SES after G3

SPOHN · 02-07-2013, 09:23 PM

If I remember right you unplug the Maf. Start car for 10 secs. Turn off. Should threw another code. Delete codes. Plug Maf back in run car for 10 minutes. But I'll have to recheck the procedures to be sure.

But I have also just removed all EVAP equipment. Maybe it's related maybe not.

roy'sz · 02-07-2013, 09:35 PM

I thought thats how u did that. Did it this afternoon and it came back on again.

SPOHN · 02-07-2013, 09:38 PM

Right now I'm not worried about it so much. I keep deleting it for now. I have others to worry about with a track day next week. I'll take it to my tuner after.

gomer_110 · 02-07-2013, 09:38 PM

Quote:

Originally Posted by SPOHN

If I remember right you unplug the Maf. Start car for 10 secs. Turn off. Should threw another code. Delete codes. Plug Maf back in run car for 10 minutes. But I'll have to recheck the procedures to be sure.

But I have also just removed all EVAP equipment. Maybe it's related maybe not.

Yeah just found it.

Quote:

1. Start engine and warm it up to normal operating temperature.
2. Turn ignition switch OFF.
3. Disconnect mass air flow sensor (bank 1) harness connector.
4. Restart engine and let it idle for at least 5 seconds.
5. Stop engine and reconnect mass air flow sensor (bank 1) harness connector.
6. Select Service $03 with GST. Make sure DTC P0102 is detected.
7. Select Service $04 with GST to erase the DTC P0102.

roy'sz · 02-07-2013, 09:51 PM

When I did it I disconnected both and it didn't even run for 5 sec. So bank 1 is passenger side correct? I also happened to do this when it was cold....didn't remember that part bout being warmed up.

roy'sz · 02-07-2013, 09:52 PM

Quote:

Originally Posted by gomer_110

Yeah just found it.

Would this have any relationship to installing a cold air intake?

rhd · 02-07-2013, 09:52 PM

Service Manual: P2A00

roy'sz · 02-08-2013, 12:16 AM

Thats a lot of info for a weekend mek a nic like myself. Will try what gomer said...if not since its a/f related and I never touched the afr sensor then maybe I will let the stealershit have at it.

roy'sz · 02-09-2013, 05:06 PM

UPDATE: Today I decided to troubleshoot. I called Z1 and talked to Spencer. I told him what is going on and he agreed that it mostlikely seems like a intake problem. He suggested cleaning the MAF. Also suggested spraying down the car with some sort of cleaner to see if there is a vaccum leak. I sprayed and really didn't find anything wrong. I did however notice that the pcv hose from the baffle box to the intake was loose on the driverside so i replaced them with some hose clamps. I cleared the code and went for a quick 30 mile drive. 15 miles in and it showed pending falult P2a00. So on the way home I youtubed a video in reguards to cleaning maf's and did that when I got home. Before going on the drive I decided to make the car re learn the a/f ratio by attemtping gomers dug up instructions on relearning a/f ratios. Went on the drive and 30 miles with no P2a00. This might solve it. Im thinking (still learning about this car, all pointers are appreciated from the penut gallery) that due to having a possible dirty maf sensor the car will lean/rich out to correct the air/fuel aratio and it happens to lean/rich out of spec due to a dirty or false reading from maf sensor?

SPOHN · 02-09-2013, 06:43 PM

Interesting. But I wouldn't put a lot of fate in just thirty miles yet. But cleaning the MAFs might be a common maintence at regular intervals sooner than normal. Especially with after market intakes.

roy'sz · 02-09-2013, 06:47 PM

I agree, more time will tell if the ses comes back. Its just that after 15 miles when I reset it initially it came back on, and after 30 it didn't. Time will tell, if this doesn't work its back to the drawing board.

SPOHN · 02-09-2013, 06:52 PM

I'm going to buy some MAF cleaner tomorrow. I've done all sorts of maintence this weekend for my track day next weekend, might as well do this cheap fix.

roy'sz · 02-09-2013, 08:25 PM

Im interestrd to see if it helps. I did notice that my car was accellerating smoother after cleaning the maf's. Not sure if its a solid fix or not...will know Monday.

SPOHN · 02-09-2013, 09:01 PM

Mine seems to run fine but startup acts weird.

roy'sz · 02-09-2013, 09:04 PM

Rough idle?

02-07-2013, 09:23 PM	#16 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	If I remember right you unplug the Maf. Start car for 10 secs. Turn off. Should threw another code. Delete codes. Plug Maf back in run car for 10 minutes. But I'll have to recheck the procedures to be sure. But I have also just removed all EVAP equipment. Maybe it's related maybe not. __________________ Last edited by SPOHN; 02-07-2013 at 09:29 PM.

02-07-2013, 09:35 PM	#17 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	I thought thats how u did that. Did it this afternoon and it came back on again. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

02-07-2013, 09:38 PM	#18 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Right now I'm not worried about it so much. I keep deleting it for now. I have others to worry about with a track day next week. I'll take it to my tuner after. __________________

02-07-2013, 09:51 PM	#20 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	When I did it I disconnected both and it didn't even run for 5 sec. So bank 1 is passenger side correct? I also happened to do this when it was cold....didn't remember that part bout being warmed up. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

02-07-2013, 09:52 PM	#22 (permalink)
rhd Enthusiast Member Join Date: Feb 2012 Location: In the shop Posts: 281 Drives: Women Crazy Rep Power: 13	Service Manual: P2A00 cheshirecat likes this.

02-08-2013, 12:16 AM	#23 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Thats a lot of info for a weekend mek a nic like myself. Will try what gomer said...if not since its a/f related and I never touched the afr sensor then maybe I will let the stealershit have at it. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

02-09-2013, 05:06 PM	#24 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	*UPDATE:* Today I decided to troubleshoot. I called Z1 and talked to Spencer. I told him what is going on and he agreed that it mostlikely seems like a intake problem. He suggested cleaning the MAF. Also suggested spraying down the car with some sort of cleaner to see if there is a vaccum leak. I sprayed and really didn't find anything wrong. I did however notice that the pcv hose from the baffle box to the intake was loose on the driverside so i replaced them with some hose clamps. I cleared the code and went for a quick 30 mile drive. 15 miles in and it showed pending falult P2a00. So on the way home I youtubed a video in reguards to cleaning maf's and did that when I got home. Before going on the drive I decided to make the car re learn the a/f ratio by attemtping gomers dug up instructions on relearning a/f ratios. Went on the drive and 30 miles with no P2a00. This might solve it. Im thinking (still learning about this car, all pointers are appreciated from the penut gallery) that due to having a possible dirty maf sensor the car will lean/rich out to correct the air/fuel aratio and it happens to lean/rich out of spec due to a dirty or false reading from maf sensor? __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

02-09-2013, 06:43 PM	#25 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Interesting. But I wouldn't put a lot of fate in just thirty miles yet. But cleaning the MAFs might be a common maintence at regular intervals sooner than normal. Especially with after market intakes. __________________

02-09-2013, 06:47 PM	#26 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	I agree, more time will tell if the ses comes back. Its just that after 15 miles when I reset it initially it came back on, and after 30 it didn't. Time will tell, if this doesn't work its back to the drawing board. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

02-09-2013, 06:52 PM	#27 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I'm going to buy some MAF cleaner tomorrow. I've done all sorts of maintence this weekend for my track day next weekend, might as well do this cheap fix. __________________

02-09-2013, 08:25 PM	#28 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Im interestrd to see if it helps. I did notice that my car was accellerating smoother after cleaning the maf's. Not sure if its a solid fix or not...will know Monday. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

02-09-2013, 09:01 PM	#29 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Mine seems to run fine but startup acts weird. __________________

02-09-2013, 09:04 PM	#30 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Rough idle? __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-