trying to add power

jlask370 · 05-07-2013, 07:48 PM

hey guys i have bolt ons for my Z...CAI, HEADERS, EXHAUST. im looking for other options and opinions on adding power without doing FI (forced induction) or is that my only/best other option?

logenl7 · 05-07-2013, 08:16 PM

HFC's or TP's.. M370 manifold.. tune.. engine build.. 4.10 gears

Grindkiezer · 05-07-2013, 08:16 PM

Test pipes or HFC?

Edit: Ha dang you beat me by a second

gomer_110 · 05-07-2013, 08:48 PM

OP, are your headers shorties or long tubes? If they're shorties then replace them with long tubes unless they're the momentum headers. Other than that, the M370 manifold and a tune are about the only other bolt-ons left as far as power mods go. The rearend gear and a lightweight flywheel will liven up the car even though they don't technically don't add power.

Tuning wise, I'd probably wait until ECUtek gets the VVEL part all ironed out and then get it tuned using that software.

You could get a hold of visconti on the forum here. He's pushing the ECUtek tuning software and was talking about an E85 setup that he wants to develop for the Z34 platform. He seemed pretty confident that the ethanol option was the next step for adding easy power to the motor.

370Z JT · 05-07-2013, 08:57 PM

Pullies, bored throttle bodies, weight reduction.

jlask370 · 05-07-2013, 09:07 PM

long tube headers, no cats. i am def thinking about getting a tune not sure which or where unless someone knows a good shop in the NJ area. and the m370 manifold i dont know much about ill do some research and look into it. do you have any info or specs on it? thanks

gomer_110 · 05-07-2013, 09:11 PM

The M370 is really just a 350Z manifold with new bolt holes for proper mounting. The general consensus is that you must get a tune to realize any gains from the manifold. Also the gains are going to be midrange not peak.

jlask370 · 05-07-2013, 09:14 PM

thanks for the info brother greatly appreciated

Rusty · 05-07-2013, 09:33 PM

Quote:

Originally Posted by jlask370

long tube headers, no cats. i am def thinking about getting a tune not sure which or where unless someone knows a good shop in the NJ area. and the m370 manifold i dont know much about ill do some research and look into it. do you have any info or specs on it? thanks

RT Tuning. If you want to take a drive. Vince tuned mine.

jlask370 · 05-08-2013, 09:02 PM

ive been looking into the m370 manifold by motordyne and have seen lots of mixed reviews is it worth the money for those who have it??

gomer_110 · 05-08-2013, 09:14 PM

Quote:

Originally Posted by jlask370

ive been looking into the m370 manifold by motordyne and have seen lots of mixed reviews is it worth the money for those who have it??

It really depends on what your goals are. If you only care about peak HP then it's probably not worth it since these typically don't net you much up top.

Now if you live in reality and care about the midrange power then my opinion is buy the M370.

jlask370 · 05-08-2013, 09:19 PM

gomer 110 appreciate all the input brother thanks. yeah i looked into it and the peak loss compared to the gain in midrange seems to be minor however digging around on the forum i see some people saying the had almost no gains in any hp with it..and others saying they did notice a difference right away

DEpointfive0 · 05-08-2013, 09:21 PM

Quote:

Originally Posted by gomer_110

The M370 is really just a 350Z manifold with new bolt holes for proper mounting. The general consensus is that you must get a tune to realize any gains from the manifold. Also the gains are going to be midrange not peak.

COMPLETELY disagree, sorry brother

Quote:

Originally Posted by jlask370

ive been looking into the m370 manifold by motordyne and have seen lots of mixed reviews is it worth the money for those who have it??

I make a manifold conversion too and I dyno'd it, installed the new manifold, then re-dyno'd it, same day, didn't even move the car, AND my car had TP's, intakes, a CBE, and no tune

I lost 2-4WHP peak (above 7200RPM), but gained 12-15HP AND TQ across MOST the powerband. The loss of peak HP is NOTHING compared to the area you gain under the curve.
Ask ChrisChhorn, he's got my manifold

NitrousZ34 · 05-09-2013, 12:47 AM

Quote:

Originally Posted by DEpointfive0

COMPLETELY disagree, sorry brother

I make a manifold conversion too and I dyno'd it, installed the new manifold, then re-dyno'd it, same day, didn't even move the car, AND my car had TP's, intakes, a CBE, and no tune

I lost 2-4WHP peak (above 7200RPM), but gained 12-15HP AND TQ across MOST the powerband. The loss of peak HP is NOTHING compared to the area you gain under the curve.
Ask ChrisChhorn, he's got my manifold

uhhhhhhhhhhhh make me one?

chrischhorn · 05-09-2013, 12:50 AM

I have the most rare manifold! Only 1 every made!!! Muhahahahaha!

05-07-2013, 07:48 PM	#1 (permalink)
jlask370 Base Member Join Date: Jan 2013 Location: NJ Posts: 36 Drives: 40th 370z Rep Power: 13	trying to add power hey guys i have bolt ons for my Z...CAI, HEADERS, EXHAUST. im looking for other options and opinions on adding power without doing FI (forced induction) or is that my only/best other option?

05-07-2013, 08:16 PM	#3 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 14	Test pipes or HFC? Edit: Ha dang you beat me by a second __________________ Z

05-07-2013, 08:48 PM	#4 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	OP, are your headers shorties or long tubes? If they're shorties then replace them with long tubes unless they're the momentum headers. Other than that, the M370 manifold and a tune are about the only other bolt-ons left as far as power mods go. The rearend gear and a lightweight flywheel will liven up the car even though they don't technically don't add power. Tuning wise, I'd probably wait until ECUtek gets the VVEL part all ironed out and then get it tuned using that software. You could get a hold of visconti on the forum here. He's pushing the ECUtek tuning software and was talking about an E85 setup that he wants to develop for the Z34 platform. He seemed pretty confident that the ethanol option was the next step for adding easy power to the motor. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

05-07-2013, 08:57 PM	#5 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 379	Pullies, bored throttle bodies, weight reduction. Gibby1113 likes this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

05-07-2013, 09:11 PM	#7 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	The M370 is really just a 350Z manifold with new bolt holes for proper mounting. The general consensus is that you must get a tune to realize any gains from the manifold. Also the gains are going to be midrange not peak. Gibby1113 likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

05-07-2013, 08:16 PM	#2 (permalink)
logenl7 Enthusiast Member Join Date: Sep 2012 Location: Marysville Ohio Age: 38 Posts: 357 Drives: 09 Nissan 370Z 6M Rep Power: 13	HFC's or TP's.. M370 manifold.. tune.. engine build.. 4.10 gears

05-07-2013, 09:07 PM	#6 (permalink)
jlask370 Base Member Join Date: Jan 2013 Location: NJ Posts: 36 Drives: 40th 370z Rep Power: 13	long tube headers, no cats. i am def thinking about getting a tune not sure which or where unless someone knows a good shop in the NJ area. and the m370 manifold i dont know much about ill do some research and look into it. do you have any info or specs on it? thanks

05-07-2013, 09:14 PM	#8 (permalink)
jlask370 Base Member Join Date: Jan 2013 Location: NJ Posts: 36 Drives: 40th 370z Rep Power: 13	thanks for the info brother greatly appreciated

05-08-2013, 09:02 PM	#10 (permalink)
jlask370 Base Member Join Date: Jan 2013 Location: NJ Posts: 36 Drives: 40th 370z Rep Power: 13	ive been looking into the m370 manifold by motordyne and have seen lots of mixed reviews is it worth the money for those who have it??

05-08-2013, 09:19 PM	#12 (permalink)
jlask370 Base Member Join Date: Jan 2013 Location: NJ Posts: 36 Drives: 40th 370z Rep Power: 13	gomer 110 appreciate all the input brother thanks. yeah i looked into it and the peak loss compared to the gain in midrange seems to be minor however digging around on the forum i see some people saying the had almost no gains in any hp with it..and others saying they did notice a difference right away

05-09-2013, 12:50 AM	#15 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 17	I have the most rare manifold! Only 1 every made!!! Muhahahahaha! gomer_110, DEpointfive0 and Gibby1113 like this. __________________ R.I.P. 8/01/13 1SlowZ One day I'll have another....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decreased power loss of power	simota1	Engine & Drivetrain	96	10-28-2019 07:10 PM
WTB: HKS Hi Power Ti	Footloose301	Wanted	1	10-31-2010 05:35 PM
WTB: HKS Hi-Power	hfrog355	Parts for sale (Private Classifieds)	1	10-14-2010 01:57 PM
hks hi-power + any hfc	ncheung85	Intake/Exhaust	18	10-14-2010 01:49 PM
NA Power	carfr3ak	Engine & Drivetrain	2	09-26-2009 02:19 AM