Differential flange question (Stub shaft)
 

Does anyone know if the 350z/G35 differential flanges/stub shafts are the same as the 370z? I'm talking about the flanges that come out of the rear differential and bolt to the axles. I know there is a difference between the base model and the VLSD flanges but just want to 100% confirm they are the same shafts/flanges. Also, if you have the part numbers for them too that would be great.

Thanks

Yes, the axle flanges are different from V35/Z33 to V36/Z34 and also different if open diff or VLSD. Is the diff from the '06 G35 open or VLSD, auto or manual? Are you upgrading the LSD to a mechanical? Search.
axle flanges
The "flanges" are what you're asking about. The "axle joint assy" are the rear axles that go to the hub.

I seen your post and a few others but that's what confuses me. Your part numbers show its different part numbers but you say they are the same? Your post is also a little confusing in that thread.

Can anyone 100% confirm that I need to buy both the left and right side flange for the 350z VLSD? The diff is from an 06 G35.

What are your plans for the G35 diff?

For now bolt straight in and drive while I do my 4.08 gear swap and quaiife LSD into my current carrier. After that, once I get off this island, I'll use the 3.3 gears for boosting on. Figured $100 for 3.3 gears and VLSD was a good deal for a future investment. I'm sure you're tired of answering my questions but any input on the shafts situation? Need to order them.