MAF Intake from Z1...
 

Having trouble installing the passenger side MAF hose. Any tips? The black hose from manifold is not lining up....Thanks...

Pictures to help explain what you're talking about? There are a lot of black hoses in the engine bay...

http://http://www.the370z.com/attach...1&d=1364850531

Pic on left is the passenger side - hose crimped
Pic on right is driver side - connection is below not seen in pic.

http://http://www.the370z.com/attach...1&d=1364852227

http://http://www.the370z.com/attach...1&d=1364852227

Pic on left - passenger side crimped
Pic on left - driver side parts off old tube

http://http://www.the370z.com/attach...1&d=1364852792

Pic is from drivers side showing the attatchment below MAF tube...

looks like the hoses are on backwards somehow the z1 emblem should show upwards

They are on the upside...need to see the Z emblem when looking at the engine bay...may need a custom fit for the side fit

You shouldn't be removing the black plastic harmonics boxes I believe... Unless you have their PCV kit too...

So you essentially are just removing/replacing the Accordion section, nothing else.

i install mine without the silver thing on the passenger side

So is it ok to remove the silver thing from the silicone tubes? They could/would fit then right?

Thanks...

No? That's the connector between the two pipes. :facepalm:

That's the only way I can get everything fit together. No problem so far, but I only have about 500 miles with it

The silver connector and the original fittings are the same size, so they will not fit together...

:facepalm: