![]() |
Stillen Supercharger help!
Hi, new to this site and to a 370Z. Just bought a 09 black on orange 370Z and wanted to supercharge it over the winter with a Stillen tuned kit and wanted some help on what else the car will need apart from the kit. Will I need a stronger clutch or sway bars, oil spacer kit or anything else. I just want to do it right and not have any issues.
Thanks Brad |
Welcome!
1. Search feature 2. You ditch Stillen and get the GTM stage 1.5 3. Clutch you will need eventually, same with a CSC. Maybe check out a new flywheel while you're at it. You will obviously need at LEAST 1 - 34 row oil cooler, a spacer won't hurt, maybe get GTM's new oil pan Mayyyybe an ungraded radiator, but mandatory. Go with a CSF. If/when you do, shoot me a PM. I'll hook you up Besides that, look at point 1 |
Spend some time reading these:
http://www.the370z.com/forced-induct...ed-builds.html http://www.the370z.com/forced-induct...ion-noobs.html On that note, things to consider. -Oil cooler is required -Custom tune is required (this will also allow for fan speed adjustment) -Clutch/flywheel/csc will need to replaced at some point, can do it now to maybe cut down on some labor cost -Gauges, you will need to monitor the car beyond the normal gauges. Preferably boost, AF ratio, and possibly oil pressure. Many options, can replace the 3 factory gauges, run a carPC or obd2 reader with extra sensor. |
Thanks for the help!!
|
All times are GMT -5. The time now is 04:23 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2