N/A HP BRAG thread

Chuck33079 · 07-10-2013, 09:29 AM

I would hope that a built motor, built trans, slicks and 600 whp would get you more than low 11s.

FPenvy · 07-10-2013, 09:33 AM

Quote:

Originally Posted by Chuck33079

I would hope that a built motor, built trans, slicks and 600 whp would get you more than low 11s.

since a stg 2 TT car is already at 11.1**

Z eliminator · 07-10-2013, 09:36 AM

We allways start with a conservitive time . i feel that i may have to change the diff as 4.08 may be to much for the car with that engine/
3.7's or 3.56 may work.
1/8 mile is 7.92 @ 90.7 miles.
the motordyne intake with stillen G 3's . make a big difference with the gears, it pulls really hard.
GTM want me to put his GTR manifold on it.

Z

FPenvy · 07-10-2013, 09:38 AM

Quote:

Originally Posted by Z eliminator

We allways start with a conservitive time . i feel that i may have to change the diff as 4.08 may be to much for the car with that engine/
3.7's or 3.56 may work.
1/8 mile is 7.92 @ 90.7 miles.
the motordyne intake make a big difference with the gears, it pulls really hard.
GTM want me to put his GTR manifold on it.

Z

did they even finish that GTR manifold or test it?

Chuck33079 · 07-10-2013, 09:39 AM

Since you're running slicks, you may still be able to get away with the 4.08s. On street tires, no way in hell.

Z eliminator · 07-10-2013, 10:25 AM

There drag radials , not slicks.
they have increable traction at 20 lb air preasure.
Must tell you first gear is fast, 2 nd gear is wicked aceleration. ( i call it the gear of punishment ) it gets to 90 km so fast it hard to shift the MM and not hit the limiter at 8100. it just leaves the comption eating your dust,
Now for the bad news with the 4.08 gears. fuel consumption is atleast 20 % more or worse if you put your foot into it.

edub370 · 07-12-2013, 11:10 AM

we need this new mani to come out so we can break 350whp. that much power out of a v6 would be great!

factoring in drivetrain loss (~13%) that would put us at ~395.5hp at the crank. thats 996 gt3 numbers there

carlitos_370z · 07-30-2013, 11:02 AM

damm this thread its really helpful for me

thanks guys for post your mods and numbers. Now I have to search how I can tune my car here in Puerto Rico.... I don't know anyone that tune this cars

Maduro · 09-06-2013, 10:31 PM

Had a bad day on the Dyno couldn't get the Uprev tune to take on My 2013 370z (sport) but these are the Mods I have : Stillen G3 CAI - Berk Test Pipes - Stillen CBE / Living in the NYC area if that makes a difference when Tuning.

Looking to make at least 300 whp - Do you think I will make the list???

PS What's the deal with the Glasspacks

rAiN · 09-06-2013, 11:33 PM

Quote:

Originally Posted by Maduro

Had a bad day on the Dyno couldn't get the Uprev tune to take on My 2013 370z (sport) but these are the Mods I have : Stillen G3 CAI - Berk Test Pipes - Stillen CBE / Living in the NYC area if that makes a difference when Tuning.

Looking to make at least 300 whp - Do you think I will make the list???

PS What's the deal with the Glasspacks

I'm thinking definitely you can, or at least close to it

DEpointfive0 · 09-06-2013, 11:48 PM

Quote:

Originally Posted by Maduro

Had a bad day on the Dyno couldn't get the Uprev tune to take on My 2013 370z (sport) but these are the Mods I have : Stillen G3 CAI - Berk Test Pipes - Stillen CBE / Living in the NYC area if that makes a difference when Tuning.

Looking to make at least 300 whp - Do you think I will make the list???

PS What's the deal with the Glasspacks

Oh yeah, at least 300 without a tune

Glass packs are like really nice resonators, they'll give you a deeper exhaust note

carlitos_370z · 09-09-2013, 07:37 AM

what gas are you going to use??? 91oct, 93oct??

mults · 09-09-2013, 08:00 AM

Just found this thread and am a little reluctant to post my numbers. Just had it dynoed on Saturday at the Ohio G Club get together at IPS Motorsports. Cost was $50 for three pulls on a DynoJet.

Here are the numbers...

288.45 HP
240.07 TQ

All pulls were in 4th gear and I was wishing for higher numbers

. I was told that I could probably squeeze 20 more HP with an Uprev tune. Sorry, but I never got a baseline for comparison.

Mods are in my signature.

carlitos_370z · 09-09-2013, 08:15 AM

Quote:

Originally Posted by mults

Just found this thread and am a little reluctant to post my numbers. Just had it dynoed on Saturday at the Ohio G Club get together at IPS Motorsports. Cost was $50 for three pulls on a DynoJet.

Here are the numbers...

288.45 HP
240.07 TQ

All pulls were in 4th gear and I was wishing for higher numbers

. I was told that I could probably squeeze 20 more HP with an Uprev tune. Sorry, but I never got a baseline for comparison.

Mods are in my signature.

Man i think those numbers are good for the mods that you have.

NickTurnon · 09-09-2013, 10:06 AM

Quote:

Originally Posted by mults

Here are the numbers...

288.45 HP
240.07 TQ

All pulls were in 4th gear and I was wishing for higher numbers

. I was told that I could probably squeeze 20 more HP with an Uprev tune. Sorry, but I never got a baseline for comparison.

Mods are in my signature.

Hate to be a debbie downer, but even with up rev i think you'll maybe pull 8-10whp out of an Uprev tune with your existing mods not 20. Just dont want your hopes to be shot down. So you'll hang out right under 300. 296-299 but still great for the money you've spent!

In colder temps you may even pull better numbers then that.

07-10-2013, 09:29 AM	#76 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	I would hope that a built motor, built trans, slicks and 600 whp would get you more than low 11s. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-10-2013, 09:36 AM	#78 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	We allways start with a conservitive time . i feel that i may have to change the diff as 4.08 may be to much for the car with that engine/ 3.7's or 3.56 may work. 1/8 mile is 7.92 @ 90.7 miles. the motordyne intake with stillen G 3's . make a big difference with the gears, it pulls really hard. GTM want me to put his GTR manifold on it. Z FPenvy likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 07-10-2013 at 09:39 AM.

07-10-2013, 09:39 AM	#80 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Since you're running slicks, you may still be able to get away with the 4.08s. On street tires, no way in hell. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-10-2013, 10:25 AM	#81 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	There drag radials , not slicks. they have increable traction at 20 lb air preasure. Must tell you first gear is fast, 2 nd gear is wicked aceleration. ( i call it the gear of punishment ) it gets to 90 km so fast it hard to shift the MM and not hit the limiter at 8100. it just leaves the comption eating your dust, Now for the bad news with the 4.08 gears. fuel consumption is atleast 20 % more or worse if you put your foot into it. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

07-12-2013, 11:10 AM	#82 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	we need this new mani to come out so we can break 350whp. that much power out of a v6 would be great! factoring in drivetrain loss (~13%) that would put us at ~395.5hp at the crank. thats 996 gt3 numbers there __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

07-30-2013, 11:02 AM	#83 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	damm this thread its really helpful for me thanks guys for post your mods and numbers. Now I have to search how I can tune my car here in Puerto Rico.... I don't know anyone that tune this cars

09-06-2013, 10:31 PM	#84 (permalink)
Maduro Base Member Join Date: Mar 2012 Location: New York Posts: 94 Drives: Nissan 2013 370z Rep Power: 13	Had a bad day on the Dyno couldn't get the Uprev tune to take on My 2013 370z (sport) but these are the Mods I have : Stillen G3 CAI - Berk Test Pipes - Stillen CBE / Living in the NYC area if that makes a difference when Tuning. Looking to make at least 300 whp - Do you think I will make the list??? PS What's the deal with the Glasspacks carlitos_370z likes this.

09-09-2013, 07:37 AM	#87 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	what gas are you going to use??? 91oct, 93oct??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The official: oops i started a "Steering lock recall!!!" Thread; thread	AWSneer	Nissan 370Z General Discussions	31	06-04-2013 11:23 PM
Why no next gen Z thread?	JungleZ	Other Vehicles	6	04-25-2013 10:36 PM
NHL Thread	binary0x01	Sports	4	11-15-2012 10:32 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
TSB Thread?	kannibul	Nissan 370Z General Discussions	31	02-11-2010 03:54 PM