7AT 3.692 Gear Review

Felix 808 · 03-25-2014, 11:59 PM

Quote:

Originally Posted by DjSquall

Where can I get just the gears? My z is up on a hoist with an open pumpkin waiting for a new axle stub... Quaife diff going in

If you have an Auto, you can't put the lower gears in because Nissan decide to use a wacky pumpkin scheme instead of going with a typical carrier split that most other manufactures use.

Quote:

Originally Posted by 1slow370

g37 sedan pumpikins do not work only the coupes. the sedans have 3bolt driveshafts

All you have to do is change the flange. Yes you will need to ensure you put proper pre-load on the bearings, but it's not that big of a deal, especially if you are changing the differential (inside part). it would be a good idea to freshen it up with new bearings anyway, so as stated earlier, the pinion drive flange difference is not a problem, just swap it with the one you have.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.08 Gear Install (7AT) Review	dthem370	Engine & Drivetrain	150	11-28-2017 04:33 AM
7AT 4.08 gear swap review	brucelidat	Engine & Drivetrain	33	09-04-2013 03:47 AM
New Top Gear Review	fuzzywuzzy	Nissan 370Z General Discussions	28	08-25-2011 09:22 AM
UK Top Gear	irishboy	Australia/New Zealand	12	07-28-2009 08:08 AM
NIssan 370Z Top Gear Australia Review (Full Video Inside)	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	24	06-18-2009 01:16 PM