I got a 2012 w oem cooler plus 34 row cooler with additional sandwich plate, will this still clear/fit???

Should, the coolant line will pass through the channel they've cast in, the sandwich plate just pushes it out laterally from the block.

Yes it does. GTM made it around that platform.

Any new news on this? Are they shipping??

I called Sam on Friday, said they have pans & baffles, but were waiting for the block off plates. He said they should be getting them in within a few days. I hope to be picking one up in 2 weeks being I'll be out that way.

I am wanting one of these for a 2014, I will order soon. :happydance:

Well today I had the opportunity to see both the Greddy pan & the GTM pan side by side. There is no comparison, the GTM pan is the better way to go. Advantages are, more capacity, no trimming of the sheet metal as it is a direct fit, includes oil pickup tube extension & all hardware to install (Greddy does not) 1 way baffles keeping oil at the pickup tube instead of Greddys fixed baffles. Deeper heat sink fins & more surface area for better cooling. Needless to say I bought the GTM pan today http://www.gixxer.com/forums/images/smilies/banana.gif

Thank you Mike for your great service with me just popping by & to Sam for having Jason fab up some block off plates for me while I waited. I truly appreciated that :tup: Pablo thank you for making sure I had everything I needed.

Thank you all again :tiphat: you have a great oil pan & now I do too. :happydance:

Rob

Did it help your oil temps?

I'm really liking this product as well but have a question:

I use the ZSpeed aluminum undershroud, the one that has the oil change door. Is that still going to fit and is the drain plug in much of a different place than the OEM pan? Do you know if I will still be able to get to the filter if I do not remove the whole cover?

The trap door is nice but if any time I'm under my car I'd remove it. Since you there (under the car) take the time to inspect all components threw out the bay.

So is this in-stock yet?

Yes, but I like the idea of having the baffles & not worring about sucking a dry tube in a hard corner ;)

No you can not get to the filter without removing the entire shield. The trap door is of little value with this pan installed.



They had plenty of pans & baffles when I got mine, but they didn't have any block of plates so they made them while I waited. Anyway I would give them a call to make sure ;)

Does this oil pan come with an extended oil tube or is that just for a spacer?

It comes with a spacer type extension & extended bolts. The 1-way baffles also keep the oil at the pick up tube. If you plan on purchasing, I recommend local pick-up & Pay ;)