Tips/Tricks to bleed the CSC?

Mitco39

I have spent a total of around 8 hours trying to get this thing bled. I got the upgraded CSC from Zspeed performance. Did everything I was told and its just not working. I even pulled out the master cylinder to ensure that everything was correct.

I was told to crack the bleeder and let it gravity drip down, well I let it sit about an hour and the res barely went down. If I pump the master cylinder (now disconnected from the RJM and just using my hand on the plunger I get a squirt of fluid. But even after doing this a bunch of times and then tightening the bleed screw there is still nothing at the pedal.

I have tried a vac pump to try and suck the fluid down with no luck. I have also tried to force it upwards using a oil can (didnt work because of the way the fittings are designed on this CSC (just leaked out around the breather fitting).

Not sure where else to go at this point, no matter what I do I cannot get any feel in the pedal.


Any tips or tricks would be much appreciated.


Mitch

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html