Forged Performance: Project 370Z Race Car Build!!

nightfire · 07-23-2009, 08:59 AM

more pics!

Reality · 07-23-2009, 09:01 AM

Sharif and FP FTMFW!

Ryan@Forged · 07-23-2009, 09:26 AM

I'll try and get some updated pictures for you guys today. We removed a nice bit yesterday as well. Dash and airbags are out, AC/Radiator is out, brake kit is completely off, etc.

Sharif@Forged · 07-23-2009, 10:52 AM

Made quite a bit more progress, and the pile is getting bigger.

We're about to pull off the interior crash bar, and pull out the heater core/blower, and all the other uneeded items from under there. THere is a quite a bit of weight locked up under the dashboard.

FuszNissan · 07-23-2009, 10:56 AM

I am drooling over this. Keep up the nice pics and updates!
+ Rep

RCZ · 07-23-2009, 11:07 AM

This right here is why I got leather seats and navigation.You either have a race car or you dont

Awesome progress guys, keep it up. Cant wait for stuff to start going on and not off.

Oh yeah SSQ is right. Pic request of Sandy with the stripped down Z !

wstar · 07-23-2009, 11:43 AM

Quote:

Originally Posted by RCZ

Oh yeah SSQ is right. Pic request of Sandy with the stripped down Z !

Don't you mean pics of the stripped down Sandy with the Z? Errr..

CCCLXXZ · 07-23-2009, 01:52 PM

Can you PPPPPPLEASE measure the inner diameter of the stock cat flange on the y-pipe side. I have asked many but to no avail I am still searching for the answer. MM or inches would be great!!!

Also if they are for sale PM me a price on what you would like for them.

Thanks!

Nick

wstar · 07-23-2009, 02:06 PM

Quote:

Originally Posted by CCCLXXZ

Can you PPPPPPLEASE measure the inner diameter of the stock cat flange on the y-pipe side. I have asked many but to no avail I am still searching for the answer. MM or inches would be great!!!

Nick

I don't have my stock cats here, but I do have the stock Y-pipe here. My calipers show 42.5mm ID on the Y-pipe flanges on the side where they mate with the stock cats, I would hope/assume the cats are the same.

CCCLXXZ · 07-23-2009, 02:48 PM

I am pretty sure they aren't the same!!! it should be closer to 2" or 50.8mm I believe... I haven't had the time to take off my y-pipe to check.

Thanks

Sharif@Forged · 07-23-2009, 08:11 PM

Quote:

Originally Posted by wstar

Don't you mean pics of the stripped down Sandy with the Z? Errr..

We'll see if that can be arranged.

CBRich · 07-23-2009, 08:41 PM

Plan on driving in the rain? Seems like the whole car is stripped but the two stalks.

Ryan@Forged · 07-23-2009, 11:14 PM

We still have a good bit of weight to lose before we are done stripping the car. It's amazing how much unseen weight is on the car. We still have yet to touch the sound deadening which will add up to a pretty good amount of weight. The blower is still in the car as well, but should be the next part to come off.

tbonesteak · 07-24-2009, 01:09 AM

OMGGG MOARRRRRRRR!!!

On a side note, it's good to see how many holes there are on the various panels that does not affect structural rigidity. Shows that nissan engineers focused on lowering weight. I love that!

FuszNissan · 07-24-2009, 01:11 AM

I can't wait for the install of aftermarket goodies!!!

07-23-2009, 09:01 AM	#62 (permalink)
Reality Enthusiast Member Join Date: Dec 2008 Location: Toronto, Canada Posts: 290 Drives: '06 PPW GT Rep Power: 17	Sharif and FP FTMFW! __________________ //2005 35th SB #81 [tyra] SOLD //2006 GT PPW SOLD

07-23-2009, 10:52 AM	#64 (permalink)
Sharif@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta, GA Posts: 840 Drives: 2009 GT-R, 2010 370Z Rep Power: 18	Made quite a bit more progress, and the pile is getting bigger. We're about to pull off the interior crash bar, and pull out the heater core/blower, and all the other uneeded items from under there. THere is a quite a bit of weight locked up under the dashboard. __________________ Sharif@Forgedperformance.com General Manager/Certified Tuner/NASA-PCA-BMWCAA Instructor JRZ RS1's Available NOW...PM me Cobb ProTuner, Uprev ECU Flash, FCON Vpro, Haltech, Motec Certified Last edited by Sharif@Forged; 07-23-2009 at 10:56 AM.

07-23-2009, 10:56 AM	#65 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	I am drooling over this. Keep up the nice pics and updates! + Rep __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

07-24-2009, 01:11 AM	#75 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	I can't wait for the install of aftermarket goodies!!! __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: 370Z Volk Wheel fitments are coming now!!!	Sharif@Forged	Wheels & Tires	121	06-19-2009 09:38 AM
Welcome Forged Performance	AK370Z	Forged Performance	29	04-23-2009 09:43 AM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 03:28 PM
Follow the build of our Nissan GT-R Race-car	Kyle@STILLEN	STILLEN	4	02-25-2009 12:20 PM

07-23-2009, 08:59 AM	#61 (permalink)
nightfire Base Member Join Date: Apr 2009 Location: USA Posts: 178 Drives: Mk IV Jetta turbo Rep Power: 267	more pics!

07-23-2009, 09:26 AM	#63 (permalink)
Ryan@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta/Kennesaw, GA Posts: 1,527 Drives: Evo 8/Evo 9 MR/GTR Rep Power: 0	I'll try and get some updated pictures for you guys today. We removed a nice bit yesterday as well. Dash and airbags are out, AC/Radiator is out, brake kit is completely off, etc.

07-23-2009, 11:07 AM	#66 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	This right here is why I got leather seats and navigation.You either have a race car or you dont Awesome progress guys, keep it up. Cant wait for stuff to start going on and not off. Oh yeah SSQ is right. Pic request of Sandy with the stripped down Z !

07-23-2009, 01:52 PM	#68 (permalink)
CCCLXXZ Base Member Join Date: May 2009 Location: Chicago Suburbs Posts: 164 Drives: T/S/MB/6 370z Rep Power: 401	Can you PPPPPPLEASE measure the inner diameter of the stock cat flange on the y-pipe side. I have asked many but to no avail I am still searching for the answer. MM or inches would be great!!! Also if they are for sale PM me a price on what you would like for them. Thanks! Nick

07-23-2009, 02:48 PM	#70 (permalink)
CCCLXXZ Base Member Join Date: May 2009 Location: Chicago Suburbs Posts: 164 Drives: T/S/MB/6 370z Rep Power: 401	I am pretty sure they aren't the same!!! it should be closer to 2" or 50.8mm I believe... I haven't had the time to take off my y-pipe to check. Thanks

07-23-2009, 08:41 PM	#72 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Plan on driving in the rain? Seems like the whole car is stripped but the two stalks.

07-23-2009, 11:14 PM	#73 (permalink)
Ryan@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta/Kennesaw, GA Posts: 1,527 Drives: Evo 8/Evo 9 MR/GTR Rep Power: 0	We still have a good bit of weight to lose before we are done stripping the car. It's amazing how much unseen weight is on the car. We still have yet to touch the sound deadening which will add up to a pretty good amount of weight. The blower is still in the car as well, but should be the next part to come off.

07-24-2009, 01:09 AM	#74 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	OMGGG MOARRRRRRRR!!! On a side note, it's good to see how many holes there are on the various panels that does not affect structural rigidity. Shows that nissan engineers focused on lowering weight. I love that!