P2A00 & P0300 Misfire

Kmccarthy714

Hey guys ive made a thread before and i am still stumped. I have had a P2A00 code since installing my CAI's, since the weather changed here in NY to winter (30's) i have started throwing a P0300(random multi cylinder misfire). I am really stumped as to what to do, my short term fuel trims look good and i don't see an noticeable vacuum leaks. I'm assuming these codes are related through fuel or intake problem but I cant find the problem.

Does anyone have an idea of where too start or a common problem.

Any help is appreciated so i dont keep beating my head against the wall

Jordo!

That's a slow responding O2 sensor code, bank 1, sensor 1.

It could be:

1. Dirty/Bad MAF sensor or wire issue.

2. Damage to sensor or wire on the primary bank 1 O2 (what the code actually means).

3. Something screwy related to the CAI diameter being different from OEM or possibly not being clamped down well enough (MAF's are VERY sensitive to vibration and airflow tumble effects on this car).

Try swapping or cleaning the MAF's. The the problem doesn't move/go away, look into replacing the Bank 1 primary O2.

__________________
Enjoy it. Destroy it.

370Z JT

Ditto on the dirty MAFs. Good luck.

__________________

megalapagas

Instead of starting another thread I rather join in here, my Z just recently threw the code P0300. I just want to know if I can still drive the car until I fix the problem? Also on this code all I have to do is replace the O2 sensors? Or should I take it to dealer? My intake is fine no leaks or anything.

[IMG][/IMG]

__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |

megalapagas

Bump for Help^

__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |

Jordo!

You have a bad MAP sensor and that is probably causing intermittent misreads and incorrect fueling, resulting in a random lean miss and thus the P0300 code. The O2's do not appear to be related here, and seem to be working fine.

In short, yeahhhh... you should be fine at low to moderate load (i.e., normal driving) I wouldn't push it to redline until you get the MAP sensor replaced, as it's not clear how lean you are running when you miss (presumably not enough to be out of range on the fuel trims, but, still best to solve the problem before pushing it).

There was just a thread on this with details where it's located etc in the intake manifold, but if you are still under the drivetrain warranty, I would just take it to the dealer.

__________________
Enjoy it. Destroy it.

megalapagas

Ok, Thx! Very helpful man ill just go dealership but till monday I think they're closed sundays :/

__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |

Kmccarthy714

Yea, thanks for the response, i have previosuly swapped MAF sensors and code came back same bank. Like i said i smoke tested the intake, no leaks found. My next try is to swap the A/F sensors and hope the code moves otherwise, im lost. Thanks for the help ill update you as soon as i find time to do the swap.

Jordo!

I'd just go ahead and order an O2 sensor. That's almost definitely it.

Probably a break on the wire somewhere -- I had that happen to one of my secondary O2's once. Sensor itself was ok, but the wire had a small break in the insulation on it. Swapped out the sensor and problem solved.

Good luck!

__________________
Enjoy it. Destroy it.

Jordo!

BTW, do not clear the codes -- let them see the bad MAP sensor code.

Also, just to clarify in case you aren't familiar with the various sensors involved: it's the MAP (manifold absolute pressure) sensor and not the MAF (Mass Air Flow) sensor -- two different sensors with similar acronyms -- and absolutely not the the O2's.

__________________
Enjoy it. Destroy it.

megalapagas

Yea I didn't clear them and I was the one that made that thread about the MAP sensor whoch should help some ppl out in the future, I had cleaned it before with Maf Cleaner but no luck atall today I plan going to the dealer and getting it fixed I just hope I'm under warranty seeing as I'm at 69k miles but I don't remeber if I bought the extended warranty I hope they'll be lenient and understanding. And to Op hope everything works out for ya man.

__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |

Jordo!

Hmmm.. you may be out of warranty... good luck!

__________________
Enjoy it. Destroy it.

megalapagas

I went but they're close to closing so ill be there tomorrow morning. man I'm so freaking GRATEFUL I got extebded warranty at 75k miles WOOO!! They also told me my vehicle was a recall for the steering lock and that maybe my map sensor can be waranted but they're gonna have to run a diagnostic that costs me $105. Will update soon.

__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |

Jordo!

That "diagnostic" is plugging in a Consult III...

Well, at least the sensor and labor to swap it out will be covered.

__________________
Enjoy it. Destroy it.

megalapagas

QUOTE=Jordo!;2575786]That "diagnostic" is plugging in a Consult III...

Well, at least the sensor and labor to swap it out will be covered.[/QUOTE]


So turns out that my MAP sensor was fine and that my ECM was "Unprogramed", so they reprogramed my ECM and my car is running great so far. I checked my PLX Kiwi and this came out as a permanent code and I checked my AFR on my Kiwi and when I go WOT the AFR is at 12.7 than when before when I had the issue it was 13.4. Don't if that's bad or good but I know my Z feels better than before.

[IMG][/IMG]

__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |