Forged Performance: Project 370Z Race Car Build!!

t-ray · 07-21-2009, 01:22 PM

^^ Just curious - how did you arrive at that figure?

** Edit ** Just noticed the corner weights in the pictures. Duh.

theDreamer · 07-21-2009, 01:39 PM

In for more.

rednek01 · 07-21-2009, 01:39 PM

Quote:

Originally Posted by theDreamer

In for more.

in for the more too

Ryan@Forged · 07-21-2009, 01:42 PM

Quote:

Originally Posted by travisjb

if i did the math right, you guys are now at 57.6% weight to front... hopefully you find some ways to shift more weight towards the rear and continue to lighten the front

removing the AC system along with a ton of sound deadening,insulation, and air bags should help even it out a good bit. All of those will come off of the front.

It's a bit too early to worry about that though, the roll cage hasn't even been added.

shabarivas · 07-21-2009, 02:21 PM

Come on - sell me that middle piece door thingy

along w/ the trim for the cubby itself ... me has projects in the works

Ryan@Forged · 07-21-2009, 02:24 PM

Quote:

Originally Posted by shabarivas

Come on - sell me that middle piece door thingy

along w/ the trim for the cubby itself ... me has projects in the works

We may, we haven't figured out pricing for everything.

B1nks · 07-21-2009, 02:33 PM

what exhaust yall going with ?

ssqpolo · 07-21-2009, 03:08 PM

I very excite!

Ryan@Forged · 07-21-2009, 03:09 PM

Quote:

Originally Posted by B1nks

what exhaust yall going with ?

Custom

nightfire · 07-21-2009, 03:16 PM

Quote:

Originally Posted by Ryan@Forged

Custom

oooooo

Sharif@Forged · 07-21-2009, 04:23 PM

Quote:

Originally Posted by Ryan@Forged

Custom

It shall be unlike anything you have seen before.

t-ray · 07-21-2009, 04:30 PM

Quote:

Originally Posted by Sharif@Forged

It shall be unlike anything you have seen before.

Exhaust manifolds dumped through the hood? Side exit exhaust?

Sharif@Forged · 07-21-2009, 05:06 PM

When we are done, the balance of the car should remain fairly close. Once the cage, diff coolers, and all the weight comes out under the dashboard and engine bay, she should be in good shape.

At that point, the overall chassis balance will be fine-tuned via shock, tire, and alignment settings.
This is actually our 3rd full blown race car we've built, so I expect it to be our best one yet.

Sharif@Forged · 07-21-2009, 05:07 PM

Quote:

Originally Posted by t-ray

Exhaust manifolds dumped through the hood? Side exit exhaust?

License plate location.

Will also have V-band quick release silencers, for tracks with noise restrictions.

Togo · 07-21-2009, 05:22 PM

I can't wait to see how this turns out!

07-21-2009, 01:22 PM	#31 (permalink)
t-ray Base Member Join Date: Apr 2009 Location: bham al Posts: 91 Drives: 05 g sedan 6mt Rep Power: 16	^^ Just curious - how did you arrive at that figure? Edit Just noticed the corner weights in the pictures. Duh. Last edited by t-ray; 07-21-2009 at 02:27 PM.

07-21-2009, 01:39 PM	#32 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	In for more. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

07-21-2009, 05:06 PM	#43 (permalink)
Sharif@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta, GA Posts: 840 Drives: 2009 GT-R, 2010 370Z Rep Power: 18	When we are done, the balance of the car should remain fairly close. Once the cage, diff coolers, and all the weight comes out under the dashboard and engine bay, she should be in good shape. At that point, the overall chassis balance will be fine-tuned via shock, tire, and alignment settings. This is actually our 3rd full blown race car we've built, so I expect it to be our best one yet. __________________ Sharif@Forgedperformance.com General Manager/Certified Tuner/NASA-PCA-BMWCAA Instructor JRZ RS1's Available NOW...PM me Cobb ProTuner, Uprev ECU Flash, FCON Vpro, Haltech, Motec Certified

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: 370Z Volk Wheel fitments are coming now!!!	Sharif@Forged	Wheels & Tires	121	06-19-2009 09:38 AM
Welcome Forged Performance	AK370Z	Forged Performance	29	04-23-2009 09:43 AM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 03:28 PM
Follow the build of our Nissan GT-R Race-car	Kyle@STILLEN	STILLEN	4	02-25-2009 12:20 PM

07-21-2009, 02:21 PM	#35 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	Come on - sell me that middle piece door thingy along w/ the trim for the cubby itself ... me has projects in the works

07-21-2009, 02:33 PM	#37 (permalink)
B1nks Track Member Join Date: Apr 2009 Location: Houston,Tx Posts: 721 Drives: 2009 370Z Base 6MT Rep Power: 507	what exhaust yall going with ?

07-21-2009, 03:08 PM	#38 (permalink)
ssqpolo Track Member Join Date: Jan 2009 Location: Florida Posts: 882 Drives: '12 Black Nismo Rep Power: 267	I very excite!

07-21-2009, 05:22 PM	#45 (permalink)
Togo A True Z Fanatic Join Date: May 2009 Location: E. Northport, NY Posts: 7,597 Drives: Stuff Rep Power: 657	I can't wait to see how this turns out!