how can the shift points in an auto. be raised ???

andre12031948 · 11-18-2013, 10:03 PM

Quote:

Originally Posted by DEpointfive0

Your previous posts imply you use slicks. 12.7-12.8... So top 5 times recorded... And you're NOT going to mod it to hell...

That's a challenge, I'd like to see it done though. Good luck

I did a 13.1 on my first run. Left line at only 1,500 rpm. Can't get 3/10's with test pipes & an Osiris tune????

andre12031948 · 11-18-2013, 10:05 PM

Quote:

Originally Posted by DEpointfive0

Yes, both. You're not understanding, and yes, raising the rev limiter ups the shift points.
What else would it do? It's an auto, it shifts at the redline or damn close to it. You move the redline, it shifts at that red line.

That makes it real simple

If it's a fact.....

DEpointfive0 · 11-18-2013, 10:06 PM

Quote:

Originally Posted by andre12031948

I did a 13.1 on my first run. Left line at only 1,500 rpm. Can't get 3/10's with test pipes & an Osiris tune????

Just going off this list
official 1/4 mile track times
you have a ways to go.

But hey, maybe you ARE the best drag racer on the 370Z

( Click to show/hide )

andre12031948 · 11-18-2013, 10:15 PM

Quote:

Originally Posted by DEpointfive0

Just going off this list
official 1/4 mile track times
you have a ways to go.

But hey, maybe you ARE the best drag racer on the 370Z

( Click to show/hide )

You probably didn't see my post about me putting in my old 350z pumpkin w LSD & 3:90 gears. That was done on thurs, Friday I went racing

The car pulled like a M Fvcker. One run was at almost 108 mph.

Shifted into 5th gear before the finish line, so another benefit of raising shifting point would be NOT getting into 5th gear. Another e/t gain

andre12031948 · 11-18-2013, 10:22 PM

I hope you're right

DEpointfive0 · 11-18-2013, 10:23 PM

Quote:

Originally Posted by andre12031948

You probably didn't see my post about me putting in my old 350z pumpkin w LSD & 3:90 gears. That was done on thurs, Friday I went racing

The car pulled like a M Fvcker. One run was at almost 108 mph.

Shifted into 5th gear before the finish line, so another benefit of raising shifting point would be NOT getting into 5th gear. Another e/t gain

Seen those posts like 100 times.
Changing the gearing will obviously be best bang for the buck for drag racing. Maybe equal with running slicks. So I cannot compare those times taking into account the other times. It's just not apples to apples

andre12031948 · 11-18-2013, 10:27 PM

Quote:

Originally Posted by DEpointfive0

Seen those posts like 100 times.
Changing the gearing will obviously be best bang for the buck for drag racing. Maybe equal with running slicks. So I cannot compare those times taking into account the other times. It's just not apples to apples

I was looking at the bolt on times. Except for the top two, there's no reason, NO CHANCE I can't do the times of the others.

elperuano · 11-18-2013, 11:58 PM

This is why I stopped helping n00bs... it's contagious.

andre12031948 · 11-19-2013, 05:18 AM

Quote:

Originally Posted by elperuano

This is why I stopped helping n00bs... it's contagious.

I looked over all the time lists. Couldn't find your name

Jordo! · 11-19-2013, 06:18 AM

Rev limit can be raised with Uprev. You can then manually shift via paddles or stick up to that RPM without fuel cut or automatic upshift. I'm not 100% certain that raising the rev limit also raises the shift points at WOT... you really shouldn't raise it higher than 7800; I believe OEM is 7500.

If you mean changing the shift schedule in "D", unfortunately, I don't think there's a way with Uprev -- possibly ECUtek can do it.

However, you CAN raise the line pressure with Uprev, meaning faster and firmer shifts.

andre12031948 · 11-19-2013, 08:19 AM

Quote:

Originally Posted by Jordo!

Rev limit can be raised with Uprev. You can then manually shift via paddles or stick up to that RPM without fuel cut or automatic upshift. I'm not 100% certain that raising the rev limit also raises the shift points at WOT... you really shouldn't raise it higher than 7800; I believe OEM is 7500.

If you mean changing the shift schedule in "D", unfortunately, I don't think there's a way with Uprev -- possibly ECUtek can do it.

However, you CAN raise the line pressure with Uprev, meaning faster and firmer shifts.

Thanks^^^^^If that's true, I'll ask my tuner to do that.
I admit not knowing much about today's cars & how they work. It's my age

I don't even want to change my own oil. I do know a bit about drag racing & having mods work together, as apposed to just "the more the better".

Before the recent drag racing of my Z's, I drag raced a bit a long, long time ago with a 1966 Pontiac G.T.O. Long, long ago

That's when I learned how to shift & about balance/working together when it comes to mods.

More recently with my 08 Z. I didn't just buy slicks for that car & do well, it took me 8 months to learn how to really use them

So, I'm a nice guy but tend to post "snappy" responses. Probably due to my age(little patience) & trying to have some fun. Nice, nice all the time is BORING

elperuano · 11-19-2013, 10:57 AM

I can appreciate that response.

Good luck OP.

SouthArk370Z · 11-19-2013, 12:36 PM

Raising the shift points is probably possible by tweaking the TCM. It would appear that no one responding to this thread knows much about tweaking TCMs (the hi-po guys usually go with a manual). I suggest finding some hi-po auto transmission shops/sites and asking there. Let us know what you find out.

Chuck33079 · 11-19-2013, 12:39 PM

Maybe a call to GTM, since they build upgraded autos?

critical · 11-19-2013, 12:49 PM

Your posts hurt my head, op.

11-18-2013, 10:22 PM	#20 (permalink)
andre12031948 Banned Join Date: Feb 2011 Location: monticello new york 127 Posts: 1,095 Drives: 08 350z black 6m/t Rep Power: 0	Thanks for the info I hope you're right

11-19-2013, 06:18 AM	#25 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Rev limit can be raised with Uprev. You can then manually shift via paddles or stick up to that RPM without fuel cut or automatic upshift. I'm not 100% certain that raising the rev limit also raises the shift points at WOT... you really shouldn't raise it higher than 7800; I believe OEM is 7500. If you mean changing the shift schedule in "D", unfortunately, I don't think there's a way with Uprev -- possibly ECUtek can do it. However, you CAN raise the line pressure with Uprev, meaning faster and firmer shifts. __________________ Enjoy it. Destroy it. Last edited by Jordo!; 11-19-2013 at 06:22 AM.

11-19-2013, 12:36 PM	#28 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Raising the shift points is probably possible by tweaking the TCM. It would appear that no one responding to this thread knows much about tweaking TCMs (the hi-po guys usually go with a manual). I suggest finding some hi-po auto transmission shops/sites and asking there. Let us know what you find out. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

11-19-2013, 12:39 PM	#29 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Maybe a call to GTM, since they build upgraded autos? SouthArk370Z likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

11-19-2013, 12:49 PM	#30 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 16	Your posts hurt my head, op. gurneyeagle likes this. __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

11-18-2013, 11:58 PM	#23 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	This is why I stopped helping n00bs... it's contagious.

11-19-2013, 10:57 AM	#27 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	I can appreciate that response. Good luck OP.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Optimal Shift Points	wolf370z	Engine & Drivetrain	18	11-24-2015 12:26 PM
Change AUTO shifting points?	jdsuowner	Engine & Drivetrain	5	05-26-2012 11:50 PM
raised and sittin on 28's	Push370zzz	Other Vehicles	32	08-13-2009 11:32 PM
Optimal shift points?	Skorch	Track / Autocross / Drifting / Dragstrip	9	07-21-2009 01:01 PM
Firiming up auto shift?	av370	Engine & Drivetrain	14	07-11-2009 03:54 AM