New part in the works.

1slow370 · 01-07-2014, 08:59 PM

My favorite is Mcam's dynamic paths in aluminum, solid 3 flute standard length, 95% axial depth, 40% radial depth, and an apropriate feed and speed, so with a YG1 1/2" it is about a .2 x 1.2" cut, and i only have 10k so feed is about 150. The constant chip load gives me about 30-50% better life than a traditional path and it's fast enough, if i had more R's It would match your 1" index-able for sure. When i really want to move material then i bust out the 3/4" which takes a .4x 1.5" cut at 190ipm. Aluminum you can get away with murder, a slight difference in feed or speed doing die work in D2 and you'll be changing inserts all F'ing day.

AzSpeng · 01-07-2014, 09:04 PM

those blocks i posted above are pt110 stainless steel..bout as tough as inconel

im using volumill which is slightly more advanced than the mcam dynamic paths.

i tear it up with a 3 flute niagra 1/2 endmill... 210ipm and .25 woc, im slightly conservtive but not much heh. im sure the neighbors hate us when the machine is running full on.

AzSpeng · 01-07-2014, 09:22 PM

and we are making chips! loud as a mofo in the shop right now

1slow370 · 01-07-2014, 09:54 PM

yeah you know its a good day when you add 60 gallons of coolant to the machine

AzSpeng · 01-07-2014, 10:05 PM

luigi90210 · 01-07-2014, 10:18 PM

could you make a bigger oil pan, one like the greddy pan but without the oil return ports, i hate the fact that thats the only aftermarket oil pan available, and the only thing close to an oil pan is a pan spacer

AzSpeng · 01-07-2014, 10:23 PM

AzSpeng · 01-07-2014, 10:24 PM

Quote:

Originally Posted by luigi90210

could you make a bigger oil pan, one like the greddy pan but without the oil return ports, i hate the fact that thats the only aftermarket oil pan available, and the only thing close to an oil pan is a pan spacer

Of course we can...and we will be glad to....ill add it to the whiteboard right now.

DEpointfive0 · 01-07-2014, 10:26 PM

Quote:

Originally Posted by luigi90210

could you make a bigger oil pan, one like the greddy pan but without the oil return ports, i hate the fact that thats the only aftermarket oil pan available, and the only thing close to an oil pan is a pan spacer

If the market is there, yes. If he's making 1-2. Better mortgage your home. The other thing with an oil pan would be the astronomical cost to make it billet, it would have to be cast first. Then machined.
If AZ wants to take it from here, I'll leave the next response to him.

luigi90210 · 01-07-2014, 10:26 PM

Quote:

Originally Posted by AzSpeng

Of course we can...and we will be glad to....ill add it to the whiteboard right now.

i definitely am looking forward to this

Quote:

Originally Posted by DEpointfive0

If the market is there, yes. If he's making 1-2. Better mortgage your home. The other thing with an oil pan would be the astronomical cost to make it billet, it would have to be cast first. Then machined.
If AZ wants to take it from here, I'll leave the next response to him.

i dont see why there wouldnt be a market for a part like this, more oil means better cooling and right now the only thing available to all non turbo 370zs is a pan spacer, the greddy oil pan is really only for turbo kits unless you block off the oil return ports which would mean added costs on top of the bigger oil pan

AzSpeng · 01-07-2014, 10:28 PM

i know you guys want something affordable...how about we do something thats waterjet cut, press broke, welded, with a cnc milled flange for the oil pan....i could even double layer it and use 5052 grade aluminum.

as for testing..you already know andrew has taken that spot

Rusty · 01-07-2014, 10:59 PM

This is serious sh!t! I love it.

Been awhile since I worked in a fab/machine shop. Brings back memories.

AzSpeng · 01-07-2014, 11:01 PM

thanks!!

1slow370 · 01-08-2014, 01:05 AM

Quote:

Originally Posted by AzSpeng

i know you guys want something affordable...how about we do something thats waterjet cut, press broke, welded, with a cnc milled flange for the oil pan....i could even double layer it and use 5052 grade aluminum.

as for testing..you already know andrew has taken that spot

in translation that means a welded sheet metal pan but with thicker sheets.

AzSpeng · 01-08-2014, 02:05 AM

not just thicker sheets, double sheets

01-07-2014, 08:59 PM	#211 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	My favorite is Mcam's dynamic paths in aluminum, solid 3 flute standard length, 95% axial depth, 40% radial depth, and an apropriate feed and speed, so with a YG1 1/2" it is about a .2 x 1.2" cut, and i only have 10k so feed is about 150. The constant chip load gives me about 30-50% better life than a traditional path and it's fast enough, if i had more R's It would match your 1" index-able for sure. When i really want to move material then i bust out the 3/4" which takes a .4x 1.5" cut at 190ipm. Aluminum you can get away with murder, a slight difference in feed or speed doing die work in D2 and you'll be changing inserts all F'ing day. phunk likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-07-2014, 09:04 PM	#212 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	those blocks i posted above are pt110 stainless steel..bout as tough as inconel im using volumill which is slightly more advanced than the mcam dynamic paths. i tear it up with a 3 flute niagra 1/2 endmill... 210ipm and .25 woc, im slightly conservtive but not much heh. im sure the neighbors hate us when the machine is running full on. phunk likes this.

01-07-2014, 09:22 PM	#213 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	and we are making chips! loud as a mofo in the shop right now phunk likes this.

01-07-2014, 09:54 PM	#214 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	yeah you know its a good day when you add 60 gallons of coolant to the machine AzSpeng likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-07-2014, 10:05 PM	#215 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	GaleForce likes this.

01-07-2014, 10:18 PM	#216 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 15	could you make a bigger oil pan, one like the greddy pan but without the oil return ports, i hate the fact that thats the only aftermarket oil pan available, and the only thing close to an oil pan is a pan spacer __________________ SOLD 370z New Car:classified DD:2011 Mini Cooper S stock

01-07-2014, 10:23 PM	#217 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	GaleForce likes this.

01-07-2014, 10:28 PM	#221 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	i know you guys want something affordable...how about we do something thats waterjet cut, press broke, welded, with a cnc milled flange for the oil pan....i could even double layer it and use 5052 grade aluminum. as for testing..you already know andrew has taken that spot luigi90210 likes this.

01-07-2014, 10:59 PM	#222 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,191 Drives: 2011 Nismo GM 6M Rep Power: 2684437	This is serious sh!t! I love it. Been awhile since I worked in a fab/machine shop. Brings back memories. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-07-2014, 11:01 PM	#223 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	thanks!!

01-08-2014, 02:05 AM	#225 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 12	not just thicker sheets, double sheets

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Part Out - Part Deux	Wiggins3377	Parts for sale (Private Classifieds)	34	06-07-2013 11:17 AM
[FOR SALE] 350Z HR part out, HUGE PART OUT	DEpointfive0	Parts for sale (Private Classifieds)	1	02-19-2013 02:56 PM
How an LSD works	Red__Zed	Engine & Drivetrain	6	05-23-2012 07:07 PM
[FOR SALE] 98intrigue's pretty large part out: Part 2	98intrigue	Parts for sale (Private Classifieds)	25	04-30-2012 09:20 PM
in the works	It`s Z Time	Northern California Region	6	01-16-2012 09:53 PM