7AT 4.08 gear swap review

brucelidat · 08-24-2013, 02:09 PM

Wait, if you already have 3.692 gears, what are you swapping to? I thought you said you didn't want to do 4.08. I took it as you had an auto with 3.6 and wanted to swap to the 3.6 of a manual.

kcquinn49 · 08-24-2013, 03:14 PM

I need to check my notes. I thought the 7 AT had 3.3 rear end gear.

kcquinn49 · 08-24-2013, 03:16 PM

I have the 7 AT. According to my notes the rear end gear 3.357

I want to swap to 3.692 vs. 4.08.

critical · 08-24-2013, 04:16 PM

Quote:

Originally Posted by kcquinn49

So if I get a 370z MT pumpkin, it already has the 3.692 gear, I can just swamp pumpkins?

Yes, I believe so. Do you have the VLSD? If you swap in the MT VLSD pumpkin, that's all you need to do. Not sure if VLSD or open diff. is a factor though. The pumpkin I have is a VLSD MT one that had a quaife diff. in it. No need to go to 4.08 FD gear.

brucelidat · 08-24-2013, 04:43 PM

sorry, read it wrong. Thought you said you already had a mt. Yes, the pumpkins will just swap.

brucelidat · 08-24-2013, 04:44 PM

If your car has vlsd then you need a manual with vlsd. If not, then no.

kcquinn49 · 08-24-2013, 06:56 PM

No VSLD in the base coupe. I have been looking at the caronetics VSLD. I should do it all at once if I pull the trigger on the 3.692 gear.

brucelidat · 08-24-2013, 06:59 PM

Well, if you're just swapping pumpkins, you can id without an LSD. They're not opening it up. If you're changing gears though, then you can save a lot of labor costs y installing an after market diff at the same time if you plan to go that route. I don't plan to so I didn't. However, if I do decide to, I will regret not doing it at the same time I had the 408 done.

1slow370 · 08-25-2013, 06:27 PM

it doesn't matter if you install the vlsd or open carrier if doing a pumpkin swap, the 370z stubs all have the same flange for the side axles so if you swap the whole pumpkin and stubs together it will fit. only diff you can't put in is the g35/g37 sedan as the driveshaft only has 3 bolts. also remember if you get a 350z or g35 differential you should change out for 370z stubs because the abs rings have different numbers of teeth between the two generations.

brucelidat · 08-26-2013, 02:34 PM

Quote:

Originally Posted by dthem370

just talked to Seb, going to go there tomrw and see if he can fix my cruise control problem too. Will update you all on what happens.

hod did it go? Did you get it worked out?

critical · 08-26-2013, 03:20 PM

Quote:

Originally Posted by 1slow370

it doesn't matter if you install the vlsd or open carrier if doing a pumpkin swap, the 370z stubs all have the same flange for the side axles so if you swap the whole pumpkin and stubs together it will fit. only diff you can't put in is the g35/g37 sedan as the driveshaft only has 3 bolts. also remember if you get a 350z or g35 differential you should change out for 370z stubs because the abs rings have different numbers of teeth between the two generations.

this guy knows his stuff lol

dthem370 · 08-27-2013, 02:38 PM

Quote:

Originally Posted by brucelidat

hod did it go? Did you get it worked out?

It was actually really strange. It worked the first time I tried it when I left his shop, then after I turned it off and back on to try it again, no luck. So it didn't fix the cruise on my car.

brucelidat · 08-27-2013, 04:32 PM

sorry to hear that. I tried mine twice and it was fine, but I will try it again the next time I am cruising on the highway to see if it is still working.

blumango · 09-01-2013, 10:14 AM

Guys, I drive a 7AT (2010 Roadster) and I want to swap to 4:08. Is this the pumpkin I require? New 03 04 05 06 07 Nissan 350Z 09 10 370Z Differential Case 38410 2C500 | eBay

Please advise and thanks in advance!

Felix 808 · 09-01-2013, 10:23 AM

Quote:

Originally Posted by blumango

Guys, I drive a 7AT (2010 Roadster) and I want to swap to 4:08. Is this the pumpkin I require? New 03 04 05 06 07 Nissan 350Z 09 10 370Z Differential Case 38410 2C500 | eBay

Please advise and thanks in advance!

That's the carrier, not the pumpkin, which in most axle assembles is all you need to change, but I guess Nissan decided to use different housings (pumpkins) for some reason

Still stying to get a handle on the Z platform myself

08-24-2013, 02:09 PM	#16 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Wait, if you already have 3.692 gears, what are you swapping to? I thought you said you didn't want to do 4.08. I took it as you had an auto with 3.6 and wanted to swap to the 3.6 of a manual. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-24-2013, 03:16 PM	#18 (permalink)
kcquinn49 Base Member Join Date: Dec 2011 Location: Indiana Posts: 86 Drives: 2011 370Z Coupe Rep Power: 249	I have the 7 AT. According to my notes the rear end gear 3.357 I want to swap to 3.692 vs. 4.08. Last edited by kcquinn49; 08-24-2013 at 03:38 PM.

08-24-2013, 04:43 PM	#20 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	sorry, read it wrong. Thought you said you already had a mt. Yes, the pumpkins will just swap. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-24-2013, 04:44 PM	#21 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	If your car has vlsd then you need a manual with vlsd. If not, then no. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-24-2013, 06:59 PM	#23 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Well, if you're just swapping pumpkins, you can id without an LSD. They're not opening it up. If you're changing gears though, then you can save a lot of labor costs y installing an after market diff at the same time if you plan to go that route. I don't plan to so I didn't. However, if I do decide to, I will regret not doing it at the same time I had the 408 done. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-24-2013, 03:14 PM	#17 (permalink)
kcquinn49 Base Member Join Date: Dec 2011 Location: Indiana Posts: 86 Drives: 2011 370Z Coupe Rep Power: 249	I need to check my notes. I thought the 7 AT had 3.3 rear end gear.

08-24-2013, 06:56 PM	#22 (permalink)
kcquinn49 Base Member Join Date: Dec 2011 Location: Indiana Posts: 86 Drives: 2011 370Z Coupe Rep Power: 249	No VSLD in the base coupe. I have been looking at the caronetics VSLD. I should do it all at once if I pull the trigger on the 3.692 gear.

08-25-2013, 06:27 PM	#24 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	it doesn't matter if you install the vlsd or open carrier if doing a pumpkin swap, the 370z stubs all have the same flange for the side axles so if you swap the whole pumpkin and stubs together it will fit. only diff you can't put in is the g35/g37 sedan as the driveshaft only has 3 bolts. also remember if you get a 350z or g35 differential you should change out for 370z stubs because the abs rings have different numbers of teeth between the two generations. critical likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-27-2013, 04:32 PM	#28 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	sorry to hear that. I tried mine twice and it was fine, but I will try it again the next time I am cruising on the highway to see if it is still working. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

09-01-2013, 10:14 AM	#29 (permalink)
blumango Base Member Join Date: Mar 2013 Location: Singapore Posts: 75 Drives: 2010 370Z Roadster Rep Power: 12	Guys, I drive a 7AT (2010 Roadster) and I want to swap to 4:08. Is this the pumpkin I require? New 03 04 05 06 07 Nissan 350Z 09 10 370Z Differential Case 38410 2C500 \| eBay Please advise and thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.08 Gear Install (7AT) Review	dthem370	Engine & Drivetrain	150	11-28-2017 05:33 AM
4.08 Frontier gear swap	jnaut	Engine & Drivetrain	157	01-23-2015 02:47 AM
3.54 Final Drive Swap Review	KusoSama	Engine & Drivetrain	26	09-26-2014 07:07 PM
3.3 gear swap	LafitteZ	Engine & Drivetrain	8	02-09-2012 11:22 AM
New Top Gear Review	fuzzywuzzy	Nissan 370Z General Discussions	28	08-25-2011 10:22 AM