Forged Performance: Project 370Z Race Car Build!!

Ryan@Forged · 07-24-2009, 08:40 AM

Quote:

Originally Posted by FuszNissan

I can't wait for the install of aftermarket goodies!!!

Shouldn't be too much longer

The cage will probably be the 1st thing to actually go in the car. After that we will be adding some nice aftermarket parts

Sharif@Forged · 07-24-2009, 03:43 PM

The entire car is now empty of the big and small stuff.

Now begins the process of using dry ice to break away all of the heavy sound deadening material. We will probably pull another 40-50lbs of sounds deadening out of the car alone.

ChrisSlicks · 07-25-2009, 02:44 PM

I like that you are going all out on this build, should be very nice. I'll be following intently.

tbonesteak · 07-26-2009, 01:39 AM

im starvinggg!!! moarrr pleaseeee!!!!!

Ryan@Forged · 07-27-2009, 09:09 AM

Still working on getting every last bit of sound deadening out of the car

travisjb · 07-27-2009, 11:12 AM

Ryan and Sharif, I'm going to do the same... any advice / weblinks on removing sound deadening material?

Sharif@Forged · 07-27-2009, 12:50 PM

Quote:

Originally Posted by travisjb

Ryan and Sharif, I'm going to do the same... any advice / weblinks on removing sound deadening material?

Ryan was able to locate a place that has dry ice pellets. This is DEFINATELY way better than the big blocks. I would do a local search in your area for an ice distributor...I am sure they will have it.

Just let the dry ice sit on the material for 10 mins or so, and start chipping away with a little hammer and scraper.

What's left of the adhesive, can then we removed with a generous application of 3M adhesive remover.

Oh, and all the glass is coming out today

KingDavid · 07-27-2009, 01:46 PM

Quote:

Originally Posted by Sharif@Forged

Ryan was able to locate a place that has dry ice pellets. This is DEFINATELY way better than the big blocks. I would do a local search in your area for an ice distributor...I am sure they will have it.

Just let the dry ice sit on the material for 10 mins or so, and start chipping away with a little hammer and scraper.

What's left of the adhesive, can then we removed with a generous application of 3M adhesive remover.

Oh, and all the glass is coming out today

Will this car see a 1/4 mile at all just for kicks?

Pleeeeeeeeeeeeeeeeeeeeeeeeeeeease?!?!?!?!?!?!?!?!? ????

Sharif@Forged · 07-27-2009, 03:21 PM

Quote:

Originally Posted by KingDavid

Will this car see a 1/4 mile at all just for kicks?

Pleeeeeeeeeeeeeeeeeeeeeeeeeeeease?!?!?!?!?!?!?!?!? ????

I think that can be arranged. Might be interesting!

Actually, glass is coming out on Wed, and then will be sent off for lexan.

xiven · 07-27-2009, 03:24 PM

Quote:

Originally Posted by KingDavid

Will this car see a 1/4 mile at all just for kicks?

Pleeeeeeeeeeeeeeeeeeeeeeeeeeeease?!?!?!?!?!?!?!?!? ????

This would be awesome to see. Too bad you can't mess with people on a track night and be a sleeper but i'm sure from the sound of the car and the cage in it...it would be a dead giveaway that this is a full on race car.

travisjb · 07-27-2009, 03:30 PM

More details on glass please... front windshield will be stock glass or lexan? if lexan, will you be able to replicate the curves? for side windows, are you going to leave those open and net them or put in lexan? if lexan on sides, will you make it so they pop on / off easily?

Mike · 07-27-2009, 07:13 PM

make the lexan available for purchase!!!!!

Sharif@Forged · 07-27-2009, 08:22 PM

Quote:

Originally Posted by travisjb

More details on glass please... front windshield will be stock glass or lexan? if lexan, will you be able to replicate the curves? for side windows, are you going to leave those open and net them or put in lexan? if lexan on sides, will you make it so they pop on / off easily?

It will be cut to the OEM shape, and we'll make a custom frame to attach it. Pretty standard stuff. All the glass is being removed from the car, so no OEM glass will remain. You can run Lexan on the street, but it's not nearly as resistant to scratching and scuffing, so not all that practical, IMHO. For the front door, we'll run just a small piece of lexan at the front of the door, and the rest will remain open. A window net, and head restraint will be installed for the driver. At this point, I THINK we are going to keep the OEM steering column, and pedals/cylinders, but that may change. The small corner glass will be removed, and replaced with air ducts, which will cool the diff.

It will be a lot more fun, with I can post pictures of the work and fabrication we'll be doing, instead of just typing about it. Thanks for being patient, and I am happy to answer any other questions you all have.

travisjb · 07-27-2009, 08:44 PM

Sharif, I'd like to replicate as much as possible of your build. If you're willing to build two sets of any of the parts you fab, I'm standing by to purchase. E.g., lexan pieces, ducting for diff...

Re the pedals, the accelerator pedal assembly made by Bosch seems cheap, I think we'd be better off replacing the whole assembly at some point. Dead pedal needs to be reconstructed too. Brake and clutch seem fine to me + clutch has a sensor at the bottom of pedal stroke to be aware of.

Have you started thinking about aero at all? Also, what are your plans to cool front brakes? Going with the new brembo kit or ap racing kit?

Sharif@Forged · 07-29-2009, 02:17 PM

Quote:

Originally Posted by travisjb

Sharif, I'd like to replicate as much as possible of your build. If you're willing to build two sets of any of the parts you fab, I'm standing by to purchase. E.g., lexan pieces, ducting for diff...

Re the pedals, the accelerator pedal assembly made by Bosch seems cheap, I think we'd be better off replacing the whole assembly at some point. Dead pedal needs to be reconstructed too. Brake and clutch seem fine to me + clutch has a sensor at the bottom of pedal stroke to be aware of.

Have you started thinking about aero at all? Also, what are your plans to cool front brakes? Going with the new brembo kit or ap racing kit?

Absolutely. Anything we can replicate or produce is open to the public. I will keep everyone advised as this happens.

07-24-2009, 03:43 PM	#77 (permalink)
Sharif@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta, GA Posts: 840 Drives: 2009 GT-R, 2010 370Z Rep Power: 18	The entire car is now empty of the big and small stuff. Now begins the process of using dry ice to break away all of the heavy sound deadening material. We will probably pull another 40-50lbs of sounds deadening out of the car alone. __________________ Sharif@Forgedperformance.com General Manager/Certified Tuner/NASA-PCA-BMWCAA Instructor JRZ RS1's Available NOW...PM me Cobb ProTuner, Uprev ECU Flash, FCON Vpro, Haltech, Motec Certified

07-27-2009, 11:12 AM	#81 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Ryan and Sharif, I'm going to do the same... any advice / weblinks on removing sound deadening material? __________________ 2009 370Z #104 For Sale

07-27-2009, 03:30 PM	#86 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	More details on glass please... front windshield will be stock glass or lexan? if lexan, will you be able to replicate the curves? for side windows, are you going to leave those open and net them or put in lexan? if lexan on sides, will you make it so they pop on / off easily? __________________ 2009 370Z #104 For Sale

07-27-2009, 07:13 PM	#87 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	make the lexan available for purchase!!!!! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-27-2009, 08:44 PM	#89 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Sharif, I'd like to replicate as much as possible of your build. If you're willing to build two sets of any of the parts you fab, I'm standing by to purchase. E.g., lexan pieces, ducting for diff... Re the pedals, the accelerator pedal assembly made by Bosch seems cheap, I think we'd be better off replacing the whole assembly at some point. Dead pedal needs to be reconstructed too. Brake and clutch seem fine to me + clutch has a sensor at the bottom of pedal stroke to be aware of. Have you started thinking about aero at all? Also, what are your plans to cool front brakes? Going with the new brembo kit or ap racing kit? __________________ 2009 370Z #104 For Sale

07-25-2009, 02:44 PM	#78 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	I like that you are going all out on this build, should be very nice. I'll be following intently.

07-26-2009, 01:39 AM	#79 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	im starvinggg!!! moarrr pleaseeee!!!!!

07-27-2009, 09:09 AM	#80 (permalink)
Ryan@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta/Kennesaw, GA Posts: 1,527 Drives: Evo 8/Evo 9 MR/GTR Rep Power: 0	Still working on getting every last bit of sound deadening out of the car

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: 370Z Volk Wheel fitments are coming now!!!	Sharif@Forged	Wheels & Tires	121	06-19-2009 09:38 AM
Welcome Forged Performance	AK370Z	Forged Performance	29	04-23-2009 09:43 AM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 03:28 PM
Follow the build of our Nissan GT-R Race-car	Kyle@STILLEN	STILLEN	4	02-25-2009 12:20 PM