Headers

Dwnshift · 04-27-2013, 03:04 AM

That's just what custom set of Burns Stainless or Coast Fabrication headers cost.I can't remember who built the first set. But now they are a little cheaper.
They are equal length, 3 stage stepped, long primaries.
Not sure they would be ideal for a street car as they are spec'd for the engine build.

DarkJak · 04-27-2013, 03:46 AM

Equal length, 3 step, lth...sounds a lot like PPE's headers. I'm guessing the materials and collectors are better though. I just looked on Burns Stainless's site and they have hourglass shapes at their ends which current headers for our cars do not.

Dwnshift · 04-29-2013, 02:35 PM

From looking at the pictures of the PPE headers..I would say we have different diameters as well as longer primary length...merge collector is a lot different on ours.
Not sure what one side of ours weighs exactly but it's no much at all.

Kingbaby · 04-29-2013, 04:34 PM

no pics? What the specs on your headers?

Dwnshift · 04-29-2013, 06:16 PM

I do not have pics of our headers.
We only have one set and they are installed.

Naum16 · 04-29-2013, 11:53 PM

Since Im considering headers i was told not to go cheap and was looking for a good solution. I dont care about labor but around my area i just could find any trustworthy shops that know what there doing. If i do it myself and get far and screw up somewhere theres no turning back

XwChriswX · 04-29-2013, 11:55 PM

Quote:

Originally Posted by Naum16

Since Im considering headers i was told not to go cheap and was looking for a good solution. I dont care about labor but around my area i just could find any trustworthy shops that know what there doing. If i do it myself and get far and screw up somewhere theres no turning back

Is there a question in this..?

04-27-2013, 03:46 AM	#32 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	Equal length, 3 step, lth...sounds a lot like PPE's headers. I'm guessing the materials and collectors are better though. I just looked on Burns Stainless's site and they have hourglass shapes at their ends which current headers for our cars do not. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what next? headers?	pseftis	Engine & Drivetrain	41	12-01-2012 09:21 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 11:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 08:17 PM
[WTB] WTB headers	Dwv2005	Parts for sale (Private Classifieds)	0	02-27-2012 10:00 PM
FI Headers??	dlmartin81	Intake/Exhaust	6	04-19-2010 08:03 AM

04-27-2013, 03:04 AM	#31 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	That's just what custom set of Burns Stainless or Coast Fabrication headers cost.I can't remember who built the first set. But now they are a little cheaper. They are equal length, 3 stage stepped, long primaries. Not sure they would be ideal for a street car as they are spec'd for the engine build.

04-29-2013, 02:35 PM	#33 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	From looking at the pictures of the PPE headers..I would say we have different diameters as well as longer primary length...merge collector is a lot different on ours. Not sure what one side of ours weighs exactly but it's no much at all.

04-29-2013, 06:16 PM	#35 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	I do not have pics of our headers. We only have one set and they are installed.

04-29-2013, 11:53 PM	#36 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 12	Since Im considering headers i was told not to go cheap and was looking for a good solution. I dont care about labor but around my area i just could find any trustworthy shops that know what there doing. If i do it myself and get far and screw up somewhere theres no turning back