GTM Performance Engineering: High Capacity Oil Pan w/oil baffling system (8qts)

martin82 · 08-28-2013, 11:45 PM

I got a 2012 w oem cooler plus 34 row cooler with additional sandwich plate, will this still clear/fit???

Sh0velMan · 08-29-2013, 08:46 AM

Quote:

Originally Posted by martin82

I got a 2012 w oem cooler plus 34 row cooler with additional sandwich plate, will this still clear/fit???

Should, the coolant line will pass through the channel they've cast in, the sandwich plate just pushes it out laterally from the block.

SPOHN · 08-29-2013, 10:22 AM

Quote:

Originally Posted by martin82

I got a 2012 w oem cooler plus 34 row cooler with additional sandwich plate, will this still clear/fit???

Yes it does. GTM made it around that platform.

DR_ · 09-19-2013, 11:37 AM

Any new news on this? Are they shipping??

Felix 808 · 09-22-2013, 11:15 AM

Quote:

Originally Posted by DR_

Any new news on this? Are they shipping??

I called Sam on Friday, said they have pans & baffles, but were waiting for the block off plates. He said they should be getting them in within a few days. I hope to be picking one up in 2 weeks being I'll be out that way.

Squall180 · 09-27-2013, 04:47 PM

I am wanting one of these for a 2014, I will order soon.

Felix 808 · 10-05-2013, 01:35 AM

Well today I had the opportunity to see both the Greddy pan & the GTM pan side by side. There is no comparison, the GTM pan is the better way to go. Advantages are, more capacity, no trimming of the sheet metal as it is a direct fit, includes oil pickup tube extension & all hardware to install (Greddy does not) 1 way baffles keeping oil at the pickup tube instead of Greddys fixed baffles. Deeper heat sink fins & more surface area for better cooling. Needless to say I bought the GTM pan today

Thank you Mike for your great service with me just popping by & to Sam for having Jason fab up some block off plates for me while I waited. I truly appreciated that

Pablo thank you for making sure I had everything I needed.

Thank you all again

you have a great oil pan & now I do too.

Rob

JWillis72 · 11-15-2013, 01:00 PM

Did it help your oil temps?

GSS138 · 11-19-2013, 04:21 PM

I'm really liking this product as well but have a question:

I use the ZSpeed aluminum undershroud, the one that has the oil change door. Is that still going to fit and is the drain plug in much of a different place than the OEM pan? Do you know if I will still be able to get to the filter if I do not remove the whole cover?

SPOHN · 11-19-2013, 04:35 PM

The trap door is nice but if any time I'm under my car I'd remove it. Since you there (under the car) take the time to inspect all components threw out the bay.

DR_ · 12-17-2013, 10:44 AM

So is this in-stock yet?

Felix 808 · 12-17-2013, 04:29 PM

Quote:

Originally Posted by JWillis72

Did it help your oil temps?

Yes, but I like the idea of having the baffles & not worring about sucking a dry tube in a hard corner

Quote:

Originally Posted by GSS138

I'm really liking this product as well but have a question:

I use the ZSpeed aluminum undershroud, the one that has the oil change door. Is that still going to fit and is the drain plug in much of a different place than the OEM pan? Do you know if I will still be able to get to the filter if I do not remove the whole cover?

No you can not get to the filter without removing the entire shield. The trap door is of little value with this pan installed.

Quote:

Originally Posted by DR_

So is this in-stock yet?

They had plenty of pans & baffles when I got mine, but they didn't have any block of plates so they made them while I waited. Anyway I would give them a call to make sure

lj909 · 07-07-2014, 06:13 PM

Does this oil pan come with an extended oil tube or is that just for a spacer?

Felix 808 · 07-07-2014, 08:04 PM

Quote:

Originally Posted by lj909

Does this oil pan come with an extended oil tube or is that just for a spacer?

It comes with a spacer type extension & extended bolts. The 1-way baffles also keep the oil at the pick up tube. If you plan on purchasing, I recommend local pick-up & Pay

08-28-2013, 11:45 PM	#31 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	I got a 2012 w oem cooler plus 34 row cooler with additional sandwich plate, will this still clear/fit??? 370zrider likes this.

09-19-2013, 11:37 AM	#34 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	Any new news on this? Are they shipping?? Sh0velMan likes this.

10-05-2013, 01:35 AM	#37 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2807	Well today I had the opportunity to see both the Greddy pan & the GTM pan side by side. There is no comparison, the GTM pan is the better way to go. Advantages are, more capacity, no trimming of the sheet metal as it is a direct fit, includes oil pickup tube extension & all hardware to install (Greddy does not) 1 way baffles keeping oil at the pickup tube instead of Greddys fixed baffles. Deeper heat sink fins & more surface area for better cooling. Needless to say I bought the GTM pan today Thank you Mike for your great service with me just popping by & to Sam for having Jason fab up some block off plates for me while I waited. I truly appreciated that Pablo thank you for making sure I had everything I needed. Thank you all again you have a great oil pan & now I do too. Rob __________________ Semper Fi Μολὼν λαβέ

11-15-2013, 01:00 PM	#38 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Did it help your oil temps? fuct likes this.

11-19-2013, 04:21 PM	#39 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 13	I'm really liking this product as well but have a question: I use the ZSpeed aluminum undershroud, the one that has the oil change door. Is that still going to fit and is the drain plug in much of a different place than the OEM pan? Do you know if I will still be able to get to the filter if I do not remove the whole cover? __________________ Current Mods: Vorpal Weapon +5.

09-27-2013, 04:47 PM	#36 (permalink)
Squall180 Base Member Join Date: Aug 2013 Location: Las Vegas Posts: 22 Drives: 2014 Nissan 370Z M/T Rep Power: 12	I am wanting one of these for a 2014, I will order soon.

11-19-2013, 04:35 PM	#40 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	The trap door is nice but if any time I'm under my car I'd remove it. Since you there (under the car) take the time to inspect all components threw out the bay. __________________

12-17-2013, 10:44 AM	#41 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	So is this in-stock yet?

07-07-2014, 06:13 PM	#43 (permalink)
lj909 Track Member Join Date: May 2014 Location: Riverside Posts: 584 Drives: 40th 370Z Rep Power: 12	Does this oil pan come with an extended oil tube or is that just for a spacer? __________________ PW 07 HR350Z R.I.P. Totaled by 82yr old woman 2010 40th Anniversary 370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
R2C \| M7 \| HKS Intake System - High Performance Intakes!	GenomeTuning	Exhaust/Intake	266	08-31-2014 04:42 AM
GTM Performance Engineering: VQ37VHR Twin Supercharger System	SAM@GTM	Forced Induction	339	03-31-2014 09:35 AM
GTM Performance Engineering: VQ37VHR Twin Supercharger System-First Look	SAM@GTM	Forced Induction	68	12-18-2012 03:29 AM
High capacity oil pan or GTM oil pan spacer?	Elia Cid	Engine & Drivetrain	8	05-20-2011 01:10 AM