You're changing the gears in the wrong direction if you're going turbo down the line. You would end up making first and second gear completely useless.
|
|
LinkBack | Thread Tools | Display Modes |
07-26-2013, 08:33 AM | #61 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29538 |
You're changing the gears in the wrong direction if you're going turbo down the line. You would end up making first and second gear completely useless.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
07-27-2013, 06:30 PM | #62 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251 |
yeah the factory manual rear gear would be about as high as you would want to go for a turbo car. the more low and midrange power you have the smaller gears are are better. i'm going to have way too much low end so i want the automatic ratio. if you are going single turbo then a slightly taller gear doesn't hurt for getting off the line.
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
08-24-2013, 05:00 PM | #63 (permalink) |
Base Member
Join Date: Aug 2013
Location: tulsa
Posts: 19
Drives: 06 g35
Rep Power: 12 |
Sorry for bringing this thread up from a while ago but just a few questions.
Will this mess anything up in the long run, does it put more stress on the car? Can you keep everything else stock and simply just do a 4.08 gear swap, rear axle will be completely fine no matter how many times you floor it from a dig? and what is this "micro polished" how much is it and what exactly does it do. Probably obvious, but just making sure. Thanks Don't own a Z, or any car as of now, but planning on getting one in March and I want this to be one of my first mods. Thanks again. |
10-15-2013, 09:02 PM | #64 (permalink) |
Track Member
Join Date: Jun 2012
Location: Idaho
Posts: 892
Drives: 2012 6-SPEED 3.7L Z
Rep Power: 14 |
Thanks for the review.
Seb's putting in a Quaife LSD, 4.08 gears, whiteline diff bushings and the same fluid you've got, this monday EDIT: I've got a manual gearbox though, but I like shifting
__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough. Last edited by binary0x01; 10-16-2013 at 12:23 AM. |
10-16-2013, 12:22 AM | #67 (permalink) | ||
Track Member
Join Date: Jun 2012
Location: Idaho
Posts: 892
Drives: 2012 6-SPEED 3.7L Z
Rep Power: 14 |
Quote:
Quote:
__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough. |
||
10-17-2013, 09:37 PM | #69 (permalink) | |
Track Member
Join Date: Jun 2012
Location: Idaho
Posts: 892
Drives: 2012 6-SPEED 3.7L Z
Rep Power: 14 |
Quote:
I wanna do the tires and the SpecialtyZ clutch and flywheel combo install. After that I'll prolly do front and rear camber arms and toe bolts and all that stuff just to finish it off. But then again, there's always room for seats and a proper harness bar and rear spoiler lol... stuff keeps on adding up!!
__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough. |
|
10-19-2013, 11:53 PM | #70 (permalink) |
Track Member
Join Date: Aug 2012
Location: Albuquerque NM
Posts: 577
Drives: 2010 Roadster 7AT
Rep Power: 307 |
I am wanting to do this Mod with the stock 6MT 3.69 gears.
My 7AT is a non-sport and need to know what parts are needed if I use a sport version pumpkin with stock LSD. If anyone can chime in
__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar |
10-20-2013, 02:13 AM | #71 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251 |
I did that for critical, if you get a 370z manual sport pumpkinyou can just bolt it to your car no extra parts required. Just make sure you get the pumpkin completely assembled with shafts in it. And don't get one from a g37 sedan different flange on those.
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
10-21-2013, 10:16 PM | #72 (permalink) | |
Track Member
Join Date: Aug 2012
Location: Albuquerque NM
Posts: 577
Drives: 2010 Roadster 7AT
Rep Power: 307 |
Quote:
I would like to find one online
__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar |
|
10-22-2013, 12:08 AM | #73 (permalink) |
Track Member
Join Date: Aug 2012
Location: Albuquerque NM
Posts: 577
Drives: 2010 Roadster 7AT
Rep Power: 307 |
__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar |
10-22-2013, 01:00 AM | #74 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251 |
that would work but it's a one tire fire
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
10-22-2013, 01:06 AM | #75 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251 |
This is the correct Diff FINAL DRIVE ASSY - 370Z (Z34) 2009+ 3.7L V6 (B/SPORT+T/SPORT) 6-Spd M/T :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Akuma intake install/review | FPenvy | Intake/Exhaust | 15 | 11-25-2012 04:33 PM |
ARK exhaust install and review | sofa_king | Intake/Exhaust | 16 | 02-24-2012 12:15 PM |
Berk CBE and HFC Install and Review | joshs09slvrZ | Intake/Exhaust | 42 | 09-20-2011 06:28 AM |
New Top Gear Review | fuzzywuzzy | Nissan 370Z General Discussions | 28 | 08-25-2011 10:22 AM |
NIssan 370Z Top Gear Australia Review (Full Video Inside) | AK370Z | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 24 | 06-18-2009 02:16 PM |