|
Does anyone know if the 350z/G35 differential flanges/stub shafts are the same as the 370z? I'm talking about the flanges that come out of the rear differential and bolt to
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
04-09-2013, 03:19 PM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2012
Location: Mililani, HI
Posts: 1,566
Drives: 2014 Juke Nismo RS
Rep Power: 17   |
Differential flange question (Stub shaft)
Does anyone know if the 350z/G35 differential flanges/stub shafts are the same as the 370z? I'm talking about the flanges that come out of the rear differential and bolt to the axles. I know there is a difference between the base model and the VLSD flanges but just want to 100% confirm they are the same shafts/flanges. Also, if you have the part numbers for them too that would be great.
Thanks
__________________
 R.I.P. 8/01/13 1SlowZ One day I'll have another.... |
|
|
|
04-09-2013, 05:26 PM
|
#2 (permalink) |
|
Banned
Join Date: Jun 2010
Location: Ahnald, MO
Age: 47
Posts: 387
Drives: 09 K51 G C Bw/S 6MT
Rep Power: 0  |
Yes, the axle flanges are different from V35/Z33 to V36/Z34 and also different if open diff or VLSD. Is the diff from the '06 G35 open or VLSD, auto or manual? Are you upgrading the LSD to a mechanical? Search.
axle flanges The "flanges" are what you're asking about. The "axle joint assy" are the rear axles that go to the hub. Last edited by L33T Z34; 04-10-2013 at 05:21 PM. Reason: more details |
|
|
|
|
04-09-2013, 08:50 PM
|
#3 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2012
Location: Mililani, HI
Posts: 1,566
Drives: 2014 Juke Nismo RS
Rep Power: 17 |
I seen your post and a few others but that's what confuses me. Your part numbers show its different part numbers but you say they are the same? Your post is also a little confusing in that thread.
__________________
R.I.P. 8/01/13 1SlowZ One day I'll have another.... Last edited by chrischhorn; 04-10-2013 at 01:47 PM. |
|
|
|
|
04-10-2013, 01:50 PM
|
#4 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2012
Location: Mililani, HI
Posts: 1,566
Drives: 2014 Juke Nismo RS
Rep Power: 17 |
Can anyone 100% confirm that I need to buy both the left and right side flange for the 350z VLSD? The diff is from an 06 G35.
__________________
R.I.P. 8/01/13 1SlowZ One day I'll have another.... |
|
|
|
|
04-10-2013, 07:34 PM
|
#6 (permalink) | |
|
A True Z Fanatic
Join Date: Jan 2012
Location: Mililani, HI
Posts: 1,566
Drives: 2014 Juke Nismo RS
Rep Power: 17 |
Quote:
For now bolt straight in and drive while I do my 4.08 gear swap and quaiife LSD into my current carrier. After that, once I get off this island, I'll use the 3.3 gears for boosting on. Figured $100 for 3.3 gears and VLSD was a good deal for a future investment. I'm sure you're tired of answering my questions but any input on the shafts situation? Need to order them.
__________________
R.I.P. 8/01/13 1SlowZ One day I'll have another.... |
|
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stub axle LSD question | SurfDog | Engine & Drivetrain | 3 | 03-18-2013 09:33 PM |
| Help! Need the differential bearing size/measure for an aftermaket differential | tkramwinkel | Engine & Drivetrain | 1 | 10-02-2012 04:49 AM |
| Rear Differential Question | jpit | Engine & Drivetrain | 8 | 12-23-2011 08:57 AM |
| For Sale : Base Open Differential Complete with stub flanges 10k miles | chuckd05 | Parts for sale (Private Classifieds) | 7 | 08-04-2010 06:31 PM |
| Base 370z Differential Question | PRSMESA24 | Engine & Drivetrain | 20 | 06-06-2009 08:33 PM |
Hybrid Mode
