Clutch slave is going out

luigi90210 · 08-07-2013, 12:23 PM

what should I do?

Sucks cause I'm stranded at the moment.

1st · 08-07-2013, 12:57 PM

Take it to the dealer.
Here is the link that talks about it all.
CSC failure covered under warranty?

This is from MrAurora that posted this:

Update for those interested or experiancing this same issue:

I called Nissan consumer affairs (the number listed in the warranty booklet) and had them pull up the book and read the powertrain section on the phone with me. We had same book which was a pleasant surprise ! Was expecting an different version with exclusions in it but i digress... The powertrain section says "all internal parts except those listed in the not covered section" under transmission coverage. He read the not covered section aloud and it says NOTHING about excluding the slave and that it's covered. He gave me a case number and contact info. I then called the dealer and the gods were kind to me. The Bob-inator was on vacation and i was transferred to a woman who knew her stuff. To make a long story short, she thinks its in the nissan computer wrong because the slave in our cars is not dedicated, its integrated with the throwout bearing and therefor part of the powertrain and should be covered. So as of right now i am scheduled to have the work done under the powertrain warranty on thursday.

kenchan · 08-07-2013, 12:58 PM

Quote:

Originally Posted by luigi90210

what should I do?

Sucks cause I'm stranded at the moment.

you should sell the car and get a new one.

Mt Tam I am · 08-07-2013, 01:03 PM

Quote:

Originally Posted by kenchan

you should sell the car and get a new one.

A new 370 or just anything?

JungleZ · 08-07-2013, 01:13 PM

Why is it everyday I browse this forum bored at work I read a Nissan failure

Chuck33079 · 08-07-2013, 01:22 PM

It may be worth your time to see if the dealer will let you bring them an aftermarket CSC to install. You'll have to pay for the part, but it's far sturdier than the OEM plastic one.

luigi90210 · 08-07-2013, 01:26 PM

Quote:

Originally Posted by Chuck33079

It may be worth your time to see if the dealer will let you bring them an aftermarket CSC to install. You'll have to pay for the part, but it's far sturdier than the OEM plastic one.

Thanks everyone for the replies, I'm going to see if I can get everything installed under warranty. If not hello aftermarket CSC and a light weight flywheel.

luigi90210 · 08-07-2013, 01:26 PM

Quote:

Originally Posted by JungleZ

Why is it everyday I browse this forum bored at work I read a Nissan failure

Its because Nissan just hate their owners lolXD

4r3s · 08-07-2013, 01:29 PM

Quote:

Originally Posted by JungleZ

Why is it everyday I browse this forum bored at work I read a Nissan failure

because this board is based on a car that's made by Nissan.

I'd be willing to bet a lot of money that the same would be true for any car forum out there.

forza370z · 08-07-2013, 01:49 PM

Quote:

Originally Posted by JungleZ

Why is it everyday I browse this forum bored at work I read a Nissan failure

Because you only read into these threads.

kenchan · 08-07-2013, 01:51 PM

wait, this is like a paradox... i go through one door, come out the same door on the same side of the door.

kenchan · 08-07-2013, 01:52 PM

wtf is going on here??!

kenchan · 08-07-2013, 01:53 PM

forza370z · 08-07-2013, 01:54 PM

DIGItonium · 08-07-2013, 02:08 PM

If you're gonna do it... do it in style.

Aww man... can't remote link the above pic.

08-07-2013, 12:23 PM	#1 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 15	Clutch slave is going out what should I do? Sucks cause I'm stranded at the moment.

08-07-2013, 12:57 PM	#2 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,710 Drives: Platinum Z Rep Power: 1616	Take it to the dealer. Here is the link that talks about it all. CSC failure covered under warranty? This is from MrAurora that posted this: Update for those interested or experiancing this same issue: I called Nissan consumer affairs (the number listed in the warranty booklet) and had them pull up the book and read the powertrain section on the phone with me. We had same book which was a pleasant surprise ! Was expecting an different version with exclusions in it but i digress... The powertrain section says "all internal parts except those listed in the not covered section" under transmission coverage. He read the not covered section aloud and it says NOTHING about excluding the slave and that it's covered. He gave me a case number and contact info. I then called the dealer and the gods were kind to me. The Bob-inator was on vacation and i was transferred to a woman who knew her stuff. To make a long story short, she thinks its in the nissan computer wrong because the slave in our cars is not dedicated, its integrated with the throwout bearing and therefor part of the powertrain and should be covered. So as of right now i am scheduled to have the work done under the powertrain warranty on thursday. TreeSemdyZee, luigi90210 and Zbrah like this.

08-07-2013, 01:13 PM	#5 (permalink)
JungleZ Banned Join Date: Aug 2012 Location: orange county,ca Posts: 652 Drives: leased base z... Rep Power: 0	Why is it everyday I browse this forum bored at work I read a Nissan failure luigi90210 likes this.

08-07-2013, 01:22 PM	#6 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	It may be worth your time to see if the dealer will let you bring them an aftermarket CSC to install. You'll have to pay for the part, but it's far sturdier than the OEM plastic one. luigi90210 likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

08-07-2013, 01:51 PM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	wait, this is like a paradox... i go through one door, come out the same door on the same side of the door. kidkotic2001, scionide and forza370z like this.

08-07-2013, 01:52 PM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	wtf is going on here??!

08-07-2013, 01:53 PM	#13 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521

08-07-2013, 01:54 PM	#14 (permalink)
forza370z A True Z Fanatic Join Date: Oct 2011 Location: 403 Forbidden Posts: 2,512 Drives: 2009 NISMO 370Z Rep Power: 19	kenchan likes this. __________________ 09 PW 370z Nismo \| K&N Drop Ins \| HKS Hi Power \| Berk HFCs \| Work Meister S1 3P \| Project Kics R40 Neo Chrome Lug Nuts \| KW V1 \| SPC rear camber arms/toe bolts \| Southbend Stage 3 daily clutch \| Southband 19Ib Steel Flywheel \| ZSpeed CSC

08-07-2013, 02:08 PM	#15 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	If you're gonna do it... do it in style. Aww man... can't remote link the above pic. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch Slave cylinder broke @ 22K	chknhawk	Engine & Drivetrain	37	07-10-2018 11:46 AM
South Bend DXD Xtreme Duty Clutch and Flywheel + HD Slave Kit	Joe@ZSpeed	Drivetrain/Engine	75	07-14-2017 02:53 PM
[FOR SALE] STOCK Clutch kit/ oem slave/oem Intake tubes/	OKC Z	Parts for sale (Private Classifieds)	7	09-25-2012 09:22 AM
Clutch slave cylinder	NizzyBoy	Engine & Drivetrain	1	02-19-2011 03:24 PM