"Chirping" on ignition

dmhenderson · 01-03-2013, 01:03 PM

Just noticed today but when I start the engine there's a slight "chirp" that comes from the engine. No idea what's causing it or if I should even be concerned. Ignore it?

Edit: Chirp is there on multiple startup attempts (consistently).

dP3NGU1N · 01-03-2013, 01:11 PM

Maybe a belt? Just speculating. I hope someone with more technical knowledge than me chimes in.

dmhenderson · 01-03-2013, 01:16 PM

The car is less than a year old. I would hope it's not a belt. It may work itself out - it has been awfully cold here recently so that could be a contributing factor but I tend to worry so...

1st · 01-03-2013, 01:19 PM

Quote:

Originally Posted by dP3NGU1N

Maybe a belt? Just speculating. I hope someone with more technical knowledge than me chimes in.

Pully. I think thats what he meant. Open the hood while on if its a pully you will hear it do to the bearing.

dmhenderson · 01-03-2013, 01:20 PM

So "it's probably nothing" then?

SouthArk370Z · 01-03-2013, 01:26 PM

Does it happen when you start with the engine warm?
If not, I think dmhenderson is on the right track - belt slippage when the belt is cold. If it is a belt squeal, the belt(s) looks good, and it's only a chirp when cold, I wouldn't worry unless it gets worse.

Someone listening to the engine compartment while you crank may be able to tell where the noise is coming from.

dmhenderson · 01-03-2013, 01:43 PM

Yeah only noticed today when parked outside at work and starting it to go to lunch. Chirped on multiple ignition attempts and again when leaving lunch but I'm thinking you're right, it's because it's freaking cold outside.

SouthArk370Z · 01-03-2013, 02:17 PM

Quote:

Originally Posted by SouthArk370Z

.... If it is a belt squeal, ...

I don't think that SomeGuyOnTheInternet doing a remote diagnosis is any kind of proof that it's just a cold belt and nothing to worry about.

It could be many things, including pulleys, bearings, pumps, &c. I recommend getting someone to listen while you crank and verify that it is just the belt. If it is confirmed to be the belt, make sure the belt is in good condition.

dmhenderson · 01-03-2013, 03:04 PM

I know what a bearing squeal sounds like and this isn't it - plus unlikely it'd only do that for a second on startup. If it persists or get worse, I'll definitely get it looked at.

dmhenderson · 01-03-2013, 09:09 PM

Belts look fine. It's not a bearing and doesn't make the noise once the car is warmed up. Case closed

01-03-2013, 01:03 PM	#1 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	"Chirping" on ignition Just noticed today but when I start the engine there's a slight "chirp" that comes from the engine. No idea what's causing it or if I should even be concerned. Ignore it? Edit: Chirp is there on multiple startup attempts (consistently). __________________ Last edited by dmhenderson; 01-03-2013 at 09:10 PM.

01-03-2013, 01:16 PM	#3 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	The car is less than a year old. I would hope it's not a belt. It may work itself out - it has been awfully cold here recently so that could be a contributing factor but I tend to worry so... __________________

01-03-2013, 01:20 PM	#5 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	So "it's probably nothing" then? __________________

01-03-2013, 01:26 PM	#6 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Does it happen when you start with the engine warm? If not, I think dmhenderson is on the right track - belt slippage when the belt is cold. If it is a belt squeal, the belt(s) looks good, and it's only a chirp when cold, I wouldn't worry unless it gets worse. Someone listening to the engine compartment while you crank may be able to tell where the noise is coming from. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

01-03-2013, 01:43 PM	#7 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Yeah only noticed today when parked outside at work and starting it to go to lunch. Chirped on multiple ignition attempts and again when leaving lunch but I'm thinking you're right, it's because it's freaking cold outside. __________________

01-03-2013, 01:11 PM	#2 (permalink)
dP3NGU1N A True Z Fanatic Join Date: Feb 2011 Location: Irvine Posts: 1,682 Drives: 13 PW sport 6mt Rep Power: 18	Maybe a belt? Just speculating. I hope someone with more technical knowledge than me chimes in.

01-03-2013, 03:04 PM	#9 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	I know what a bearing squeal sounds like and this isn't it - plus unlikely it'd only do that for a second on startup. If it persists or get worse, I'll definitely get it looked at. __________________

01-03-2013, 09:09 PM	#10 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Belts look fine. It's not a bearing and doesn't make the noise once the car is warmed up. Case closed __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ignition "Hot"	pfdaxe	Nissan 370Z General Discussions	8	08-31-2012 03:33 PM
When did "Z" replace "Nissan" logo on key fobs?	AlphaSnacks	Nissan 370Z General Discussions	23	03-27-2011 10:47 PM
I guess this will be my "build thread" or..."journal?"... atx370z	atx370z	Member's 370Z Gallery	15	09-15-2010 12:10 PM
"Dancing with the Dealer" with the 40th - hope to be in the "New Owner" section soon	optiontrader	New Forum Member	8	08-03-2010 11:37 PM
"Warning" Carbon Fiber Z emblems "DO NOT FIT"	NXTAZEE	Exterior & Interior	2	12-20-2009 03:49 AM