Headers

Naum16 · 04-26-2013, 12:08 AM

i think ill be looking around FI thanks guys. Could i ask who installed them for you and how diffcult is it

Naum16 · 04-26-2013, 12:09 AM

The only headers i see for FI are the long tube are they any good for the price

Rusty · 04-26-2013, 12:44 AM

I have FI LTH's, and love them.

I installed the headers myself. Being an old ASE Cert Master Tech.The right takes about 2hrs tops to remove the old manifold and install the header.

The left side is a major PITA. Figure 6+ hrs. This is for any header you install. You have to remove a heat shield from the stock manifold. This heat shield will make you look for a gun and start chewing on the end of it. Once it's off, things start to go easier. Clearance for your hands is TIGHT! After you are done. Your hands will look like they have been in a fight with a very pissed off putty cat and LOST!

Sway · 04-26-2013, 01:55 AM

Quote:

Originally Posted by chrischhorn

Most beautiful and one of the most expensive headers definitely goes to 5zigen.

5zigen - EXM-SP - Exhaust Manifold Special - Nengun Performance

Gains aren't really know but it looks AWESOME!!!

Those are insanely beautiful... however in the Z you wouldn't really be able to see them as much as I'd like.... =(

Naum16 · 04-26-2013, 08:42 AM

Well thanks to youtube i was able to hear how the long tube headers sound and by far its such a good quality sound. I wouldnt mind to try it with one of my budies that is very good and knows exactly what he's doing but idk if i should put him threw this hard work lol. Is it something thats do able for first timers. Or Where would be my options to take it in at. I live near Chicago but im not looking to pay way over my head for an install. Talking about tight theres so much limited space putting my big *** hands down there will be like bobbing for an apple.

Naum16 · 04-26-2013, 08:42 AM

Have you put it on a Dyno What kinds of numbers are you running to the wheels (rwhp)

XwChriswX · 04-26-2013, 08:46 AM

Quote:

Originally Posted by Naum16

Well thanks to youtube i was able to hear how the long tube headers sound and by far its such a good quality sound. I wouldnt mind to try it with one of my budies that is very good and knows exactly what he's doing but idk if i should put him threw this hard work lol. Is it something thats do able for first timers. Or Where would be my options to take it in at. I live near Chicago but im not looking to pay way over my head for an install. Talking about tight theres so much limited space putting my big *** hands down there will be like bobbing for an apple.

If it's not something you've done before, it's not impossible, but it would probably be better left to having a shop do it.

Quote:

Originally Posted by Naum16

Have you put it on a Dyno What kinds of numbers are you running to the wheels (rwhp)

There are the PPE and Fast Intentions Header threads that will have all of that information for you. As well as several independent reviews in the Intake/Exhaust section of the Tech Area.

Naum16 · 04-26-2013, 09:51 AM

Thanks Chris and Rusty

Dwnshift · 04-26-2013, 01:19 PM

I believe our headers run about $6500 for a set.

Kingbaby · 04-26-2013, 01:27 PM

^^^

pics?

XwChriswX · 04-26-2013, 02:42 PM

Quote:

Originally Posted by Dwnshift

I believe our headers run about $6500 for a set.

Shortys, or long tubes? Gains over stock, other headers?

Titanium to justify cost?

gomer_110 · 04-26-2013, 10:01 PM

Quote:

Originally Posted by XwChriswX

Shortys, or long tubes? Gains over stock, other headers?

Titanium to justify cost?

No, unobtainium.

370zrider · 04-26-2013, 10:28 PM

$6,500 for a set of headers?... what are they made of? adamantium? LOL

Rusty · 04-26-2013, 10:32 PM

Quote:

Originally Posted by Dwnshift

I believe our headers run about $6500 for a set.

Are they 180 degree headers?

JC671 · 04-27-2013, 12:38 AM

Quote:

Originally Posted by Naum16

I'm looking to go expensive for a set of headers. anyone have any suggestions that they know off/ performance wise

OP going off what you originally said. You wanted an expensive set of headers yet don't want to pay alot for labor...

Something wrong here....

Are you looking to pay for proven performance or just buy expensive headers just to say you have expensive headers? Because in our engine bay you can't see the headers for crap...

04-26-2013, 12:44 AM	#18 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	I have FI LTH's, and love them. I installed the headers myself. Being an old ASE Cert Master Tech.The right takes about 2hrs tops to remove the old manifold and install the header. The left side is a major PITA. Figure 6+ hrs. This is for any header you install. You have to remove a heat shield from the stock manifold. This heat shield will make you look for a gun and start chewing on the end of it. Once it's off, things start to go easier. Clearance for your hands is TIGHT! After you are done. Your hands will look like they have been in a fight with a very pissed off putty cat and LOST! XwChriswX, JC671, Dzel and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-26-2013, 09:51 AM	#23 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 12	Thanks Chris and Rusty Rusty likes this. Last edited by Naum16; 04-26-2013 at 10:06 AM.

04-26-2013, 10:28 PM	#28 (permalink)
370zrider Base Member Join Date: Sep 2012 Location: Mexico Posts: 106 Drives: 370zM6tour12nosport Rep Power: 13	$6,500 for a set of headers?... what are they made of? adamantium? LOL __________________ Stillen [gen3 CAI + headers + HFC + Exhaust + UD Pulley + lightweight flywheel] + Uprev e-tune+ PC680 Odyssey battery + oil cooler + MishimotoThermostat = 312whp + 252wtq @1,500mts or 5,000ft elevation

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what next? headers?	pseftis	Engine & Drivetrain	41	12-01-2012 09:21 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 11:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 08:17 PM
[WTB] WTB headers	Dwv2005	Parts for sale (Private Classifieds)	0	02-27-2012 10:00 PM
FI Headers??	dlmartin81	Intake/Exhaust	6	04-19-2010 08:03 AM

04-26-2013, 12:08 AM	#16 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 12	i think ill be looking around FI thanks guys. Could i ask who installed them for you and how diffcult is it

04-26-2013, 12:09 AM	#17 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 12	The only headers i see for FI are the long tube are they any good for the price

04-26-2013, 08:42 AM	#20 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 12	Well thanks to youtube i was able to hear how the long tube headers sound and by far its such a good quality sound. I wouldnt mind to try it with one of my budies that is very good and knows exactly what he's doing but idk if i should put him threw this hard work lol. Is it something thats do able for first timers. Or Where would be my options to take it in at. I live near Chicago but im not looking to pay way over my head for an install. Talking about tight theres so much limited space putting my big *** hands down there will be like bobbing for an apple.

04-26-2013, 08:42 AM	#21 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 12	Have you put it on a Dyno What kinds of numbers are you running to the wheels (rwhp)

04-26-2013, 01:19 PM	#24 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	I believe our headers run about $6500 for a set.