N/A HP BRAG thread

rAiN · 07-08-2013, 12:36 AM

Please Tell which Mods you have and which dyno you used to get that number, for an example.

Stillen g3 intake
Fast intention resonated hfc
fast intention non resonated exhaust
tune

= xxx rwhp @ dynojet

lets get the brag on!

Click on the name for detailed mods/which dyno machine was used.

KING OF N/A AS OF 10/28/2014 @ THE370Z. 370 rwhp
1slow370

car/person with over 350 rwhp
-jpritche

car/person with over 340 rwhp
-Mike
-allystephy

car/person with over 330 rwhp
-Trips
-ChipsWithDips

car/person with over 320 rwhp
-MJB
-DEpointfive0
-Megan370z
-FPenvy
-edub370
-Rusty
-UFreefer

car/person with over 310 rwhp
-SS_Firehawk
-LukasC
-mag_black
-brucelidat

car/person with over 300 rwhp
-Maduro
-Riptide67
-ANMVQ

car/person with over 290 rwhp
-

Navyboy916 · 07-08-2013, 05:36 AM

I will list but don't have any rwhp numbers. Is that ok?

DEpointfive0 · 07-08-2013, 06:39 AM

322WHP no tune, 7AT, and that was while hitting the speed limiter

EDIT:

As for my mods:
Stillen G3 with K&N branded water sock things
Megan Test pipes (had a CEL)
Stillen exhaust
Stillen UD pulley

NO tune, stock sport wheels with 20mm Ichiba bolt on spacers, Yokohama S.Drive tires

I only have my 4th gear pulls on a DynoJet at 321, and 4th shows less WHP
When I get home I'll try to find the runs

SS_Firehawk · 07-08-2013, 06:53 AM

310/241lbft STD Dynojet (busted, flip flopped, and miswired O2 sensors)
290/223lbft Mustang Dyno (busted, flip flopped and miswired O2 sensors)
AEM CAI
PPE LTH
Motordyne Y pipe and HFC
Tanabe Medallion exhaust
NST pulleys
Tune (don't ask me how with busted O2 sensors)

Thinking I left a good 20whp/tq on the table :|

MJB · 07-08-2013, 08:11 AM

Stillen G3's
Momentum headers
Ark DT-S CBE
Z1 test pipes
Tuned at Uprev in Austin Tx

324whp/257wtq on Dynojet
Est weight of my Z- 2970lbs

Had exhaust leaks from both TP to header flange (thanks Uprev!) Not sure how much HP that was causing me to lose, and I've also went with a Litespeed CBE. Plan to re dyno when I get a chance.

Mike · 07-08-2013, 08:42 AM

342/275
Stillen Gen 3
Z1 intake manifold mod
Momentum headers
test pipes
Invidia Exhaust with muffler section removed and replaced with 12" glasspacks
Z1 tune.

NA: 342/275. Anyone higher?

gSwift · 07-08-2013, 09:36 AM

Pretty sure these N/A numbers shut everyone down. I'm headed to Z1 soon for my tune and i'd be happy to get close to these.

Quote:

Originally Posted by Mike

342/275
Stillen Gen 3
Z1 intake manifold mod
Momentum headers
test pipes
Invidia Exhaust with muffler section removed and replaced with 12" glasspacks
Z1 tune.

NA: 342/275. Anyone higher?

ChipsWithDips · 07-08-2013, 02:36 PM

Quote:

Originally Posted by Mike

342/275
Stillen Gen 3
Z1 intake manifold mod
Momentum headers
test pipes
Invidia Exhaust with muffler section removed and replaced with 12" glasspacks
Z1 tune.

NA: 342/275. Anyone higher?

What is the Z1 intake manifold mod?

Angermiester · 07-09-2013, 02:52 PM

Quote:

Originally Posted by Mike

342/275
Stillen Gen 3
Z1 intake manifold mod
Momentum headers
test pipes
Invidia Exhaust with muffler section removed and replaced with 12" glasspacks
Z1 tune.

NA: 342/275. Anyone higher?

What is this "Z1 intake manifold mod" you speak of? Awesome numbers btw!

Mike · 07-09-2013, 05:12 PM

Quote:

Originally Posted by Angermiester

What is this "Z1 intake manifold mod" you speak of? Awesome numbers btw!

Its something they do when they do the tune, but its proprietary, so you can only get it done there.

As for 1/4 mile times, that's too boring for me. Sit around all night to get a couple runs that only last a few seconds, no thanks. Almost as boring as standing around all day at auto cross for a few 1 minute runs.

Bswanny · 08-09-2018, 09:13 AM

Quote:

Originally Posted by Mike

342/275
Stillen Gen 3
Z1 intake manifold mod
Momentum headers
test pipes
Invidia Exhaust with muffler section removed and replaced with 12" glasspacks
Z1 tune.

NA: 342/275. Anyone higher?

Do you have audio of exhaust? Always was curious how glasspacks sounded on the 370Z

Spooler · 01-03-2019, 12:05 PM

New record 376hp/299tq.

Spartan 1771 · 01-03-2019, 12:14 PM

Spartan 1771 · 01-03-2019, 12:28 PM

Quote:

Originally Posted by Spooler

New record 376hp/299tq.

Does Z1 video all of their work and dyno runs? It seems odd to me they videoed this car if they didn't know or intend for it to break any records. Yes, they could have gone back and done some of the videos afterwards, but if that's the case, the shots of the cams being replaced couldn't be of the actual car. Just kinda seems weird to me.

Whjaxn17 · 01-03-2019, 12:33 PM

Quote:

Originally Posted by Spartan 1771

Does Z1 video all of their work and dyno runs? It seems odd to me they videoed this car if they didn't know or intend for it to break any records. Yes, they could have gone back and done some of the videos afterwards, but if that's the case, the shots of the cams being replaced couldn't be of the actual car. Just kinda seems weird to me.

I mentioned to them that I thought once that batch of goodies was installed, it would probably be scary close if it didn't beat it, so I'm guessing they agreed and went ahead just in case. I think a big part of it was the cam install because to the best of my knowledge, they've only done those on my car and 1 other, a G37 I believe.

07-08-2013, 12:36 AM	#1 (permalink)
rAiN Track Member Join Date: Jan 2009 Location: va Posts: 721 Drives: 2012 370z mt Rep Power: 18	N/A HP BRAG thread Please Tell which Mods you have and which dyno you used to get that number, for an example. Stillen g3 intake Fast intention resonated hfc fast intention non resonated exhaust tune = xxx rwhp @ dynojet lets get the brag on! Click on the name for detailed mods/which dyno machine was used. KING OF N/A AS OF 10/28/2014 @ THE370Z. 370 rwhp 1slow370 car/person with over 350 rwhp -jpritche car/person with over 340 rwhp -Mike -allystephy car/person with over 330 rwhp -Trips -ChipsWithDips car/person with over 320 rwhp -MJB -DEpointfive0 -Megan370z -FPenvy -edub370 -Rusty -UFreefer car/person with over 310 rwhp -SS_Firehawk -LukasC -mag_black -brucelidat car/person with over 300 rwhp -Maduro -Riptide67 -ANMVQ car/person with over 290 rwhp - Driftomodachi likes this. Last edited by rAiN; 10-28-2014 at 10:35 PM.

07-08-2013, 06:39 AM	#3 (permalink)
DEpointfive0 A True Z Fanatic Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17152	322WHP no tune, 7AT, and that was while hitting the speed limiter EDIT: As for my mods: Stillen G3 with K&N branded water sock things Megan Test pipes (had a CEL) Stillen exhaust Stillen UD pulley NO tune, stock sport wheels with 20mm Ichiba bolt on spacers, Yokohama S.Drive tires I only have my 4th gear pulls on a DynoJet at 321, and 4th shows less WHP When I get home I'll try to find the runs DarkJak, NickTurnon and jlo370z like this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language: Last edited by DEpointfive0; 07-09-2013 at 10:50 AM.

07-08-2013, 06:53 AM	#4 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	310/241lbft STD Dynojet (busted, flip flopped, and miswired O2 sensors) 290/223lbft Mustang Dyno (busted, flip flopped and miswired O2 sensors) AEM CAI PPE LTH Motordyne Y pipe and HFC Tanabe Medallion exhaust NST pulleys Tune (don't ask me how with busted O2 sensors) Thinking I left a good 20whp/tq on the table :\| __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 07-08-2013 at 07:41 AM.

07-08-2013, 08:11 AM	#5 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Stillen G3's Momentum headers Ark DT-S CBE Z1 test pipes Tuned at Uprev in Austin Tx 324whp/257wtq on Dynojet Est weight of my Z- 2970lbs Had exhaust leaks from both TP to header flange (thanks Uprev!) Not sure how much HP that was causing me to lose, and I've also went with a Litespeed CBE. Plan to re dyno when I get a chance. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

07-08-2013, 08:42 AM	#6 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	342/275 Stillen Gen 3 Z1 intake manifold mod Momentum headers test pipes Invidia Exhaust with muffler section removed and replaced with 12" glasspacks Z1 tune. NA: 342/275. Anyone higher? DarkJak, NickTurnon, Maduro and 4 others like this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-08-2013, 05:36 AM	#2 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 14	I will list but don't have any rwhp numbers. Is that ok?

01-03-2019, 12:05 PM	#12 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,918 Drives: 2013 Nismo 370z Rep Power: 2684392	New record 376hp/299tq.

01-03-2019, 12:14 PM	#13 (permalink)
Spartan 1771 A True Z Fanatic Join Date: Nov 2009 Location: Western Maryland Posts: 1,280 Drives: Wife crazy & 09 370Z Rep Power: 105454	__________________ ~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The official: oops i started a "Steering lock recall!!!" Thread; thread	AWSneer	Nissan 370Z General Discussions	31	06-04-2013 10:23 PM
Why no next gen Z thread?	JungleZ	Other Vehicles	6	04-25-2013 09:36 PM
NHL Thread	binary0x01	Sports	4	11-15-2012 09:32 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
TSB Thread?	kannibul	Nissan 370Z General Discussions	31	02-11-2010 02:54 PM