GTM Performance Engineering: High Capacity Oil Pan w/oil baffling system (8qts)
 

We're happy to announce our newly developed High Capacity Oil Pan. Here are some of the details about our oil pan.

• High Capacity (8 quarts)
• Pre-tapped with two 1/8” BSPT ports for fittings or sensors
• Pre-tapped for oil return lines
• Available Baffling System with one way trap doors for oil control under hard cornering
• Finned Aluminum design with large surface area for oil temperature control
• Designed to be used for forced induction or NA cars
• Designed to work on 2012+ cars with factory oil cooler
• No cutting or trimming of vehicle to install
• Direct bolt on and comes with all necessary installation hardware

The first batch of 150 pans are coming (100 for our MHI turbo kit group buy and an additional 50 for those that want this pan by itself) and should be here, ready to ship within 30 days. These will be available on a first come, first serve basis and can be purchased with or without the baffling system.

Here is the link to the new oil pan on our website: GTM Motorsports*::*ENGINE EXTERNALS*::*Oil Pans & Spacers*::*GTM BAFFLED HIGH CAPACITY ALUMINUM OIL PAN ( 8 QUARTS)

Here are some of the pictures of our pan and baffling system:

That's a far more reasonable price than I was expecting. Good job, guys. Putting one on the wish list now. So with your 34r oil cooler, were looking at 9 qts of capacity?

Nice!

Do you guys have any picture side by side with stock?

Sub

Yes.

Sam

Sexay

Is this drop-in compatible with your Garrett TT kits?

Sub'd for the Hell of it!

Sent with TapAhoe

Yes it is .

Sam

I hope the TT kits go out before these oil pans go out separately. :tup:

I've been billed for this on my invoice a couple months back, hoping I have one on already... or ready to get thrown on :icon23: :rofl2:

But I upgraded to Turbosmart Big Bubba BOV's. :icon23: :icon17:

I have a 25 row oil cooler and a Greddy oil pan and I have 9 quart capacity you will be over ten.

Mike, by saying "Designed to work on 2012+ cars with factory oil cooler" do you mean it will not work in any way with 2011- cars? or it will work but with some aditional mods.?

Will it come with block-off plates for the turbo oil returns for those that aren't turbo? IMO, should come with them pre-installed for the same price.

Also, the wording of the product page makes it sound like the baffling and gating doesn't come with it for that price, that it will be extra for those features. Is this the case? If so, what will the "complete" price be?