![]() |
A/F Ratio Meter
I did try to search but did not come up with much :rolleyes:
Would like to get some brand recommendations for a good plug n play Meter that can check A/F ratios and any other options a plus. Thanks :tiphat: |
I've had no problems with my Innovate.
|
I'll put my chip in for Prosport. I have the Premium Halo Analog wideband w/ Bosch sensor and it works great. Good if you like analog gauges.
|
Quote:
If not can you give me a model? Thanks |
Quote:
Looking for a hand held not installed gauge. Thanks |
Quote:
|
I had a innovate too. Sensor lasted only 2 years maybe. It was $69 to replace. That might be good or bad depending on, as it was placed in the bellmouth of a turbo downpipe only 3" from the turbine exhaust. It was nice to be able to plug into a laptop with ease and easy to use with computer software when tuning.
|
Is there a meter that can just plug into the OBD2 port?
I had a Brockway Engineering on my 996tt that connected to the port and gave me all the readings needed. |
Quote:
Android and iPhones have apps that can do that (Torque, Dashcommand) via bluetooth obd adapter, but the afr readout is not accurate, according to my wideband. |
Hi,
I would mount Innovate LM-2. I have Berk HFC with the hole for an additional wide band Lambda sensor. The LM-2 have 8ft of wire to the Lambda. Any suggestion for a passage between the bottom of the car and the cabin? ...passing near the header I suspect that it's too hot for the wires.... Thanks. |
All times are GMT -5. The time now is 10:41 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2