also will do it for you guys

12-18-2013, 02:22 PM	#12 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	give me just a second. been talking with ak370z. 1 sec ill have it done. Chuck33079 likes this.

12-18-2013, 02:41 PM	#14 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	done!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 15mm H&R DRM TRAK+ Spacer pair, 66.1 hub bore.	VQA33	Parts for sale (Private Classifieds)	6	09-12-2013 08:22 AM