Transmission and Motor Mounts?

Chuck33079 · 04-16-2013, 12:45 PM

Quote:

Originally Posted by Motion Lab

Drop Engineering also has some very nice looking mounts.

Were these the ones that a forum member bought and they self destructed almost instantly?

diddy535 · 04-16-2013, 12:59 PM

Yes, Review: Drop Engineering Transmission Mount

I have the Z1 mount. Can't say enough about it. Over time and use the oem mount with become more soft. The Z1 mount gives a sharper response over the oem. NVH is little but passes the girlfriend test - as in she didn't even notice.

Chuck33079 · 04-16-2013, 01:07 PM

Quote:

Originally Posted by diddy535

Yes, Review: Drop Engineering Transmission Mount

I have the Z1 mount. Can't say enough about it. Over time and use the oem mount with become more soft. The Z1 mount gives a sharper response over the oem. NVH is little but passes the girlfriend test - as in she didn't even notice.

The motor or tranny mount? I'm very tempted to grab the tranny mount, but the motor mount is apparently a bitch to install with turbo plumbing in the way.

diddy535 · 04-16-2013, 01:15 PM

Tranny. Easy install too once you get under there.

bldg636 · 06-03-2013, 07:10 PM

Definitely thinking about new motor mounts . . . I noticed Z1 has both the polyurethane mounts and solid aluminum mounts . . . anyone recommend one versus the other? I'm thinking that the aluminum should have awesome power transfer, but excessive vibration . . . . the polyurethane seems like it would be a good compromise . . . . anyone have any insights? Thanks!

SPOHN · 06-03-2013, 07:20 PM

I have the poly. All the 370Z race teams use the poly. So that made it a easy decision for me.

MJB · 06-03-2013, 07:25 PM

I really like my Z1 transmission mount! Smoother shifting since there is less movement of the tranny.

gbrettin · 06-03-2013, 11:27 PM

I have the Z1 Urethane Motor/Trans (7AT) mounts in my car. There is a noticeable difference on how the car plants the power now.

The car will not shake its self to death after the install. However, the car does tremble a little bit at idle. I really don't mind because it makes me think that the car is shuddering with power and ready to spring alive.

Bottom line - Would I do this again? Hands down, yes.

Shamu · 03-15-2014, 02:32 PM

Who makes the most narrow solid engine mount for 370z? I have Z1 semisolid now but need something even narrower? Need to clear some things in current build so need narrowest solid mount I can find. Any ideas on existing mounts? I guess worse case I can have some aluminum custom machined but buying existing set would be nice. Are the Z1 solid mounts more narrow than their semi solid mounts?

DEpointfive0 · 03-15-2014, 04:20 PM

Quote:

Originally Posted by Shamu

Who makes the most narrow solid engine mount for 370z? I have Z1 semisolid now but need something even narrower? Need to clear some things in current build so need narrowest solid mount I can find. Any ideas on existing mounts? I guess worse case I can have some aluminum custom machined but buying existing set would be nice. Are the Z1 solid mounts more narrow than their semi solid mounts?

Paging John/Jon

Chuck33079 · 03-15-2014, 06:11 PM

Quote:

Originally Posted by Shamu

Who makes the most narrow solid engine mount for 370z? I have Z1 semisolid now but need something even narrower? Need to clear some things in current build so need narrowest solid mount I can find. Any ideas on existing mounts? I guess worse case I can have some aluminum custom machined but buying existing set would be nice. Are the Z1 solid mounts more narrow than their semi solid mounts?

As much as I hate to even suggest such a thing, GTM's mounts for their SC kit may be what you need. Whether you would get them after placing the order is a whole different question.

synolimit · 03-15-2014, 07:42 PM

I've done solid diff mounts, nothing has changed. feels and sounds the same. But in a WRX I did poly motor mounts and cold start up would knock your teeth loose. If it means anything I plan on poly motor mounts again but solid tranny.

1slow370 · 03-16-2014, 04:23 AM

yeah full poly Z1's here motor trans and poly diff and yeah it's loud, cant wait to do the subframe and make it even louder yay

L33T Z34 · 03-17-2014, 12:05 AM

Polyurethane mounts always > rubber POS OEM mounts...
Why is this even ????

SPOHN · 03-17-2014, 08:58 AM

Quote:

Originally Posted by Chuck33079

As much as I hate to even suggest such a thing, GTM's mounts for their SC kit may be what you need. Whether you would get them after placing the order is a whole different question.

GTM (GET THAT MONEY). Get no product.

04-16-2013, 12:59 PM	#17 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 15	Yes, Review: Drop Engineering Transmission Mount I have the Z1 mount. Can't say enough about it. Over time and use the oem mount with become more soft. The Z1 mount gives a sharper response over the oem. NVH is little but passes the girlfriend test - as in she didn't even notice. gbrettin likes this. __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html

04-16-2013, 01:15 PM	#19 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 15	Tranny. Easy install too once you get under there. __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html

06-03-2013, 07:10 PM	#20 (permalink)
bldg636 Base Member Join Date: Sep 2012 Location: Florida Posts: 141 Drives: Nissan 370z Rep Power: 13	Definitely thinking about new motor mounts . . . I noticed Z1 has both the polyurethane mounts and solid aluminum mounts . . . anyone recommend one versus the other? I'm thinking that the aluminum should have awesome power transfer, but excessive vibration . . . . the polyurethane seems like it would be a good compromise . . . . anyone have any insights? Thanks! __________________ Ross '11 370z Just getting started . . .

06-03-2013, 07:20 PM	#21 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	I have the poly. All the 370Z race teams use the poly. So that made it a easy decision for me. __________________

06-03-2013, 07:25 PM	#22 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	I really like my Z1 transmission mount! Smoother shifting since there is less movement of the tranny. SPOHN likes this. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

06-03-2013, 11:27 PM	#23 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,296 Drives: Tricycle Rep Power: 589151	I have the Z1 Urethane Motor/Trans (7AT) mounts in my car. There is a noticeable difference on how the car plants the power now. The car will not shake its self to death after the install. However, the car does tremble a little bit at idle. I really don't mind because it makes me think that the car is shuddering with power and ready to spring alive. Bottom line - Would I do this again? Hands down, yes. Last edited by gbrettin; 06-03-2013 at 11:29 PM. Reason: Forgot to mention they were Z1 mounts.

03-15-2014, 02:32 PM	#24 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 20	Who makes the most narrow solid engine mount for 370z? I have Z1 semisolid now but need something even narrower? Need to clear some things in current build so need narrowest solid mount I can find. Any ideas on existing mounts? I guess worse case I can have some aluminum custom machined but buying existing set would be nice. Are the Z1 solid mounts more narrow than their semi solid mounts? __________________ Grant

03-15-2014, 07:42 PM	#27 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3390	I've done solid diff mounts, nothing has changed. feels and sounds the same. But in a WRX I did poly motor mounts and cold start up would knock your teeth loose. If it means anything I plan on poly motor mounts again but solid tranny. __________________ 13 370z-

03-16-2014, 04:23 AM	#28 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	yeah full poly Z1's here motor trans and poly diff and yeah it's loud, cant wait to do the subframe and make it even louder yay __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

03-17-2014, 12:05 AM	#29 (permalink)
L33T Z34 Banned Join Date: Jun 2010 Location: Ahnald, MO Age: 47 Posts: 387 Drives: 09 K51 G C Bw/S 6MT Rep Power: 0	Polyurethane mounts always > rubber POS OEM mounts... Why is this even ????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports: 370Z/G37/R35 Urethane Motor Mounts	John@Z1	Drivetrain/Engine	25	10-05-2015 09:41 AM
Anyone running the Z1 Motor Mounts?	ChipsWithDips	Engine & Drivetrain	8	06-25-2012 10:52 AM
[FOR SALE] Solid Motor Mounts	robtrink	Parts for sale (Private Classifieds)	5	08-17-2011 07:39 AM
What kind of motor mounts are u running in your boost z?	EVOHUNTER	Forced Induction	12	07-29-2011 04:01 PM
Transmission + motor question	grimm1	Nissan 370Z General Discussions	28	02-06-2009 05:57 PM