I do have a very slight low pitched noise in my system. My brother played with some stuff while I held it at 1500rpms (the noise is the most obvious
|
|
LinkBack | Thread Tools | Display Modes |
01-25-2010, 09:17 AM | #31 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: Euless, TX [ DFW ]
Age: 42
Posts: 13,531
Drives: Nismo 09-0183 QAB
Rep Power: 49 |
I do have a very slight low pitched noise in my system. My brother played with some stuff while I held it at 1500rpms (the noise is the most obvious there) and we came up with the decision that it was just the noise of the oil flowing through the cooler. It also may be a vibration in the cooler carrying on to the front support that it's mounted to. Waiting for a sunny day so I can get down and look a little better. Has anyone else experienced this? There are no leaks, no rattles, and my temps are quite low compared to before (probably 25-30degs.) It's a sound I can put up with for sure, just wondering.
__________________
2009 NISMO # 0193 | QAB | Albums! | 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) | Custom Headlights | GTSPEC Braces | F.I. Long Tube Headers |
01-25-2010, 11:47 AM | #32 (permalink) |
The370Z.com Sponsor
Join Date: Jun 2009
Location: NLA
Posts: 1,313
Drives: NLA
Rep Power: 18 |
That is the noise we are discussing. To the normal person, who does know their 370Z. They may not notice it. But owners who have logged alot of mileage and know the noises of their cars will be able to pick it out as a *new* noise.
|
01-25-2010, 11:52 AM | #33 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: Euless, TX [ DFW ]
Age: 42
Posts: 13,531
Drives: Nismo 09-0183 QAB
Rep Power: 49 |
Oh I noticed it immediately. Reminded me of a power steering whine. Threw it in neutral, gassed it to 1500 and turned the wheel.. no difference. Not power steering.
Seems to vary with RPM but not directly, so oil flow would make sense. My brother said that tugging on the oil hose made it vary just a little so that was our thought. I watch my temps, check for leaks, and just drive as normal. No big really.
__________________
2009 NISMO # 0193 | QAB | Albums! | 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) | Custom Headlights | GTSPEC Braces | F.I. Long Tube Headers |
01-26-2010, 11:17 AM | #34 (permalink) |
Enthusiast Member
Join Date: Jun 2009
Location: Virginia
Posts: 356
Drives: '14 GTR Premium
Rep Power: 17 |
To try and keep noise down on previous cars and equipment I tried to keep the lines as snug as possible with only allowing minimum line movement. It will help to prevent noise and chaffing of the lines and surrounding components. I used a lot of Nomex/kevlar string and tape, and many small cushion clamps in these cases.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Oil Cooler (scratch built install, lottsa pics).....>. | Modshack | DIY Section (Do-It-Yourself) | 307 | 08-09-2021 03:31 AM |
Oil Cooler install solves the problem? | spearfish25 | Nissan 370Z General Discussions | 26 | 01-03-2012 07:49 PM |
DIY: GT Motorsports Oil Cooler Kit Install/Review | rackley | DIY Section (Do-It-Yourself) | 28 | 03-10-2010 11:38 AM |
Oil Cooler Install Thread | spearfish25 | Nissan 370Z General Discussions | 46 | 05-16-2009 03:46 PM |
Oil Cooler Install and First Service Done by Edmunds.com 04.19.09 | AK370Z | Nissan 370Z General Discussions | 24 | 04-21-2009 05:32 PM |