who can bore out a tb?

Red_Z · 12-18-2013, 03:15 PM

Sub'd!!!

Rusty · 12-18-2013, 06:05 PM

I'm interested for sure.

edub370 · 12-19-2013, 10:31 AM

anyone know what all is involved on the tuning end of things to make this work?

i.e., is this like an exhaust and you CAN run without a tune, but it won't optimize gains, or will this be something that makes the maf read differently and throw things outta whack?

are we looking at ~5hp here or what?

Chuck33079 · 12-19-2013, 10:47 AM

Quote:

Originally Posted by edub370

anyone know what all is involved on the tuning end of things to make this work?

i.e., is this like an exhaust and you CAN run without a tune, but it won't optimize gains, or will this be something that makes the maf read differently and throw things outta whack?

are we looking at ~5hp here or what?

I can't see a huge power gain unless the intake pipe and manifold inlet is similarly increased in size, and that's going to take tuning. At that point, the increase from the TB alone may be lost in the noise. I can see it providing noticeably better throttle response. While you're at it, you might as well cut off and weld close the coolant nipples, and ceramic coat the outside to ward off radiant heat. Now you've got quite a bit of cost sunk into a part that may not make a whole hell of a lot of difference. It's a different story if you can DIY it.

synolimit · 12-19-2013, 01:57 PM

Quote:

Originally Posted by Chuck33079

While you're at it, you might as well cut off and weld close the coolant nipples

Why?

Chuck33079 · 12-19-2013, 02:02 PM

I'd rather not circulate hot coolant through the TB. I guess you could just cap them off, but if you're paying a company to do a "pro-quality" job I'd like closed up permanently.

SouthArk370Z · 12-19-2013, 02:03 PM

Quote:

Originally Posted by synolimit

Why?

Why not?

Granted, some rubber caps would work just as well but, as long as you're going as far as boring and other mods, why not go ahead and seal 'em up?

7speed · 12-19-2013, 02:09 PM

Thats funny I was thinking about this the other day also and reached out to NWP that does a lot of stuff for vq35. Plus they recently released big bore tb for vq35 cars. On the 350z/G it dynos about 15hp. According to them. My buddy has on his Maxima and its definatley faster than before.

From: Kevin Sent: Tuesday, December 17, 2013 6:04 PM
To: Aaron@NWPEngineering.com
Subject: 370z

Hello,

I miss my Maxima and all your wonderful parts. Do you have anything in the works for 370z ie: big bore tb kit?
--------------------

Thank you for your interest. We definitely hope to have some new products for the 370z in the near future. But our current products are keeping us very busy.

But we do have several potential projects on the table, but I can't speak about them at this time.

Please keep in touch.

Thank you,

NWP Engineering, Inc.
252-375-4NWP (4697)
NWP Engineering, Inc - Custom Design and Fabrication - Automotive Performance Specialist
'Like' us on facebook
Instagram @nwp_engineering

synolimit · 12-19-2013, 02:19 PM

Quote:

Originally Posted by Chuck33079

I'd rather not circulate hot coolant through the TB. I guess you could just cap them off, but if you're paying a company to do a "pro-quality" job I'd like closed up permanently.

No I get that part, it's the welding. Mine are just pulled off and left open. If I ever wanted to reinstall the lines I'd just blow out the tubes and presto, all clean.

Chuck33079 · 12-19-2013, 02:22 PM

Yeah, I'd rather not even have them there. The car's never going back to stock, and it's far from the most invasive thing done to it.

If I were doing the work, I'd be capping it off. If I were paying someone else to do it, I expect them to do a cleaner job than I would.

AzSpeng · 12-19-2013, 02:25 PM

Welding, machining, all of that stuff we can do in house

synolimit · 01-02-2014, 01:53 AM

Grimmspeed said no. Still waiting on Z1 to reply.

luigi90210 · 01-02-2014, 11:43 AM

Couldn't you use the 350z DE throttle body? Iirc that one is bigger than ours.

Alstann · 01-12-2014, 12:32 AM

AzSpeng, also something to note - we aren't the only market for this TB - we share throttle bodies with the GT-R. Same exact and everything.

If you can get some boring done for a great price, I'm sure you'll have the GT-R owners knocking down the door too. As I'm sure people charge the GT-R crowd an arm and a leg for anything.

AzSpeng · 01-12-2014, 12:32 AM

this was brought to my attention just the other day.

im ready to get it done...someone send me a tb.

12-18-2013, 06:05 PM	#17 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,172 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I'm interested for sure. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-19-2013, 10:31 AM	#18 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	anyone know what all is involved on the tuning end of things to make this work? i.e., is this like an exhaust and you CAN run without a tune, but it won't optimize gains, or will this be something that makes the maf read differently and throw things outta whack? are we looking at ~5hp here or what? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

12-19-2013, 02:02 PM	#21 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I'd rather not circulate hot coolant through the TB. I guess you could just cap them off, but if you're paying a company to do a "pro-quality" job I'd like closed up permanently. DEpointfive0 likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

12-19-2013, 02:09 PM	#23 (permalink)
7speed Track Member Join Date: Jan 2013 Location: Dallas Posts: 697 Drives: 09 370 sports clone Rep Power: 13	Thats funny I was thinking about this the other day also and reached out to NWP that does a lot of stuff for vq35. Plus they recently released big bore tb for vq35 cars. On the 350z/G it dynos about 15hp. According to them. My buddy has on his Maxima and its definatley faster than before. From: Kevin Sent: Tuesday, December 17, 2013 6:04 PM To: Aaron@NWPEngineering.com Subject: 370z Hello, I miss my Maxima and all your wonderful parts. Do you have anything in the works for 370z ie: big bore tb kit? -------------------- Thank you for your interest. We definitely hope to have some new products for the 370z in the near future. But our current products are keeping us very busy. But we do have several potential projects on the table, but I can't speak about them at this time. Please keep in touch. Thank you, NWP Engineering, Inc. 252-375-4NWP (4697) NWP Engineering, Inc - Custom Design and Fabrication - Automotive Performance Specialist 'Like' us on facebook Instagram @nwp_engineering __________________ 09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd

12-19-2013, 02:22 PM	#25 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Yeah, I'd rather not even have them there. The car's never going back to stock, and it's far from the most invasive thing done to it. If I were doing the work, I'd be capping it off. If I were paying someone else to do it, I expect them to do a cleaner job than I would. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

12-18-2013, 03:15 PM	#16 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 15	Sub'd!!!

12-19-2013, 02:25 PM	#26 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	Welding, machining, all of that stuff we can do in house

01-02-2014, 01:53 AM	#27 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Grimmspeed said no. Still waiting on Z1 to reply. __________________ 13 370z-

01-02-2014, 11:43 AM	#28 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 15	Couldn't you use the 350z DE throttle body? Iirc that one is bigger than ours. __________________ SOLD 370z New Car:classified DD:2011 Mini Cooper S stock

01-12-2014, 12:32 AM	#29 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 15	AzSpeng, also something to note - we aren't the only market for this TB - we share throttle bodies with the GT-R. Same exact and everything. If you can get some boring done for a great price, I'm sure you'll have the GT-R owners knocking down the door too. As I'm sure people charge the GT-R crowd an arm and a leg for anything. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

01-12-2014, 12:32 AM	#30 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	this was brought to my attention just the other day. im ready to get it done...someone send me a tb. Alstann likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 15mm H&R DRM TRAK+ Spacer pair, 66.1 hub bore.	VQA33	Parts for sale (Private Classifieds)	6	09-12-2013 08:22 AM