GTM Performance Engineering: High Capacity Oil Pan w/oil baffling system (8qts)

Mike@GTM · 07-24-2013, 08:28 PM

We're happy to announce our newly developed High Capacity Oil Pan. Here are some of the details about our oil pan.

High Capacity (8 quarts)
Pre-tapped with two 1/8” BSPT ports for fittings or sensors
Pre-tapped for oil return lines
Available Baffling System with one way trap doors for oil control under hard cornering
Finned Aluminum design with large surface area for oil temperature control
Designed to be used for forced induction or NA cars
Designed to work on 2012+ cars with factory oil cooler
No cutting or trimming of vehicle to install
Direct bolt on and comes with all necessary installation hardware

The first batch of 150 pans are coming (100 for our MHI turbo kit group buy and an additional 50 for those that want this pan by itself) and should be here, ready to ship within 30 days. These will be available on a first come, first serve basis and can be purchased with or without the baffling system.

Here is the link to the new oil pan on our website: GTM Motorsports*::*ENGINE EXTERNALS*::*Oil Pans & Spacers*::*GTM BAFFLED HIGH CAPACITY ALUMINUM OIL PAN ( 8 QUARTS)

Here are some of the pictures of our pan and baffling system:

Chuck33079 · 07-24-2013, 08:31 PM

That's a far more reasonable price than I was expecting. Good job, guys. Putting one on the wish list now. So with your 34r oil cooler, were looking at 9 qts of capacity?

G37sHKS · 07-24-2013, 08:32 PM

Nice!

Do you guys have any picture side by side with stock?

SPOHN · 07-24-2013, 08:39 PM

Sub

SAM@GTM · 07-24-2013, 08:43 PM

Quote:

Originally Posted by Chuck33079

That's a far more reasonable price than I was expecting. Good job, guys. Putting one on the wish list now. So with your 34r oil cooler, were looking at 9 qts of capacity?

Yes.

Sam

SS_Firehawk · 07-24-2013, 08:43 PM

Sexay

bldg636 · 07-24-2013, 08:48 PM

Is this drop-in compatible with your Garrett TT kits?

Dzel · 07-24-2013, 08:51 PM

Sub'd for the Hell of it!

Sent with TapAhoe

SAM@GTM · 07-24-2013, 08:58 PM

Quote:

Originally Posted by bldg636

Is this drop-in compatible with your Garrett TT kits?

Yes it is .

Sam

SPOHN · 07-24-2013, 09:07 PM

I hope the TT kits go out before these oil pans go out separately.

SS_Firehawk · 07-24-2013, 09:19 PM

Quote:

Originally Posted by SPOHN

I hope the TT kits go out before these oil pans go out separately.

I've been billed for this on my invoice a couple months back, hoping I have one on already... or ready to get thrown on

SPOHN · 07-24-2013, 09:27 PM

Quote:

Originally Posted by SS_Firehawk

I've been billed for this on my invoice a couple months back, hoping I have one on already... or ready to get thrown on

But I upgraded to Turbosmart Big Bubba BOV's.

Baer383 · 07-24-2013, 10:10 PM

Quote:

Originally Posted by Chuck33079

That's a far more reasonable price than I was expecting. Good job, guys. Putting one on the wish list now. So with your 34r oil cooler, were looking at 9 qts of capacity?

I have a 25 row oil cooler and a Greddy oil pan and I have 9 quart capacity you will be over ten.

370zrider · 07-24-2013, 10:19 PM

Mike, by saying "Designed to work on 2012+ cars with factory oil cooler" do you mean it will not work in any way with 2011- cars? or it will work but with some aditional mods.?

Sh0velMan · 07-25-2013, 09:01 AM

Will it come with block-off plates for the turbo oil returns for those that aren't turbo? IMO, should come with them pre-installed for the same price.

Also, the wording of the product page makes it sound like the baffling and gating doesn't come with it for that price, that it will be extra for those features. Is this the case? If so, what will the "complete" price be?

07-24-2013, 08:28 PM	#1 (permalink)
Mike@GTM Not an active Vendor. DO NOT BUY Join Date: Sep 2009 Location: California Posts: 391 Drives: '13 Hot Lava FR-S Rep Power: 17	GTM Performance Engineering: High Capacity Oil Pan w/oil baffling system (8qts) We're happy to announce our newly developed High Capacity Oil Pan. Here are some of the details about our oil pan. High Capacity (8 quarts) Pre-tapped with two 1/8” BSPT ports for fittings or sensors Pre-tapped for oil return lines Available Baffling System with one way trap doors for oil control under hard cornering Finned Aluminum design with large surface area for oil temperature control Designed to be used for forced induction or NA cars Designed to work on 2012+ cars with factory oil cooler No cutting or trimming of vehicle to install Direct bolt on and comes with all necessary installation hardware The first batch of 150 pans are coming (100 for our MHI turbo kit group buy and an additional 50 for those that want this pan by itself) and should be here, ready to ship within 30 days. These will be available on a first come, first serve basis and can be purchased with or without the baffling system. Here is the link to the new oil pan on our website: GTM Motorsports::ENGINE EXTERNALS::Oil Pans & Spacers::GTM BAFFLED HIGH CAPACITY ALUMINUM OIL PAN ( 8 QUARTS) Here are some of the pictures of our pan and baffling system: fuct, Legz, G37sHKS and 4 others like this. Last edited by Mike@GTM; 07-25-2013 at 09:32 PM.

07-24-2013, 08:31 PM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	That's a far more reasonable price than I was expecting. Good job, guys. Putting one on the wish list now. So with your 34r oil cooler, were looking at 9 qts of capacity? SPOHN likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-24-2013, 08:39 PM	#4 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Sub __________________

07-24-2013, 08:43 PM	#6 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Sexay __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

07-24-2013, 08:48 PM	#7 (permalink)
bldg636 Base Member Join Date: Sep 2012 Location: Florida Posts: 141 Drives: Nissan 370z Rep Power: 13	Is this drop-in compatible with your Garrett TT kits? __________________ Ross '11 370z Just getting started . . .

07-24-2013, 08:32 PM	#3 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	Nice! Do you guys have any picture side by side with stock?

07-24-2013, 08:51 PM	#8 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Sub'd for the Hell of it! Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-24-2013, 09:07 PM	#10 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I hope the TT kits go out before these oil pans go out separately. __________________

07-24-2013, 10:19 PM	#14 (permalink)
370zrider Base Member Join Date: Sep 2012 Location: Mexico Posts: 106 Drives: 370zM6tour12nosport Rep Power: 13	Mike, by saying "Designed to work on 2012+ cars with factory oil cooler" do you mean it will not work in any way with 2011- cars? or it will work but with some aditional mods.? __________________ Stillen [gen3 CAI + headers + HFC + Exhaust + UD Pulley + lightweight flywheel] + Uprev e-tune+ PC680 Odyssey battery + oil cooler + MishimotoThermostat = 312whp + 252wtq @1,500mts or 5,000ft elevation

07-25-2013, 09:01 AM	#15 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Will it come with block-off plates for the turbo oil returns for those that aren't turbo? IMO, should come with them pre-installed for the same price. Also, the wording of the product page makes it sound like the baffling and gating doesn't come with it for that price, that it will be extra for those features. Is this the case? If so, what will the "complete" price be? Felix 808 likes this. __________________ Buy My Car! \| Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
R2C \| M7 \| HKS Intake System - High Performance Intakes!	GenomeTuning	Exhaust/Intake	266	08-31-2014 04:42 AM
GTM Performance Engineering: VQ37VHR Twin Supercharger System	SAM@GTM	Forced Induction	339	03-31-2014 09:35 AM
GTM Performance Engineering: VQ37VHR Twin Supercharger System-First Look	SAM@GTM	Forced Induction	68	12-18-2012 03:29 AM
High capacity oil pan or GTM oil pan spacer?	Elia Cid	Engine & Drivetrain	8	05-20-2011 01:10 AM