Clutch Slave cylinder broke @ 22K

Fountainhead · 05-27-2014, 11:06 PM

Quote:

Originally Posted by Presto

Why is everyone choosing the zspeed hd csc over the z1 motorsports csc which sits outside the transmission and is easier to service?
Also why do we have to choose what clutch we going to use with the car? What is we change the clutch later on while keeping the csc

Because to use the outside clutch assy you have to change a piece of the housing on the transmission to mount the pivot ball for the clutch arm. Disassembling the transmission isn't my idea of fun when I could just put a Z Speed CSC in there and for a DD not change it for a looonnggg time.

90 ST · 05-28-2014, 01:59 AM

I am now on my 3rd Slave, not happy.

chknhawk · 06-18-2014, 07:57 PM

ditto

Otis · 05-16-2018, 07:19 AM

About to have to do what you did.. happy with your set up?

Thanks Jerry

Otis · 05-16-2018, 07:20 AM

Have you installed a aftermarket one? if so did it fail?? i am about to do my CSC

Thanks Jerry

JARblue · 05-16-2018, 09:24 AM

This thread is 4 years old and most of these guys haven't logged into the forum in several years. Trying doing a little research. There are tons of threads on this subject - some are even stickied at the top of the list.

You really can't go wrong with either of the ZSpeed options (internal or external).

Otis · 07-10-2018, 10:40 AM

Mine went to the floor (26,000 miles), drained or should say flushed out fluid and working fine again... flushed a second time to be safe.. works fine?? luck I guess?

JARblue · 07-10-2018, 10:46 AM

Probably your master cylinder; slave cylinder usually fails catastrophically. Dirty clutch fluid contaminants can get in the cylinder seals and allow air into the system. Might be ok for a little while, but it will happen again. And eventually the seals will fail completely.

05-28-2014, 01:59 AM	#32 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 421	I am now on my 3rd Slave, not happy. chknhawk likes this.

06-18-2014, 07:57 PM	#33 (permalink)
chknhawk Track Member Join Date: May 2012 Location: Kentucky Posts: 541 Drives: Like a batouttahell! Rep Power: 14	ditto 90 ST likes this. __________________ \| AEM \| INVIDIA \| GREDDY \| STANCE \| NISMO \| SETRAB \| STOPTECH \| HAWK \| TOYO \| HANKOOK \| BRIDE (wishlist) \|

05-16-2018, 07:19 AM	#34 (permalink)
Otis Base Member Join Date: Jul 2016 Location: NC Posts: 60 Drives: 2013 370Z Coupe Rep Power: 9	About to have to do what you did.. happy with your set up? Thanks Jerry __________________ 2013Z window Tint, Ividia CBE, FI-HFC . NON Resonated & Drop in K & N Filters

05-16-2018, 07:20 AM	#35 (permalink)
Otis Base Member Join Date: Jul 2016 Location: NC Posts: 60 Drives: 2013 370Z Coupe Rep Power: 9	Have you installed a aftermarket one? if so did it fail?? i am about to do my CSC Thanks Jerry __________________ 2013Z window Tint, Ividia CBE, FI-HFC . NON Resonated & Drop in K & N Filters

05-16-2018, 09:24 AM	#36 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	This thread is 4 years old and most of these guys haven't logged into the forum in several years. Trying doing a little research. There are tons of threads on this subject - some are even stickied at the top of the list. You really can't go wrong with either of the ZSpeed options (internal or external). __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-10-2018, 10:40 AM	#37 (permalink)
Otis Base Member Join Date: Jul 2016 Location: NC Posts: 60 Drives: 2013 370Z Coupe Rep Power: 9	Mine went to the floor (26,000 miles), drained or should say flushed out fluid and working fine again... flushed a second time to be safe.. works fine?? luck I guess? __________________ 2013Z window Tint, Ividia CBE, FI-HFC . NON Resonated & Drop in K & N Filters

07-10-2018, 10:46 AM	#38 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Probably your master cylinder; slave cylinder usually fails catastrophically. Dirty clutch fluid contaminants can get in the cylinder seals and allow air into the system. Might be ok for a little while, but it will happen again. And eventually the seals will fail completely. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZSpeed Performance Heavy Duty CSC Clutch Slave Cylinder	Joe@ZSpeed	Drivetrain/Engine	82	06-17-2020 03:34 PM
I think my master slave cylinder or maybe CSC just went	dmhenderson	Mid-Atlantic Region	89	04-11-2013 09:22 PM
Clutch, Flywheel, and Slave Cylinder Combo Sale at R/T Tuning.	Erik@RTTuning	R/T Tuning	6	12-26-2012 12:10 PM
Clutch slave cylinder	NizzyBoy	Engine & Drivetrain	1	02-19-2011 02:24 PM